# Split burner shroud for a vertical 2 in tri-clamp hot end

> How do I keep a burner flame on a vertical tri-clamp hot end?

- Category: Hardware › Heat transfer
- Kind: Hardware
- Basis: Design values: shell 6 mm outside the Ø76 fins, open bottom over the torch stand, lid clamped on the tube
- Page: https://xemstudio.com/objects/tri-clamp-split-burner-shroud/ · JSON: https://xemstudio.com/api/geometry?object=tri-clamp-split-burner-shroud · Plain text: https://xemstudio.com/objects/tri-clamp-split-burner-shroud/sheet.txt
- License: dimension sheet CC BY 4.0 (Xem Studio); files Xem Studio Design License (free to use and sell from, not to redistribute as files: https://xemstudio.com/license/)
- Use in every chat: add https://xemstudio.com/mcp as a connector (https://xemstudio.com/use-with-ai/)

**Exact dimensions.** Every file is drawn at true size with no tolerance added. The holes and pins that meet another part are listed below under Mating features, with the fit each joint needs; open those by your process's clearance before making the part.

## Notes

- Two halves that clamp the hot spool's tube with their lids (2 × M4 × 20) just above the fins and hang round them, open at the bottom: the torch or burner below fires up into it, the gas leaves through six windows under the lid.
- It touches only the tube at the lid. The heat source is the builder's choice: a propane or butane torch head in the torch stand, or a small gas burner firing into the open bottom.

## Mating features (exact size; open press / slide / run / socket by your process clearance, leave designed and clamp as drawn)

| feature | exact | mates with | fit | files |
|---|---|---|---|---|
| lid bore | Ø50.8 | hot spool tube OD | clamp | all |
| split | 1.0 total (0.5 per half) | the other half | clamp | all |
| ear holes | Ø4.5 | M4 clearance (ISO 273 medium) | designed | all |
| shell | r 44–46 | fins and flame (no contact) | designed | all |

## Sizes

| feature | value |
|---|---|
| shell | r 44–46 |
| span | −12 to 82.5 above the hot end |
| lid | clamps Ø50.8 |

## Where the files are

- Long Earth Society: [Engine builds](https://longearthsociety.com/engineering/) — web, video — LES site

## Free STEP/STL (1 parts, Xem Studio Design License, Xem Studio)

Index: https://xemstudio.com/files/hardware/tri-clamp-split-burner-shroud/index.json · license: https://xemstudio.com/files/hardware/tri-clamp-split-burner-shroud/LICENSE.md

- shroud-half-2in-split: [STEP](https://xemstudio.com/files/hardware/tri-clamp-split-burner-shroud/shroud-half-2in-split.step) · [STL](https://xemstudio.com/files/hardware/tri-clamp-split-burner-shroud/shroud-half-2in-split.stl) — shroud half: shell r 44–46 from 12 below the hot end to the lid, lid clamps the tube 76.5–82.5, 3 exhaust windows, ears with one M4

## Questions

**Does it carry the engine?**

No: the hangers do.

## Fits with

- [Tri-clamp closed-end spool: 2 in × 152.4 mm (6 in) with a welded closed end](https://xemstudio.com/objects/tri-clamp-closed-end-spool/)
- [Clamp-on hot-end fin sleeve for a 2 in tri-clamp tube (optional)](https://xemstudio.com/objects/tri-clamp-hot-end-fin-sleeve/)
- [Torch stand for a horizontal 2 in tri-clamp tube](https://xemstudio.com/objects/tri-clamp-torch-stand/)
