Library › Mechanisms › Cams ·

Two-roller cam yoke, roller pins 44 mm apart, 8 × 8 rods

What holds the rollers of a constant-diameter cam? · Modern device · basis: Xem Studio design following Brown's figure (1868); true size, no printing allowance

Also called: cam yoke, roller yoke, yugo de dos rodillos, Zweirollen-Kurvenrahmen

Exact dimensions. True size, with no tolerance added.

length
142.0 mm
width
18.0 mm
height
5.0 mm

Notes

  • 5 mm plate with two Ø3 holes 44 mm apart for the roller pins, a 28 × 10 slot clearing the Ø8 cam shaft over the whole stroke, and an 8 mm rod 40 long at each end; it sits 0.5 mm above the cam and the rollers hang under it on their pins.
  • Xem Studio design following Brown's figure; true size, no printing allowance (apply your own to the mating features).

Two-roller cam yoke, roller pins 44 mm apart, 8 × 8 rods size chart

dimensionvalue
roller pins2 × Ø3, 44 mm apart
shaft slot28 × 10
rods2 × 8 × 40
plate5 mm

Where the files are

Other publishers' files are linked, not hosted. "verify" = check the license at the link before commercial use.

Henry T. Brown (1868, public domain)Five Hundred and Seven Mechanical Movements — scan on archive.orgwebPublisher's page; dimensions are facts
507movements.comBrown's movement No. 117: figure, his text and an animationwebPublisher's page; dimensions are facts
Xem StudiodrawingwebPublisher's page; dimensions are facts

Free files

★ Free files 1 parts. Xem Studio design: free to use, print and sell things from; not to be republished as files. Xem Studio Design License. index.json

Use this part in your AI. Your AI gets the exact sizes and files straight from Xem and can design a mount, case or adapter around it. Direct downloads here are limited to one file every 10 minutes; through your AI they are unlimited.

Connect Xem to your AI (free, no account, about a minute)
https://xemstudio.com/mcp
  1. Claude: Add to Claude
  2. ChatGPT (Plus or higher): open Connectors → Advanced → turn on Developer mode → Create → paste the address, no authentication → Create.
  3. Cursor: install with one click. VS Code: install with one click.
Other apps and full steps
two-roller-cam-yoke-44yoke, pins at (±22, 0), plate z 4.5..9.5STEP · STL
Let your AI pull this. Add https://xemstudio.com/mcp to Claude, ChatGPT, Cursor or any MCP client (free, no account, one minute) and it can look up exact sizes, mating fits and free STEP/STL from every chat.
Set it up →

Plain text: sheet.txt · JSON: /api/geometry?object=two-roller-cam-yoke-44-rods-8

Two-roller cam yoke, roller pins 44 mm apart, 8 × 8 rods, isometric render of a generated part
Render of two-roller-cam-yoke-44 from the free STEP; not to scale.

Fits with

Questions

What holds the rollers of a constant-diameter cam?

5 mm plate with two Ø3 holes 44 mm apart for the roller pins, a 28 × 10 slot clearing the Ø8 cam shaft over the whole stroke, and an 8 mm rod 40 long at each end; it sits 0.5 mm above the cam and the rollers hang under it on their pins.