Library › Hardware › Heat transfer ·

Burner shroud for a horizontal finned 2 in hot spool

What shroud holds a flame round a horizontal tri-clamp tube? · Hardware · basis: Design values; fins from the hot spool

Also called: horizontal stirling burner shroud

Long Earth Society build part. The flame shroud of my horizontal gamma. Long Earth Society

Exact dimensions. Every file is drawn at true size with no tolerance added. The holes and pins that meet another part are listed below under Mating features, with the fit each joint needs; open those by your process's clearance before making the part. Mating features

sizes
3 in table

Notes

  • A sheet shell round the fins of a lying hot spool: the flame comes up through the Ø40 inlet under the fins, is held round them by the shell and leaves by three holes on top. Its legs stand on the frame on the side away from the torch stand's foot.

Burner shroud for a horizontal finned 2 in hot spool size chart

featurevalue
shellØ92 / Ø88
inletØ40 below the fins
exhaust3 × Ø16 on top

Mating features

Drawn at the exact size. Open press, slide, run and socket features by your process's clearance (tolerances by process); leave designed gaps and clamp fits as drawn.

featureexactmates withfitfiles
lid holeØ54.82 in tube Ø50.8 (no contact)designedall
feet holes2 × Ø4.5M4 clearancedesignedall

Where the files are

Other publishers' files are linked, not hosted. "verify" = check the license at the link before commercial use.

Long Earth SocietyEngine buildsweb, videoLES site

Free files

★ Free files 1 parts. Xem Studio design: free to use, print and sell things from; not to be republished as files. Xem Studio Design License. index.json

Use this part in your AI. Your AI gets the exact sizes and files straight from Xem and can design a mount, case or adapter around it. Direct downloads here are limited to one file every 10 minutes; through your AI they are unlimited.

Connect Xem to your AI (free, no account, about a minute)
https://xemstudio.com/mcp
  1. Claude: Add to Claude
  2. ChatGPT (Plus or higher): open Connectors → Advanced → turn on Developer mode → Create → paste the address, no authentication → Create.
  3. Cursor: install with one click. VS Code: install with one click.
Other apps and full steps
burner-shroud-2in-horizontalhorizontal burner shroud (world, base top z 8): shell Ø92 / Ø88 round the hot spool's fins, closed outer end, lid with a Ø54.8 hole, Ø40 flame inlet below, three Ø16 exhausts on top, two legs on +Y with Ø4.5 feetSTEP · STL
Let your AI pull this. Add https://xemstudio.com/mcp to Claude, ChatGPT, Cursor or any MCP client (free, no account, one minute) and it can look up exact sizes, mating fits and free STEP/STL from every chat.
Set it up →

Plain text: sheet.txt · JSON: /api/geometry?object=tri-clamp-horizontal-burner-shroud

Burner shroud for a horizontal finned 2 in hot spool, isometric render of a generated part
Render of burner-shroud-2in-horizontal from the free STEP; not to scale.

Fits with

Questions

What burner?

A propane or butane torch head in the torch stand, pointing up.