2 in tri-clamp tee plugs with a rod bore and a Ø12 passage — dimension sheet Source: Xem Studio, https://xemstudio.com/objects/tri-clamp-tee-filler-plugs/ (sheet CC BY 4.0; files Xem Studio Design License, https://xemstudio.com/license/) Basis: Stock 2 in tee bore Ø47.5 (ASME BPE); passage size from the cycle model Catalog version: 2026-10-20 Sizes: see table below - A standard 2 in tee holds about 390 mL of gas. Two inserts fill it: a run plug (slid in from a run end) and a branch plug whose saddle-shaped bottom sits on it. What is left is a Ø12 passage from the hot spool's side up to the power cylinder, the displacer rod's Ø6.6 bore and a Ø4 hole to the gland cap's ports. - Gas left in the tee and its joints about 24.9 mL; Ø44 spigots reach through each gasket's lip to 0.5 mm from what they face. part size tee-run-plug-2in-rod6 Ø47.50 × 175.7, spigots Ø44 tee-branch-plug-2in Ø47.50 to 87.85, spigot Ø44 Files elsewhere (not hosted by Xem Studio; license as stated by the publisher): - ISO (via iTeh sample): ISO 2852 clamp liners: face profile and flange / groove diameters — PDF — standard excerpt; dimensions are facts — https://cdn.standards.iteh.ai/samples/7850/eb49c396488d408c8ced3e2961d76cf3/ISO-2852-1974.pdf - ASME: BPE Bioprocessing Equipment (clamp fitting dimensions, tube OD and wall) — standard — ASME; dimensions are facts [verify license at link] — https://www.asme.org/codes-standards/find-codes-standards/bpe-bioprocessing-equipment - Long Earth Society: Engine builds — web, video — LES site — https://longearthsociety.com/engineering/ Free files (Xem Studio Design License, Xem Studio; STEP + STL, 2 parts): https://xemstudio.com/files/hardware/tri-clamp-tee-filler-plugs/index.json API: https://xemstudio.com/api/geometry?object=tri-clamp-tee-filler-plugs