L corner brackets for 20, 30, 40, 45 mm and 1 in, 1.5 in T-slot extrusion — dimension sheet Source: Xem Studio, https://xemstudio.com/objects/t-slot-corner-brackets/ (sheet CC BY 4.0) Basis: L bracket as wide and tall as the profile pitch, one screw slot per leg on the slot centreline at ISO 273 / ASME B18.2.8 clearance, side gussets Catalog version: 2026-10-20 Sizes: see table below - Each bracket is an L the size of one profile cell with a gusset on each side; the legs sit flat on two profile faces and each leg's screw slot lies over the T-slot centreline. - Leg thickness is 0.15 × the pitch (3 mm minimum); slots are half the pitch long end to end. - The legs are flat (no locating tongue); a T-nut in the slot takes the screw. family size_mm leg_mm slot_mm screw 20-series (6 mm slot) 20 3 Ø5.5 × 10 M5 30-series (8 mm slot) 30 4.5 Ø6.6 × 15 M6 40-series (10 mm slot) 40 6 Ø9 × 20 M8 45-series (10 mm slot) 45 6.75 Ø9 × 22.5 M8 1 in 10-series 25.4 3.81 Ø7.14 × 12.7 1/4-20 1.5 in 15-series 38.1 5.71 Ø8.73 × 19.05 5/16-18 Files elsewhere (not hosted by Xem Studio; license as stated by the publisher): - Wikipedia: T-slot structural framing — web — CC BY-SA 4.0 (text) — https://en.wikipedia.org/wiki/T-slot_structural_framing - Wikipedia: T-slot nut — web — CC BY-SA 4.0 (text) — https://en.wikipedia.org/wiki/T-slot_nut Free files (CC BY 4.0, Xem Studio; STEP + STL, 6 parts): https://xemstudio.com/files/hardware/t-slot-corner-brackets/index.json API: https://xemstudio.com/api/geometry?object=t-slot-corner-brackets