Library › Electronic components › Connectors ·

Screw terminal blocks: Phoenix MKDS 1,5 and MKDS 3 (5.0 / 5.08 mm), 2–6 positions

What size is a 5.08 mm screw terminal block? · Standard part · basis: KiCad 3D models from Phoenix Contact drawings; generic 5.08 mm 'KF301/KF128' blocks match MKDS 1,5 closely

Also called: 5.08mm terminal block, kf301, kf128, mkds 1.5, screw terminal dimensions, phoenix terminal block

Exact dimensions. Every file is drawn at true size with no tolerance added. The holes and pins that meet another part are listed below under Mating features, with the fit each joint needs; open those by your process's clearance before making the part. Mating features

sizes
15 in table

Notes

  • MKDS 1,5 (the common green 2–6 position block, 1.5 mm² wire, 5.08 mm pitch): 2-pos is about 10.2 × 9.4 × 10.2 mm; add 5.08 mm per position. The 5.00 mm pitch version is the metric twin.
  • MKDS 3 (2.5 mm², 5.08 mm): taller and deeper, about 12.5 mm high. Wire enters horizontally from the board edge; leave 15 mm for the wire and screwdriver access from above.
  • Printed enclosures: cut a slot 9.5 mm tall per block row at the board edge, 0.5 mm clearance each side.

Screw terminal blocks: Phoenix MKDS 1,5 and MKDS 3 (5.0 / 5.08 mm)… size chart

partbbox l (mm)bbox w (mm)bbox h (mm)
phoenix-mkds-1-5-2-5.08-1x02-horizontal17.310.99.8
phoenix-mkds-1-5-2-1x02-horizontal17.310.79.8
phoenix-mkds-1-5-3-5.08-1x03-horizontal17.316.09.8
phoenix-mkds-1-5-3-1x03-horizontal17.315.79.8
phoenix-mkds-1-5-4-5.08-1x04-horizontal21.117.39.8
phoenix-mkds-1-5-4-1x04-horizontal20.717.39.8
phoenix-mkds-1-5-5-5.08-1x05-horizontal26.117.39.8
phoenix-mkds-1-5-5-1x05-horizontal25.717.39.8
phoenix-mkds-1-5-6-5.08-1x06-horizontal31.217.39.8
phoenix-mkds-1-5-6-1x06-horizontal30.717.39.8
phoenix-mkds-3-2-5.08-1x02-horizontal23.011.210.7
phoenix-mkds-3-3-5.08-1x03-horizontal23.015.811.2
phoenix-mkds-3-4-5.08-1x04-horizontal23.020.911.2
phoenix-mkds-3-5-5.08-1x05-horizontal26.023.011.2
phoenix-mkds-3-6-5.08-1x06-horizontal31.123.011.2

Mating features

Drawn at the exact size. Open press, slide, run and socket features by your process's clearance (tolerances by process); leave designed gaps and clamp fits as drawn.

featureexactmates withfitfiles
MKDS 1,5 pins5.08 pitch (5.00 metric twin); 2-pos about 10.2 × 9.4 × 10.2, +5.08 per positionPCB footprint on 5.08 mm pitch (Phoenix Contact MKDS 1,5 drawing); wire 1.5 mm²designedphoenix-mkds-1-5*
wire entryhorizontal from the board edge; MKDS 3 (2.5 mm²) about 12.5 highslot 9.5 tall per block row at the board edge; 15 mm free for wire and screwdriver access (own sheet)designedall

Where the files are

Files below are rehosted from this library under its share-alike license, with its license and credits beside them. "verify" = check the license at the link before commercial use.

KiCadkicad-packages3D library (origin of these files)STEP, WRLCC BY-SA 4.0 with KiCad exception

Free files

★ Free files 15 parts. From the KiCad library contributors, rehosted with their license and credits. CC BY-SA 4.0 (KiCad library license, with the KiCad exception). index.json

Use this part in your AI. Your AI gets the exact sizes and files straight from Xem and can design a mount, case or adapter around it. Direct downloads here are limited to one file every 10 minutes; through your AI they are unlimited.

