Tri-clamp end cap, 6 mm flat: 1.5 and 2 in — dimension sheet Source: Xem Studio, https://xemstudio.com/objects/tri-clamp-end-cap/ (sheet CC BY 4.0) Basis: ISO 2852 face (flat to the centre, gasket groove on C2: 1.6 deep, R1.2, 23° walls, P2 0.8; 2.85 mm rim, 20° back) on a 6 mm solid disc Catalog version: 2026-10-20 Sizes: see table below - A flat end cap with the ISO 2852 face, 6.0 mm thick overall: Ø50.5 for the 1–1½ in flange, Ø64.0 for 2 in. - Face: flat from the centre to the flange OD with the ISO 2852 gasket groove centred on Ø43.5 / Ø56.5 (1.6 deep, bottom radius 1.2, walls 23°, edge radius 0.8, 4.01 wide), the 2.85 mm rim, and the 20° back cone carried straight on from the rim to the flat back (flat back Ø33.2 on 1.5 in, Ø46.7 on 2 in), the same cone as the ferrule's, so the clamp groove seats on the cap exactly as on a ferrule. - This is the 6 mm cap the engine heads on this site are built on. The BPE 16AMP caps (6.35 mm at these sizes) are on the sanitary end-cap page. size_in flange_od_mm groove_dia_mm groove_depth_mm thickness_mm 1.5 50.5 43.5 1.6 6.0 2 64.0 56.5 1.6 6.0 Files elsewhere (not hosted by Xem Studio; license as stated by the publisher): - L.J. Star: Sanitary clamp gaskets: a good seal compresses the gasket about 0.3 mm — web — maker page [verify license at link] — https://www.ljstar.com/ - Rubber Fab: Tri-Clamp gasket dimensional chart: gasket ID, OD and bead diameter per size (2 in bead 2.22 in / 56.50 mm, 1.5 in 1.71 / 43.50, 3 in 3.29 / 83.50) — PDF — maker chart; dimensions are facts [verify license at link] — https://shop.andersonprocess.com/media/assets/product/documents/rubber-fab-tri-clamp-dimensions.pdf - ISO (via iTeh sample): ISO 2852:1974 clamp liners with gaskets (face and gasket profile, §6.1 and §8) — PDF — standard excerpt; dimensions are facts — https://cdn.standards.iteh.ai/samples/7850/eb49c396488d408c8ced3e2961d76cf3/ISO-2852-1974.pdf - McMaster-Carr: Sanitary caps and gaskets (free STEP per part, for your own design use; no redistribution) — STEP, PDF — McMaster-Carr site terms: personal design use, no redistribution [verify license at link] — https://www.mcmaster.com/products/sanitary-fittings/ Free files (CC BY 4.0, Xem Studio; STEP + STL, 2 parts): https://xemstudio.com/files/hardware/tri-clamp-end-cap/index.json API: https://xemstudio.com/api/geometry?object=tri-clamp-end-cap