Extrusion end feet for 20, 30, 40, 45 mm and 1 in, 1.5 in T-slot extrusion — dimension sheet Source: Xem Studio, https://xemstudio.com/objects/t-slot-feet/ (sheet CC BY 4.0) Basis: Square foot 1.6 × the profile, socket = the 1 × 1 profile outline (exact, corner radius included) 3 deep, clearance hole for a screw into the centre bore Catalog version: 2026-10-20 Sizes: see table below - Each foot is a 6 mm thick square 1.6 × the pitch with R4 corners, a 3 mm socket at the exact profile outline, a clearance hole for a screw into the centre bore, and a recess the pitch in diameter, 1.5 deep, underneath. - The screw is the largest standard thread whose tap drill fits the bore: M5 on 20-series (Ø4.2), M8 on 30 (Ø6.8), M12 on 40 (Ø10.5), M14 on 45 (Ø12.5), 1/4-20 on 1 in (Ø0.205 in), 5/16-18 on 1.5 in (Ø0.262 in). family foot_mm socket screw hole 20-series (6 mm slot) 32 × 32 × 6 1 × 1 outline, R1 Ø5.5 for M5 30-series (8 mm slot) 48 × 48 × 6 1 × 1 outline, R2 Ø9 for M8 40-series (10 mm slot) 64 × 64 × 6 1 × 1 outline, R3 Ø13.5 for M12 45-series (10 mm slot) 72 × 72 × 6 1 × 1 outline, R3 Ø15.5 for M14 1 in 10-series 40.64 × 40.64 × 6 1 × 1 outline Ø7.14 for 1/4-20 1.5 in 15-series 60.96 × 60.96 × 6 1 × 1 outline Ø8.73 for 5/16-18 Files elsewhere (not hosted by Xem Studio; license as stated by the publisher): - Wikipedia: T-slot structural framing — web — CC BY-SA 4.0 (text) — https://en.wikipedia.org/wiki/T-slot_structural_framing - Wikipedia: T-slot nut — web — CC BY-SA 4.0 (text) — https://en.wikipedia.org/wiki/T-slot_nut Free files (CC BY 4.0, Xem Studio; STEP + STL, 6 parts): https://xemstudio.com/files/hardware/t-slot-feet/index.json API: https://xemstudio.com/api/geometry?object=t-slot-feet