Library › Electronic components › Switches, relays & indicators ·

Speakers, amplifiers and microphones: 3 in, 40 mm, enclosed, STEMMA speaker, MAX98357, I2S/PDM mics

What are the dimensions of the Adafruit 3 inch speaker and 40 mm speaker? · Modern device · basis: Adafruit CAD (MIT) models; speaker frames measured from the models

Also called: 3 inch speaker dimensions, 40mm speaker size, max98357 dimensions, stemma speaker, i2s mic breakout size, speaker grille design

Exact dimensions. Every file is drawn at true size with no tolerance added. The holes and pins that meet another part are listed below under Mating features, with the fit each joint needs; open those by your process's clearance before making the part. Mating features

sizes
17 in table

Notes

  • 3 in 8 Ω speaker (1313): Ø78 mm frame, 4 × Ø4 mm holes on 68 mm, 36 mm deep with the magnet. 40 mm speaker (3968): Ø40 × 5 mm. Enclosed 3 W speaker (3351): 60 × 45 × 15 mm with a JST PH plug. Mini oval (3923): 20 × 30 × 5 mm.
  • STEMMA speaker (3885): 40 × 25 mm board with a Ø25 mm speaker. Amps: MAX98357 I2S (3006) 18 × 22 mm; PAM8302 (2130) 18 × 18 mm. I2S MEMS mic (6049) and PDM mic (4346) 15 × 18 mm with a Ø1 mm port hole.
  • Grille: hole area at least 30% of the cone area; a 1 mm gasket ring behind the frame stops buzz.

Speakers, amplifiers and microphones: 3 in, 40 mm, enclosed, STEMMA… size chart

productbbox l (mm)bbox w (mm)bbox h (mm)
1313 Speaker 3in 8Ohm 1W77.877.826.0
3351 Enclosed Speaker 3W 4Ohm70.030.019.7
3923 Mini Oval Speaker32.519.96.5
3968 Speaker 40mm40.040.025.0
3885 STEMMA Speaker36.830.56.6
3006 MAX9835719.117.82.6
2130 PAM830224.115.23.1
6049 I2S MEMS Microphone16.512.72.6
4346 PDM Mic Breakout14.014.04.5
2133 Audio FX Soundboard with Headphone49.622.96.0
3436 Adafruit Music Maker Amp Feather Wing51.822.912.6
3692 TRS Jack27.69.28.0
5954 TRRS Trinkey41.915.27.7
987 MAX98306 Stereo Amp27.924.112.1
1752 MAX974455.343.610.6
6513 MAX98357 Stereo Amp25.419.111.9
6421 PCM5122 I2S DAC37.622.96.4

Mating features

Drawn at the exact size. Open press, slide, run and socket features by your process's clearance (tolerances by process); leave designed gaps and clamp fits as drawn.

featureexactmates withfitfiles
3 in 8 Ω speaker (1313)Ø78 frame, 4 × Ø4 holes on 68, 36 deep with magnetM4 screws on the 68 mm circledesigned1313*
I2S / PDM MEMS mic (6049, 4346)15 × 18, port hole Ø1case sound hole at the Ø1 portdesignedall

Where the files are

Other publishers' files are linked, not hosted. "verify" = check the license at the link before commercial use.

Adafruit (official)Adafruit_CAD_Parts: STEP, Fusion 360 and STL for Adafruit productsSTEP, F3D, STLMIT

Free files

★ Free files 17 parts. Direct links to Adafruit Industries's own repository; nothing rehosted. MIT License (Adafruit_CAD_Parts). index.json

Use this part in your AI. Your AI gets the exact sizes and files straight from Xem and can design a mount, case or adapter around it. Direct downloads here are limited to one file every 10 minutes; through your AI they are unlimited.

