# V-wheel Ø23.89 × 10.23 for V-slot extrusion

> What are the dimensions of a V-slot V-wheel?

- Category: Hardware › Bearings, rails & motion
- Kind: Hardware
- Basis: OpenBuilds-size solid V-wheel: Ø23.89 × 10.23, 90° groove, two 625 bearings on a 1 mm spacer lip
- Page: https://xemstudio.com/objects/v-wheel/ · JSON: https://xemstudio.com/api/geometry?object=v-wheel · Plain text: https://xemstudio.com/objects/v-wheel/sheet.txt
- License: dimension sheet CC BY 4.0 (Xem Studio); files CC BY 4.0 or their publisher's license
- Use in every chat: add https://xemstudio.com/mcp as a connector (https://xemstudio.com/use-with-ai/)

**Exact dimensions.** Every file is drawn at true size with no tolerance added. The holes and pins that meet another part are listed below under Mating features, with the fit each joint needs; open those by your process's clearance before making the part.

## Notes

- A wheel Ø23.89 × 10.23 with a 90° V groove 3.2 deep around the middle; the groove rides the V of a 6 mm V-slot.
- A Ø16 bore (625 OD) runs through, with a 1 mm lip at mid-width (Ø11 hole) that separates the two 625 bearings.
- Axle: M5 through the two 625 bores.

## Mating features (exact size; open press / slide / run / socket by your process clearance, leave designed and clamp as drawn)

| feature | exact | mates with | fit | files |
|---|---|---|---|---|
| bearing pocket | Ø16 | two 625 bearings | press | vwheel-* |
| spacer lip | Ø11 × 1 | 625 outer races | designed | vwheel-* |
| V groove | 90°, 3.2 deep | V-slot extrusion | designed | vwheel-* |

## Sizes

| feature | value_mm |
|---|---|
| OD × width | 23.89 × 10.23 |
| groove | 90°, 3.2 deep |
| bore | Ø16 (two 625) |
| spacer lip | Ø11 hole × 1 |
| axle | M5 |

## Where the files are

- McMaster-Carr: [Mounted bearings (free STEP per part, for your own design use; no redistribution)](https://www.mcmaster.com/products/mounted-ball-bearings/) — STEP, PDF — McMaster-Carr site terms (verify at link)
- McMaster-Carr: [Sleeve bearings (free STEP per part, for your own design use; no redistribution)](https://www.mcmaster.com/products/sleeve-bearings/) — STEP, PDF — McMaster-Carr site terms (verify at link)
- OpenBuilds: [Solid V wheel kit](https://openbuildspartstore.com/solid-v-wheel-kit/) — web, STEP — OpenBuilds site (verify at link)
- Wikipedia: [Plain bearing](https://en.wikipedia.org/wiki/Plain_bearing) — web — CC BY-SA 4.0 (text)
- Long Earth Society: [Engine and rig builds](https://longearthsociety.com/engineering/) — web, video — LES site

## Free STEP/STL (1 parts, CC BY 4.0, Xem Studio)

Index: https://xemstudio.com/files/hardware/v-wheel/index.json

- vwheel-openbuilds-23-9: [STEP](https://xemstudio.com/files/hardware/bearing-housings-and-rod-supports/vwheel-openbuilds-23-9.step) · [STL](https://xemstudio.com/files/hardware/bearing-housings-and-rod-supports/vwheel-openbuilds-23-9.stl) — OpenBuilds-style V-wheel: Ø23.89 × 10.23, 90° V groove 3.2 deep, Ø16 pocket for two 625 bearings with a 1 mm spacer lip (Ø11)

## How it fits

### Connects to
- [Ball bearings, 683 to 6210 and flanged F6xx (ISO 15)](https://xemstudio.com/objects/ball-bearings-metric/): two 625 in the Ø16 bore

### Alternatives
- [MGN9C/H, MGN12C/H and MGN15H carriages](https://xemstudio.com/objects/mgn-carriages/): rail and carriage

## Questions

**What size is a V-slot V-wheel?**

23.89 mm OD, 10.23 mm wide, 90° groove 3.2 deep, two 625 (5 × 16 × 5) bearings either side of a 1 mm lip.

**What bearings go in a V-wheel?**

Two 625 bearings, Ø16 OD, on an M5 axle.

## Fits with

- [Ball bearings, 683 to 6210 and flanged F6xx (ISO 15)](https://xemstudio.com/objects/ball-bearings-metric/)
- [MGN9C/H, MGN12C/H and MGN15H carriages](https://xemstudio.com/objects/mgn-carriages/)
