# Tri-clamp half gasket for a clamped leaf or rim: 2 in, web 0.6 or 0.45

> How do I seal a flat plate clamped in a tri-clamp joint?

- Category: Tri-clamp & pipe › Clamp fittings
- Kind: Hardware
- Basis: ISO 2852 Type B section split at the joint plane: one bulge (R5 1.2, R4 0.4, 1.9 above the web) in one face's 1.6 deep gasket groove with the Type B's 0.3 squeeze, web so that two webs and the plate make the 1.7 joint
- Page: https://xemstudio.com/objects/tri-clamp-leaf-half-gasket/ · JSON: https://xemstudio.com/api/geometry?object=tri-clamp-leaf-half-gasket · Plain text: https://xemstudio.com/objects/tri-clamp-leaf-half-gasket/sheet.txt
- License: dimension sheet CC BY 4.0 (Xem Studio); files CC BY 4.0 or their publisher's license
- Use in every chat: add https://xemstudio.com/mcp as a connector (https://xemstudio.com/use-with-ai/)

**Exact dimensions.** Every file is drawn at true size with no tolerance added. The holes and pins that meet another part are listed below under Mating features, with the fit each joint needs; open those by your process's clearance before making the part.

## Notes

- Two of them sandwich a flat plate (a flexure leaf, the liner's rim) in a 2 in joint: each bulge sits in its ferrule's gasket groove, each web lies on the flat face, the plate between the webs. Web 0.6 for a 0.5 plate, 0.45 for a 0.8 plate: 0.6 + 0.5 + 0.6 = 0.45 + 0.8 + 0.45 = 1.7, the Type B web, so the clamp closes as usual.
- Ratings, as facts: the gasket must be rated above the relief setting (15 bar gauge) at its temperature; helium permeates silicone faster than PTFE; PTFE cold-flows under sustained load and heat. Cut or ordered to this drawing.

## Mating features (exact size; open press / slide / run / socket by your process clearance, leave designed and clamp as drawn)

| feature | exact | mates with | fit | files |
|---|---|---|---|---|
| bulge | on Ø56.5, 1.9 above the web (ISO 2852 R5 1.2, R4 0.4) | ferrule gasket groove 1.6 deep (0.3 squeeze) | clamp | all |
| web | 0.6 / 0.45 thick to Ø63 | ferrule land and the leaf or rim | clamp | all |

## Sizes

| web_mm | plate_mm | bulge_above_web_mm | bulge_on_dia_mm | od_mm | id_mm |
|---|---|---|---|---|---|
| 0.6 | 0.5 | 1.9 | 56.5 | 63 | 47.5 |
| 0.45 | 0.8 | 1.9 | 56.5 | 63 | 47.5 |

## Where the files are

- ISO (via iTeh sample): [ISO 2852 clamp liners: face profile and flange / groove diameters](https://cdn.standards.iteh.ai/samples/7850/eb49c396488d408c8ced3e2961d76cf3/ISO-2852-1974.pdf) — PDF — standard excerpt; dimensions are facts
- ASME: [BPE Bioprocessing Equipment (tube OD and wall, clamp fittings)](https://www.asme.org/codes-standards/find-codes-standards/bpe-bioprocessing-equipment) — standard — ASME; dimensions are facts (verify at link)
- Long Earth Society: [Engine builds](https://longearthsociety.com/engineering/) — web, video — LES site

## Free STEP/STL (2 parts, CC BY 4.0, Xem Studio)

Index: https://xemstudio.com/files/hardware/tri-clamp-leaf-half-gasket/index.json

- leaf-half-gasket-2in-w0.6: [STEP](https://xemstudio.com/files/hardware/tri-clamp-leaf-half-gasket/leaf-half-gasket-2in-w0.6.step) · [STL](https://xemstudio.com/files/hardware/tri-clamp-leaf-half-gasket/leaf-half-gasket-2in-w0.6.stl) — half gasket: web 0.60 thick from Ø47.5 to Ø63, ISO 2852 bulge on Ø56.5 standing 1.9 into one face's gasket groove (1.6 deep + 0.3 squeeze); two per leaf, bulges outward
- leaf-half-gasket-2in-w0.45: [STEP](https://xemstudio.com/files/hardware/tri-clamp-leaf-half-gasket/leaf-half-gasket-2in-w0.45.step) · [STL](https://xemstudio.com/files/hardware/tri-clamp-leaf-half-gasket/leaf-half-gasket-2in-w0.45.stl) — half gasket: web 0.45 thick from Ø47.5 to Ø63, ISO 2852 bulge on Ø56.5 standing 1.9 into one face's gasket groove (1.6 deep + 0.3 squeeze); two per leaf, bulges outward

## Questions

**Why not a Type B gasket each side?**

Two full gaskets plus the plate would be 1.7 + 1.7 + plate: too thick for the clamp to close.

## Fits with

- [Tri-clamp flexure leaf: spiral planar spring clamped in a 2 in joint like a gasket](https://xemstudio.com/objects/tri-clamp-flexure-leaf/)
- [2 in tri-clamp inner liner, Ø40 bore, rim clamped in the joint](https://xemstudio.com/objects/tri-clamp-inner-liner-40-bore/)