Connect Xem to your AI (free, no account, about a minute)
https://xemstudio.com/mcp
  1. Claude: Add to Claude
  2. ChatGPT (Plus or higher): open Connectors → Advanced → turn on Developer mode → Create → paste the address, no authentication → Create.
  3. Cursor: install with one click. VS Code: install with one click.
Other apps and full steps
1313-speaker-3in-8ohm-1wAdafruit #1313 Speaker 3in 8Ohm 1W; bbox 77.8 × 77.8 × 26.0 mm; 0.3 MB on GitHubSTEP
3351-enclosed-speaker-3w-4ohmAdafruit #3351 Enclosed Speaker 3W 4Ohm; bbox 70.0 × 30.0 × 19.7 mm; 0.2 MB on GitHubSTEP
3923-mini-oval-speakerAdafruit #3923 Mini Oval Speaker; bbox 32.5 × 19.9 × 6.5 mm; 0.1 MB on GitHubSTEP · STL
3968-speaker-40mmAdafruit #3968 Speaker 40mm; bbox 40.0 × 40.0 × 25.0 mm; 0.1 MB on GitHubSTEP · STL
3885-stemma-speakerAdafruit #3885 STEMMA Speaker; bbox 36.8 × 30.5 × 6.6 mm; 1.0 MB on GitHubSTEP · STL
3006-max98357Adafruit #3006 MAX98357; bbox 19.1 × 17.8 × 2.6 mm; 0.3 MB on GitHubSTEP · STL
2130-pam8302Adafruit #2130 PAM8302; bbox 24.1 × 15.2 × 3.1 mm; 0.1 MB on GitHubSTEP · STL
6049-i2s-mems-microphoneAdafruit #6049 I2S MEMS Microphone; bbox 16.5 × 12.7 × 2.6 mm; 2.0 MB on GitHubSTEP
4346-pdm-mic-breakoutAdafruit #4346 PDM Mic Breakout; bbox 14.0 × 14.0 × 4.5 mm; 0.3 MB on GitHubSTEP · STL
2133-audio-fx-soundboard-with-headphoneAdafruit #2133 Audio FX Soundboard with Headphone; bbox 49.6 × 22.9 × 6.0 mm; 3.0 MB on GitHubSTEP · STL
3436-adafruit-music-maker-amp-feather-wingAdafruit #3436 Adafruit Music Maker Amp Feather Wing; bbox 51.8 × 22.9 × 12.6 mm; 0.2 MB on GitHubSTEP
3692-trs-jackAdafruit #3692 TRS Jack; bbox 27.6 × 9.2 × 8.0 mm; 0.2 MB on GitHubSTEP
5954-trrs-trinkeyAdafruit #5954 TRRS Trinkey; bbox 41.9 × 15.2 × 7.7 mm; 2.9 MB on GitHubSTEP · STL
987-max98306-stereo-ampAdafruit #987 MAX98306 Stereo Amp; bbox 27.9 × 24.1 × 12.1 mm; 0.6 MB on GitHubSTEP · STL
1752-max9744Adafruit #1752 MAX9744; bbox 55.3 × 43.6 × 10.6 mm; 0.0 MB on GitHubSTEP
6513-max98357-stereo-ampAdafruit #6513 MAX98357 Stereo Amp; bbox 25.4 × 19.1 × 11.9 mm; 5.7 MB on GitHubSTEP
6421-pcm5122-i2s-dacAdafruit #6421 PCM5122 I2S DAC; bbox 37.6 × 22.9 × 6.4 mm; 2.1 MB on GitHubSTEP
Let your AI pull this. Add https://xemstudio.com/mcp to Claude, ChatGPT, Cursor or any MCP client (free, no account, one minute) and it can look up exact sizes, mating fits and free STEP/STL from every chat.
Set it up →

Plain text: sheet.txt · JSON: /api/geometry?object=adafruit-audio-speakers-mics

Speakers, amplifiers and microphones: 3 in, 40 mm, enclosed, STEMMA speaker, MAX98357, I2S/PDM mics, isometric render of a generated part
Render of 4346-pdm-mic-breakout from the free STEP; not to scale.

Fits with

Questions

What are the Adafruit 3 inch speaker dimensions?

Ø78 mm frame, mounting holes Ø4 on a 68 mm pattern, 36 mm deep including the magnet; 8 Ω 1 W.

What size is the 40 mm speaker?

Ø40 mm, 5 mm thick, 4 Ω 3 W, bare wire leads; needs a Ø38 mm opening or grille.