Oblique (swash) disc reciprocating a rod parallel to the shaft — dimension sheet Source: Xem Studio, https://xemstudio.com/objects/swash-plate-rod-mechanism/ (sheet CC BY 4.0; files Xem Studio Design License, https://xemstudio.com/license/) Basis: Xem Studio design following Brown No. 95 (1868) Catalog version: 2026-10-20 Sizes: see table below - Resize: multiply every length by one factor k and the motion stays identical: angles, ratios, timing and the formulas below do not change, because a mechanism's motion depends only on the ratios of its lengths. Here, scales with k: follower radius, stroke; stays the same: plate. - Resize: Scale base radius and lift together: the motion law and the pressure angle stay the same. Raising lift alone steepens the pressure angle and the follower can jam. - Resize: fit clearances stay in mm (a slide fit is the same gap at any size); keep every printed wall and pin at least two nozzle widths; mass grows with k³ but part strength only with k², so at k = 2 parts are about 8× heavier and 4× stronger: check pins and thin links when scaling up. - A disc fixed obliquely on a shaft: a rod parallel to the shaft, pressed against the disc's face, moves up and down once per turn — stroke 2 r tan θ at radius r (here 2 × 14 × tan 15° = 7.5 mm). - Catalog Ø40 × 15° swash plate and ball-ended follower; follower at 14 mm radius in a square guide, its Ø8 ball touching the face (centre 4.53 mm above the plate's hub centre). - Brown's No. 95 (oblique disc on an upright shaft giving reciprocating motion to a rod resting on it). - Parts (each has its own page): swash-plate, swash-follower-guide-sq8, linear-shafts-h6. - Brown's movement No. 95 (1868) shows it; this model is a Xem Studio design following his figure, every part at true size. parameter value plate Ø40, 15° follower radius 14 mm stroke 7.5 mm Files elsewhere (not hosted by Xem Studio; license as stated by the publisher): - Henry T. Brown (1868, public domain): Five Hundred and Seven Mechanical Movements — scan on archive.org — web — Publisher's page; dimensions are facts — https://archive.org/details/fivehundredseven00browiala - 507movements.com: Brown's movement No. 95: figure, his text and an animation — web — Publisher's page; dimensions are facts — https://507movements.com/mm_095.html Free files (Xem Studio Design License, Xem Studio; STEP + STL, 1 parts): https://xemstudio.com/files/hardware/swash-plate-rod-mechanism/index.json API: https://xemstudio.com/api/geometry?object=swash-plate-rod-mechanism