Tri-clamp diaphragm head, 1.5 and 2 in: a membrane clamped in place of the gasket — dimension sheet Source: Xem Studio, https://xemstudio.com/objects/tri-clamp-diaphragm-head/ (sheet CC BY 4.0; files Xem Studio Design License, https://xemstudio.com/license/) Basis: ISO 2852 clamp face and 20° back cone from the ferrule on this site (flat face with the gasket groove on C2, rim 2.85, back cone continued down to the tube OD at the ferrule's own hub height), ASME BPE tube bores; membrane cavity sized from the diaphragm stroke Catalog version: 2026-10-20 Sizes: see table below - The head is a cap-style part that clamps onto any standard ferrule with the standard clamp. The membrane goes where the gasket would: its bulges sit in the gasket grooves of the ferrule and the head, its web between the two flat faces, so the clamp closes exactly as on a Type B gasket. - The back of the clamp face is the ferrule's 20° cone, continued down to the tube OD (Ø38.1 / Ø50.8) at 5.25 / 5.25 mm from the face, so the clamp groove meets the head just as it meets a ferrule (0.4 mm take-up, 0.6 mm squeeze). Behind that the head is a neck at the tube OD. - Behind the membrane: a cavity at the bore (Ø34.8 / Ø47.5) deep enough for the centre disc and its nuts at full outward travel (1.5 in ±5, 2 in ±7.5 mm), a pocket for the rod boss, a Ø3 rod guide straight through a Ø16 boss, and four Ø4 vents so the space behind the membrane stays at air pressure. - Fit: the Ø3 guide is a running fit on the Ø3 rod; the face is a clamp face. Everything else is drawn at size. size_in flange_mm groove_mm neck_od_mm cavity_dia_mm cavity_depth_mm back_mm guide_top_mm design_stroke_mm 2 64.0 56.5 50.8 47.5 13.15 17.0 30.0 15.0 1.5 50.5 43.5 38.1 34.8 10.65 14.5 27.5 10.0 Files elsewhere (not hosted by Xem Studio; license as stated by the publisher): - ISO (via iTeh sample): ISO 2852 clamp liners: face profile and flange / groove diameters — PDF — standard excerpt; dimensions are facts — https://cdn.standards.iteh.ai/samples/7850/eb49c396488d408c8ced3e2961d76cf3/ISO-2852-1974.pdf - ASME: BPE Bioprocessing Equipment (clamp fitting dimensions, tube OD and wall) — standard — ASME; dimensions are facts [verify license at link] — https://www.asme.org/codes-standards/find-codes-standards/bpe-bioprocessing-equipment - Long Earth Society: Engine builds — web, video — LES site — https://longearthsociety.com/engineering/ Free files (Xem Studio Design License, Xem Studio; STEP + STL, 2 parts): https://xemstudio.com/files/hardware/tri-clamp-diaphragm-head/index.json API: https://xemstudio.com/api/geometry?object=tri-clamp-diaphragm-head