Library › Computers & desk › Storage & NAS ·

2.5-inch drive (SATA SSD / HDD)

What are the dimensions and screw positions of a 2.5-inch drive? · Standard part · basis: SFF-8201 form factor

Also called: 2.5 ssd, 2.5 inch hdd, sata ssd

Exact dimensions. Every file is drawn at true size with no tolerance added. The holes and pins that meet another part are listed below under Mating features, with the fit each joint needs; open those by your process's clearance before making the part. Mating features

length
100.2 mm
width
69.85 mm
height
7.0 mm
holes
8 × Ø3.0 mm · bottom 76.60 × 61.72; side 76.60 at 3.00 high (from the connector end: 14.00, 90.60) · M3

Notes

  • 100.20 × 69.85 mm (SFF-8201 nominal length; 100.45 max, width ±0.25); 7 mm thick for most SSDs, 9.5 mm for laptop HDDs, 15 mm for some older and enterprise drives (the spec also lists 5, 8.47, 10.5, 12.7, 17 and 19.05).
  • Mounting holes, measured from the connector-end face: 2 × M3 on each side at 14.00 and 90.60 mm, 3.00 mm above the bottom face; 4 × M3 on the bottom at 14.00 and 90.60 mm, 4.07 mm in from each long edge (61.72 mm apart). Side screws may go 2.0 mm deep on drives up to 7 mm thick and 3.0 mm on thicker ones; bottom screws 2.5 mm.
  • Bottom holes are optional on drives 7 mm thick or less (some SSDs omit them); the side holes are mandatory.
  • Files: true-size solid drives (7, 9.5 and 15 mm) with every hole as a plain Ø3.0 cylinder at the thread depth; the SATA connector is not modelled. No printing allowance.

Mating features

Drawn at the exact size. Open press, slide, run and socket features by your process's clearance (tolerances by process); leave designed gaps and clamp fits as drawn.

featureexactmates withfitfiles
side mounting holes2 × M3 per side at 14.00 and 90.60 from the connector end, 3.00 above the bottom face; thread depth 2.0 (≤7 mm drives) / 3.0M3 screws; mandatory (SFF-8201)designedall
bottom mounting holes4 × M3 at 14.00 and 90.60, 4.07 from each long edge (61.72 apart); depth 2.5M3 screws; optional on drives ≤7 mm thickdesignedall
drive body100.20 × 69.85 (100.45 max, width ±0.25); thickness 7 / 9.5 / 15bay or cage; SATA connector on the short edgeslideall

Where the files are

Other publishers' files are linked, not hosted. "verify" = check the license at the link before commercial use.

SNIA SFFSFF-8201 Rev 3.4, 2.5" Form Factor Drive Dimensions (Fig 3-1, 3-3)PDFSNIA public spec; dimensions are facts
SeagateBarraCuda 2.5 Product Manual 100807728 Rev B, Fig 4–5 mounting dimensionsPDFPublisher's page; dimensions are facts

Free files

★ Free files 3 parts. Generated by Xem Studio from the standard; threads are plain cylinders at major diameter. CC BY 4.0. index.json

Use this part in your AI. Your AI gets the exact sizes and files straight from Xem and can design a mount, case or adapter around it. Direct downloads here are limited to one file every 10 minutes; through your AI they are unlimited.

Connect Xem to your AI (free, no account, about a minute)
https://xemstudio.com/mcp
  1. Claude: Add to Claude
  2. ChatGPT (Plus or higher): open Connectors → Advanced → turn on Developer mode → Create → paste the address, no authentication → Create.
  3. Cursor: install with one click. VS Code: install with one click.
Other apps and full steps
drive-2-5in-7-0mm2.5 in drive 7.0 mm thick: 100.2 × 69.85 mm, 4 × M3 bottom + 2 × M3 each side at 14.00 / 90.60 mm from the connector end (bottom holes are optional on drives 7 mm and thinner)STEP · STL
drive-2-5in-9-5mm2.5 in drive 9.5 mm thick: 100.2 × 69.85 mm, 4 × M3 bottom + 2 × M3 each side at 14.00 / 90.60 mm from the connector endSTEP · STL
drive-2-5in-15-0mm2.5 in drive 15.0 mm thick: 100.2 × 69.85 mm, 4 × M3 bottom + 2 × M3 each side at 14.00 / 90.60 mm from the connector endSTEP · STL
Let your AI pull this. Add https://xemstudio.com/mcp to Claude, ChatGPT, Cursor or any MCP client (free, no account, one minute) and it can look up exact sizes, mating fits and free STEP/STL from every chat.
Set it up →

Plain text: sheet.txt · JSON: /api/geometry?object=2-5-inch-drive

2.5-inch drive (SATA SSD / HDD), isometric render of a generated part
Render of drive-2-5in-7-0mm from the free STEP; not to scale.

Fits with

Questions

What are 2.5 inch SSD dimensions?

100 × 69.85 mm, 7 mm thick for most SSDs (9.5 mm laptop HDDs, 15 mm some older drives).

What are the 2.5 inch drive mounting hole positions?

Four M3 on the bottom on a 76.6 × 61.72 mm pattern, plus two M3 per side; SATA connector on one short edge.