Connect Xem to your AI (free, no account, about a minute)
https://xemstudio.com/mcp
  1. Claude: Add to Claude
  2. ChatGPT (Plus or higher): open Connectors → Advanced → turn on Developer mode → Create → paste the address, no authentication → Create.
  3. Cursor: install with one click. VS Code: install with one click.
Other apps and full steps
phoenix-mkds-1-5-2-5.08-1x02-horizontalKiCad TerminalBlock_Phoenix: TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal; bbox 17.3 × 10.9 × 9.8 mmSTEP · STL
phoenix-mkds-1-5-2-1x02-horizontalKiCad TerminalBlock_Phoenix: TerminalBlock_Phoenix_MKDS-1,5-2_1x02_P5.00mm_Horizontal; bbox 17.3 × 10.7 × 9.8 mmSTEP · STL
phoenix-mkds-1-5-3-5.08-1x03-horizontalKiCad TerminalBlock_Phoenix: TerminalBlock_Phoenix_MKDS-1,5-3-5.08_1x03_P5.08mm_Horizontal; bbox 17.3 × 16.0 × 9.8 mmSTEP · STL
phoenix-mkds-1-5-3-1x03-horizontalKiCad TerminalBlock_Phoenix: TerminalBlock_Phoenix_MKDS-1,5-3_1x03_P5.00mm_Horizontal; bbox 17.3 × 15.7 × 9.8 mmSTEP · STL
phoenix-mkds-1-5-4-5.08-1x04-horizontalKiCad TerminalBlock_Phoenix: TerminalBlock_Phoenix_MKDS-1,5-4-5.08_1x04_P5.08mm_Horizontal; bbox 21.1 × 17.3 × 9.8 mmSTEP · STL
phoenix-mkds-1-5-4-1x04-horizontalKiCad TerminalBlock_Phoenix: TerminalBlock_Phoenix_MKDS-1,5-4_1x04_P5.00mm_Horizontal; bbox 20.7 × 17.3 × 9.8 mmSTEP · STL
phoenix-mkds-1-5-5-5.08-1x05-horizontalKiCad TerminalBlock_Phoenix: TerminalBlock_Phoenix_MKDS-1,5-5-5.08_1x05_P5.08mm_Horizontal; bbox 26.1 × 17.3 × 9.8 mmSTEP · STL
phoenix-mkds-1-5-5-1x05-horizontalKiCad TerminalBlock_Phoenix: TerminalBlock_Phoenix_MKDS-1,5-5_1x05_P5.00mm_Horizontal; bbox 25.7 × 17.3 × 9.8 mmSTEP · STL
phoenix-mkds-1-5-6-5.08-1x06-horizontalKiCad TerminalBlock_Phoenix: TerminalBlock_Phoenix_MKDS-1,5-6-5.08_1x06_P5.08mm_Horizontal; bbox 31.2 × 17.3 × 9.8 mmSTEP · STL
phoenix-mkds-1-5-6-1x06-horizontalKiCad TerminalBlock_Phoenix: TerminalBlock_Phoenix_MKDS-1,5-6_1x06_P5.00mm_Horizontal; bbox 30.7 × 17.3 × 9.8 mmSTEP · STL
phoenix-mkds-3-2-5.08-1x02-horizontalKiCad TerminalBlock_Phoenix: TerminalBlock_Phoenix_MKDS-3-2-5.08_1x02_P5.08mm_Horizontal; bbox 23.0 × 11.2 × 10.7 mmSTEP · STL
phoenix-mkds-3-3-5.08-1x03-horizontalKiCad TerminalBlock_Phoenix: TerminalBlock_Phoenix_MKDS-3-3-5.08_1x03_P5.08mm_Horizontal; bbox 23.0 × 15.8 × 11.2 mmSTEP · STL
phoenix-mkds-3-4-5.08-1x04-horizontalKiCad TerminalBlock_Phoenix: TerminalBlock_Phoenix_MKDS-3-4-5.08_1x04_P5.08mm_Horizontal; bbox 23.0 × 20.9 × 11.2 mmSTEP · STL
phoenix-mkds-3-5-5.08-1x05-horizontalKiCad TerminalBlock_Phoenix: TerminalBlock_Phoenix_MKDS-3-5-5.08_1x05_P5.08mm_Horizontal; bbox 26.0 × 23.0 × 11.2 mmSTEP · STL
phoenix-mkds-3-6-5.08-1x06-horizontalKiCad TerminalBlock_Phoenix: TerminalBlock_Phoenix_MKDS-3-6-5.08_1x06_P5.08mm_Horizontal; bbox 31.1 × 23.0 × 11.2 mmSTEP · STL
Let your AI pull this. Add https://xemstudio.com/mcp to Claude, ChatGPT, Cursor or any MCP client (free, no account, one minute) and it can look up exact sizes, mating fits and free STEP/STL from every chat.
Set it up →

Plain text: sheet.txt · JSON: /api/geometry?object=terminal-blocks

Screw terminal blocks: Phoenix MKDS 1,5 and MKDS 3 (5.0 / 5.08 mm), 2–6 positions, isometric render of a generated part
Render of phoenix-mkds-1-5-3-5.08-1x03-horizontal from the free STEP; not to scale.

Fits with

Questions

What is the pitch of the green screw terminal blocks?

5.08 mm (0.2 in) for the common ones (MKDS 1,5/5.08, KF301); 5.00 mm metric and 3.5 / 3.81 / 2.54 mm versions exist and don't interchange.

How tall is a 5.08 mm terminal block?

About 10.2 mm for MKDS 1,5 (1.5 mm²), 12.5 mm for MKDS 3 (2.5 mm²); width is 5.08 mm per position plus 0.1.