# Tri-clamp spool (two ferrules on a tube), 1.5 and 2 inch

> What are the face-to-face lengths and volumes of 1.5 and 2 inch tri-clamp spools?

- Category: Tri-clamp & pipe › Clamp fittings
- Kind: Hardware
- Basis: ISO 2852 faces on ASME BPE 16 ga tube; catalog lengths
- Page: https://xemstudio.com/objects/tri-clamp-spool/ · JSON: https://xemstudio.com/api/geometry?object=tri-clamp-spool · Plain text: https://xemstudio.com/objects/tri-clamp-spool/sheet.txt
- License: dimension sheet CC BY 4.0 (Xem Studio); files CC BY 4.0 or their publisher's license
- Use in every chat: add https://xemstudio.com/mcp as a connector (https://xemstudio.com/use-with-ai/)

**Exact dimensions.** Every file is drawn at true size with no tolerance added. The holes and pins that meet another part are listed below under Mating features, with the fit each joint needs; open those by your process's clearance before making the part.

## Notes

- Face-to-face length is the spool's stated length. Internal volume sets a thermoacoustic engine's resonance; volumes assume 16 ga tube.
- 2 in bore: 50.8 − 2×1.65 = 47.5 mm → 17.7 cm³ per cm. 1.5 in: 34.8 mm → 9.5 cm³ per cm.
- Stack-up per joint: the faces of a clamped joint sit 1.7 mm apart (the gasket web; ISO 2852 quotes 2.1 compressed). A clamp adds about 10 mm of radial envelope beyond the flange.

## Mating features (exact size; open press / slide / run / socket by your process clearance, leave designed and clamp as drawn)

| feature | exact | mates with | fit | files |
|---|---|---|---|---|
| faces | ISO 2852 | clamp + Type B gasket | clamp | all |

## Sizes

| size_in | length_in | length_mm | bore_mm | volume_cm3 |
|---|---|---|---|---|
| 1.5 | 3 | 76.2 | 34.8 | 72 |
| 1.5 | 6 | 152.4 | 34.8 | 145 |
| 1.5 | 12 | 304.8 | 34.8 | 290 |
| 2 | 3 | 76.2 | 47.5 | 135 |
| 2 | 6 | 152.4 | 47.5 | 270 |
| 2 | 12 | 304.8 | 47.5 | 540 |
| 2 | 18 | 457.2 | 47.5 | 810 |

## Where the files are

- L.J. Star: [Sanitary clamp gaskets: a good seal compresses the gasket about 0.3 mm](https://www.ljstar.com/) — web — maker page (verify at link)
- Rubber Fab: [Tri-Clamp gasket dimensional chart: gasket ID, OD and bead diameter per size (2 in bead 2.22 in / 56.50 mm, 1.5 in 1.71 / 43.50, 3 in 3.29 / 83.50)](https://shop.andersonprocess.com/media/assets/product/documents/rubber-fab-tri-clamp-dimensions.pdf) — PDF — maker chart; dimensions are facts (verify at link)
- ISO (via iTeh sample): [ISO 2852:1974 clamp liners with gaskets (face and gasket profile, §6.1 and §8)](https://cdn.standards.iteh.ai/samples/7850/eb49c396488d408c8ced3e2961d76cf3/ISO-2852-1974.pdf) — PDF — standard excerpt; dimensions are facts
- McMaster-Carr: [Sanitary tube spools (free STEP per part, for your own design use; no redistribution)](https://www.mcmaster.com/products/sanitary-fittings/) — STEP, PDF — McMaster-Carr site terms: personal design use, no redistribution (verify at link)
- Glacier Tanks: [Tri-clamp spools (dimensions on product pages)](https://www.glaciertanks.com/tri-clamp-spools) — web, PDF — vendor catalog (verify at link)

