# Tri-clamp gasket, ISO 2852 Type B: 1.5 and 2 in

> What are the dimensions of a 2 inch tri-clamp gasket?

- Category: Tri-clamp & pipe › Clamp fittings
- Kind: Hardware
- Basis: ISO 2852 Type B (Figure 3): web T1 1.7, a bulge each side on the groove diameter (U 5.5 overall, R5 1.2, R4 0.4), inner lip T4 1.1 × T2 2.8; measured from the files
- Page: https://xemstudio.com/objects/tri-clamp-gasket/ · JSON: https://xemstudio.com/api/geometry?object=tri-clamp-gasket · Plain text: https://xemstudio.com/objects/tri-clamp-gasket/sheet.txt
- License: dimension sheet CC BY 4.0 (Xem Studio); files CC BY 4.0 or their publisher's license
- Use in every chat: add https://xemstudio.com/mcp as a connector (https://xemstudio.com/use-with-ai/)

**Exact dimensions.** Every file is drawn at true size with no tolerance added. The holes and pins that meet another part are listed below under Mating features, with the fit each joint needs; open those by your process's clearance before making the part.

## Notes

- The Type B gasket between two ISO 2852 faces: a 1.7 mm web on the flat faces, a bulge on each side centred on the groove diameter that sits in each face's gasket groove (5.5 mm over both; each 1.9 proud of the web in a 1.6 deep groove, so 0.3 squeeze each side, designed), and an inner lip into the bore.
- 2 in: OD Ø63.0, bulges on Ø56.5, lip ID Ø45.3. 1.5 in: OD Ø49.5, bulges on Ø43.5, lip ID Ø32.6. The lip is 1.1 mm thick radially inside the bore and 2.8 mm long, centred on the joint plane: 0.55 mm past each face. The published gasket ID (2 in 47.7, 1.5 in 35.0) is the web's ID where the lip starts.
- The sanitary-clamp gasket page carries the same profile for every size ½ to 4 in.

## Mating features (exact size; open press / slide / run / socket by your process clearance, leave designed and clamp as drawn)

| feature | exact | mates with | fit | files |
|---|---|---|---|---|
| gasket bulges | on the groove Ø per size (Ø43.5 / Ø56.5), 5.5 overall, R5 1.2 | the two faces' gasket grooves (1.6 deep): 0.3 squeeze each side | designed | tc-gasket-* |
| gasket lip | ID = bore − 2.2, 2.8 long | the bore, 0.55 past each face | designed | tc-gasket-* |

## Sizes

| size_in | od_mm | bulge_on_dia_mm | web_id_mm | lip_id_mm | overall_mm | web_mm | lip_length_mm |
|---|---|---|---|---|---|---|---|
| 1.5 | 49.5 | 43.5 | 35.0 | 32.6 | 5.5 | 1.7 | 2.8 |
| 2 | 63.0 | 56.5 | 47.7 | 45.3 | 5.5 | 1.7 | 2.8 |

## Where the files are

- L.J. Star: [Sanitary clamp gaskets: a good seal compresses the gasket about 0.3 mm](https://www.ljstar.com/) — web — maker page (verify at link)
- Rubber Fab: [Tri-Clamp gasket dimensional chart: gasket ID, OD and bead diameter per size (2 in bead 2.22 in / 56.50 mm, 1.5 in 1.71 / 43.50, 3 in 3.29 / 83.50)](https://shop.andersonprocess.com/media/assets/product/documents/rubber-fab-tri-clamp-dimensions.pdf) — PDF — maker chart; dimensions are facts (verify at link)
- ISO (via iTeh sample): [ISO 2852:1974 clamp liners with gaskets (face and gasket profile, §6.1 and §8)](https://cdn.standards.iteh.ai/samples/7850/eb49c396488d408c8ced3e2961d76cf3/ISO-2852-1974.pdf) — PDF — standard excerpt; dimensions are facts
- McMaster-Carr: [Sanitary caps and gaskets (free STEP per part, for your own design use; no redistribution)](https://www.mcmaster.com/products/sanitary-fittings/) — STEP, PDF — McMaster-Carr site terms: personal design use, no redistribution (verify at link)

## Free STEP/STL (2 parts, CC BY 4.0, Xem Studio)

Index: https://xemstudio.com/files/hardware/tri-clamp-gasket/index.json

- tc-gasket-1.5in: [STEP](https://xemstudio.com/files/hardware/tri-clamp-end-cap/tc-gasket-1.5in.step) · [STL](https://xemstudio.com/files/hardware/tri-clamp-end-cap/tc-gasket-1.5in.stl) — 1.5 in gasket, ISO 2852 Type B: OD 49.5, 1.7 web, bulge on Ø43.5 each side (5.5 overall, tip R1.2, fillet R0.4), lip ID 32.6 × 2.8 long
- tc-gasket-2in: [STEP](https://xemstudio.com/files/hardware/tri-clamp-end-cap/tc-gasket-2in.step) · [STL](https://xemstudio.com/files/hardware/tri-clamp-end-cap/tc-gasket-2in.stl) — 2 in gasket, ISO 2852 Type B: OD 63.0, 1.7 web, bulge on Ø56.5 each side (5.5 overall, tip R1.2, fillet R0.4), lip ID 45.3 × 2.8 long

## How it fits

### Goes in or on
- [Tri-clamp (Tri-Clover) sanitary ferrule, 1/2 to 4 inch](https://xemstudio.com/objects/tri-clamp-ferrule/): bulge in the face's gasket groove

### Connects to
- [Tri-clamp end cap, 6 mm flat: 1.5 and 2 in](https://xemstudio.com/objects/tri-clamp-end-cap/): seals the cap to a ferrule
- [Tri-clamp clamp, two-bolt: every flange size ½ to 4 in](https://xemstudio.com/objects/tri-clamp-clamps/): the clamp squeezes the web

### Alternatives
- [Tri-clamp flat gasket (hot joint, bore ID): 1.7 mm ring, ½ to 4 in](https://xemstudio.com/objects/tri-clamp-hot-gasket/): flat ring for a hot joint
- [Sanitary clamp gaskets, ISO 2852 Type B: ½ to 4 in](https://xemstudio.com/objects/sanitary-clamp-gaskets/): all sizes ½ to 4 in

## Questions

**What are 1.5 and 2 inch tri-clamp gasket dimensions?**

1.5 in: Ø49.5 OD, Ø32.6 lip ID. 2 in: Ø63.0 OD, Ø45.3 lip ID. Both: 1.7 mm web, 5.5 mm over the two bulges, lip 2.8 mm long.

**Where does the gasket bead sit?**

In the gasket groove of each face, centred on the groove diameter (Ø43.5 / Ø56.5): a 1.6 mm deep groove with a 1.2 bottom radius; the bulge stands 1.9 proud of the web, so it is squeezed 0.3 mm.

## Fits with

- [Tri-clamp end cap, 6 mm flat: 1.5 and 2 in](https://xemstudio.com/objects/tri-clamp-end-cap/)
- [Sanitary clamp gaskets, ISO 2852 Type B: ½ to 4 in](https://xemstudio.com/objects/sanitary-clamp-gaskets/)
- [Tri-clamp flat gasket (hot joint, bore ID): 1.7 mm ring, ½ to 4 in](https://xemstudio.com/objects/tri-clamp-hot-gasket/)
- [Tri-clamp clamp, two-bolt: every flange size ½ to 4 in](https://xemstudio.com/objects/tri-clamp-clamps/)
- [Tri-clamp (Tri-Clover) sanitary ferrule, 1/2 to 4 inch](https://xemstudio.com/objects/tri-clamp-ferrule/)
