Library › Mechanisms › Gears ·

Worm wheel (helical, non-throated), module 1.5, 30 teeth, helix 5.36° RH, for the 1-start Ø16 worm

What worm wheel runs with a 1-start, module 1.5 worm? · Modern device · basis: Xem Studio design following Brown's figure (1868); true size, no printing allowance

Also called: worm wheel, worm gear, helical worm wheel, non-throated worm wheel, rueda de tornillo sin fin (corona), Schneckenrad

Exact dimensions. True size, with no tolerance added.

length
47.99 mm
width
47.95 mm
height
10.0 mm

Notes

  • Involute helical gear used as a worm wheel: transverse module 1.5 (= the worm's axial module), 30 teeth, helix angle 5.36° right hand (= the worm's lead angle, same hand), normal module 1.49, normal pressure angle 20°; pitch Ø45, tip Ø47.99, root Ø41.27, face 10 mm, Ø8 bore. Centre distance with its worm 30.5 mm, axes crossed at 90°.
  • A non-throated worm wheel: worm and wheel are both involute helicoids, so the pair is a crossed-helical gear pair — exactly conjugate at every position, with point contact (a hobbed, throated wheel wraps round the worm and gives line contact; this plain helical form is the one used for light drives and for 3D-printed sets, and it needs no axial positioning).
  • Xem Studio design following Brown's figure; true size, no printing allowance (apply your own to the mating features).

Worm wheel (helical, non-throated), module 1.5, 30 teeth, helix… size chart

dimensionvalue
transverse module1.5
teeth30
helix5.36° RH
normal module1.49
pitch Ø45 mm
tip Ø47.99 mm
face10 mm
boreØ8
centre distance30.5 mm

Where the files are

Other publishers' files are linked, not hosted. "verify" = check the license at the link before commercial use.

Henry T. Brown (1868, public domain)Five Hundred and Seven Mechanical Movements — scan on archive.orgwebPublisher's page; dimensions are facts
507movements.comBrown's movement No. 31: figure, his text and an animationwebPublisher's page; dimensions are facts
Xem StudiodrawingwebPublisher's page; dimensions are facts

Free files

★ Free files 1 parts. Xem Studio design: free to use, print and sell things from; not to be republished as files. Xem Studio Design License. index.json

Use this part in your AI. Your AI gets the exact sizes and files straight from Xem and can design a mount, case or adapter around it. Direct downloads here are limited to one file every 10 minutes; through your AI they are unlimited.

Connect Xem to your AI (free, no account, about a minute)
https://xemstudio.com/mcp
  1. Claude: Add to Claude
  2. ChatGPT (Plus or higher): open Connectors → Advanced → turn on Developer mode → Create → paste the address, no authentication → Create.
  3. Cursor: install with one click. VS Code: install with one click.
Other apps and full steps
worm-wheel-helical-m1-5-30t-for-1start-d16wheel, axis Z, z 0..10, a tooth centred on +X at z = 0STEP · STL
Let your AI pull this. Add https://xemstudio.com/mcp to Claude, ChatGPT, Cursor or any MCP client (free, no account, one minute) and it can look up exact sizes, mating fits and free STEP/STL from every chat.
Set it up →

Plain text: sheet.txt · JSON: /api/geometry?object=worm-wheel-helical-m1-5-30t-for-1start-d16

Worm wheel (helical, non-throated), module 1.5, 30 teeth, helix 5.36° RH, for the 1-start Ø16 worm, isometric render of a generated part
Render of worm-wheel-helical-m1-5-30t-for-1start-d16 from the free STEP; not to scale.

Fits with

Questions

What worm wheel runs with a 1-start, module 1.5 worm?

Involute helical gear used as a worm wheel: transverse module 1.5 (= the worm's axial module), 30 teeth, helix angle 5.36° right hand (= the worm's lead angle, same hand), normal module 1.49, normal pressure angle 20°; pitch Ø45, tip Ø47.99, root Ø41.27, face 10 mm, Ø8 bore. Centre distance with its worm 30.5 mm, axes crossed at 90°.