## Free STEP/STL (7 parts, CC BY 4.0, Xem Studio)

Index: https://xemstudio.com/files/hardware/tri-clamp-spool/index.json

- tc-spool-1.5in-3in: [STEP](https://xemstudio.com/files/hardware/tri-clamp-spool/tc-spool-1.5in-3in.step) · [STL](https://xemstudio.com/files/hardware/tri-clamp-spool/tc-spool-1.5in-3in.stl) — 1.5 in spool, 76.2 mm face to face, 16 ga; ISO 2852 faces
- tc-spool-1.5in-6in: [STEP](https://xemstudio.com/files/hardware/tri-clamp-spool/tc-spool-1.5in-6in.step) · [STL](https://xemstudio.com/files/hardware/tri-clamp-spool/tc-spool-1.5in-6in.stl) — 1.5 in spool, 152.4 mm face to face, 16 ga; ISO 2852 faces
- tc-spool-1.5in-12in: [STEP](https://xemstudio.com/files/hardware/tri-clamp-spool/tc-spool-1.5in-12in.step) · [STL](https://xemstudio.com/files/hardware/tri-clamp-spool/tc-spool-1.5in-12in.stl) — 1.5 in spool, 304.8 mm face to face, 16 ga; ISO 2852 faces
- tc-spool-2in-3in: [STEP](https://xemstudio.com/files/hardware/tri-clamp-spool/tc-spool-2in-3in.step) · [STL](https://xemstudio.com/files/hardware/tri-clamp-spool/tc-spool-2in-3in.stl) — 2 in spool, 76.2 mm face to face, 16 ga; ISO 2852 faces
- tc-spool-2in-6in: [STEP](https://xemstudio.com/files/hardware/tri-clamp-spool/tc-spool-2in-6in.step) · [STL](https://xemstudio.com/files/hardware/tri-clamp-spool/tc-spool-2in-6in.stl) — 2 in spool, 152.4 mm face to face, 16 ga; ISO 2852 faces
- tc-spool-2in-12in: [STEP](https://xemstudio.com/files/hardware/tri-clamp-spool/tc-spool-2in-12in.step) · [STL](https://xemstudio.com/files/hardware/tri-clamp-spool/tc-spool-2in-12in.stl) — 2 in spool, 304.8 mm face to face, 16 ga; ISO 2852 faces
- tc-spool-2in-18in: [STEP](https://xemstudio.com/files/hardware/tri-clamp-spool/tc-spool-2in-18in.step) · [STL](https://xemstudio.com/files/hardware/tri-clamp-spool/tc-spool-2in-18in.stl) — 2 in spool, 457.2 mm face to face, 16 ga; ISO 2852 faces

## How it fits

### Parts that fit it
- [Mesh cage for 1.5 and 2 in tri-clamp spools (Ø34.8 and Ø47.5)](https://xemstudio.com/objects/tri-clamp-mesh-cage/): cage OD = spool bore Ø47.5 / Ø34.8 (socket)
- [Slotted hollow pistons for tri-clamp spools: Ø31.8, Ø44.5 and Ø69.9](https://xemstudio.com/objects/tri-clamp-slotted-hollow-pistons/): Ø44.5 in the Ø47.5 bore, 1.5 mm radial gap
- [Tri-clamp end cap with a Ø3 rod bore and 4 mm hose barb, 1.5, 2 and 3 in](https://xemstudio.com/objects/tri-clamp-cap-rod-bore-hose-barb/): ISO 2852 face on the spool ferrule
- [Tri-clamp end cap with a Ø15.9 socket for a 10 mL syringe, 1.5, 2 and 3 in](https://xemstudio.com/objects/tri-clamp-cap-syringe-socket/): ISO 2852 face on the spool or tee ferrule
- [Tri-clamp instrument cap with Ø6, Ø4 and Ø3 probe ports, 1.5, 2 and 3 in](https://xemstudio.com/objects/tri-clamp-instrument-cap/): ISO 2852 face on any ferrule of its size
- [Tri-clamp end cap with two 623 bearing towers and a Ø3 rod bore, 1.5, 2 and 3 in](https://xemstudio.com/objects/tri-clamp-cap-623-bearing-towers/): ISO 2852 face on the cold-end ferrule
- [Honeycomb and spiral stacks for tri-clamp spools: Ø34.8, Ø47.5 and Ø72.9](https://xemstudio.com/objects/tri-clamp-honeycomb-spiral-stacks/): stack OD = spool bore
- [Tri-clamp end cap with a Ø40 speaker socket, 1.5, 2 and 3 in](https://xemstudio.com/objects/tri-clamp-cap-speaker-socket/): ISO 2852 face on the resonator's open ferrule
- [Tri-clamp end cap with 608 bearing towers for a Ø8 shaft, 1.5, 2 and 3 in](https://xemstudio.com/objects/tri-clamp-cap-608-bearing-towers/): ISO 2852 face on the open ferrule
- [Tri-clamp end cap with Ø60, Ø80 and Ø100 flexure-spring seats](https://xemstudio.com/objects/tri-clamp-cap-flexure-seats/): ISO 2852 face on the open ferrule
- [2 in tri-clamp cap with two gear-shaft walls](https://xemstudio.com/objects/tri-clamp-cap-gear-shaft-walls-2in/): ISO 2852 face on the ferrule with a gasket
- [Tri-clamp heat shield washer: 0.6 mm, ½ to 4 in tube](https://xemstudio.com/objects/tri-clamp-heat-shield/): bore = flange OD, slides over the rim and down the tube

### Connects to
- [Tri-clamp clamp, two-bolt: every flange size ½ to 4 in](https://xemstudio.com/objects/tri-clamp-clamps/): one clamp per ferrule joint
- [Tri-clamp end cap, 6 mm flat: 1.5 and 2 in](https://xemstudio.com/objects/tri-clamp-end-cap/): flat cap and Type B gasket
- [Hollow loose-fit pistons for tri-clamp spools: Ø33.6, Ø46 and Ø70.9](https://xemstudio.com/objects/tri-clamp-hollow-pistons/): heads with rod guide, crank, power or instrument ports

### Alternatives
- [Tri-clamp cups: closed-end spools (ferrule on a capped tube), 1.5, 2 and 3 in](https://xemstudio.com/objects/tri-clamp-cups/): one end closed
- [Tri-clamp (Tri-Clover) sanitary ferrule, 1/2 to 4 inch](https://xemstudio.com/objects/tri-clamp-ferrule/): weld your own length

### Also needed
- [Spool hanger collars: clamp a 1.5, 2 or 3 in tri-clamp spool to 2020 extrusion](https://xemstudio.com/objects/spool-hanger-collars/): clamp it to 2020 for a vertical engine
- [Hollow loose-fit pistons for tri-clamp spools: Ø33.6, Ø46 and Ø70.9](https://xemstudio.com/objects/tri-clamp-hollow-pistons/): displacers sized to its bore
- [Full-bore pistons for tri-clamp spools: Ø34.8, Ø47.5 and Ø72.9](https://xemstudio.com/objects/tri-clamp-full-bore-pistons/): full-bore pistons and the clamp-on crank frame

## Questions

**What is the internal volume of a 2 inch tri clamp spool?**

About 17.7 cm³ per cm of length with 16 ga tube (47.5 mm bore): a 6 in spool is roughly 270 cm³, a 12 in spool 540 cm³ before the ferrule faces.

**What is the bore of a 1.5 inch tri clamp spool?**

34.8 mm (38.1 mm OD tube, 1.65 mm wall), about 9.5 cm³ per cm.

**How long is a tri clamp joint stack-up?**

Two ferrule faces plus one compressed gasket web, about 2.1 mm per joint (ISO 2852 V). A clamp adds roughly 10 mm of radial envelope beyond the flange.

## Fits with

- [Tri-clamp (Tri-Clover) sanitary ferrule, 1/2 to 4 inch](https://xemstudio.com/objects/tri-clamp-ferrule/)
- [Tri-clamp end cap, 6 mm flat: 1.5 and 2 in](https://xemstudio.com/objects/tri-clamp-end-cap/)
