Library › Electronic components › Switches, relays & indicators ·
Buzzers and beepers: 12 mm, 15 mm magnetic; TDK PS1240 piezo
What are the dimensions of a 12 mm buzzer? · Standard part · basis: KiCad 3D models of common PCB buzzers (12 × 9.5 mm and 15 × 7.5 mm magnetic with 7.6 mm pin spacing; TDK PS1240 12 mm piezo; CUI CST-931)
Also called: 12mm buzzer dimensions, buzzer pin spacing, ps1240, magnetic buzzer size, active buzzer
Exact dimensions. Every file is drawn at true size with no tolerance added. The holes and pins that meet another part are listed below under Mating features, with the fit each joint needs; open those by your process's clearance before making the part. Mating features
- sizes
- 7 in table
Notes
- 12 mm magnetic buzzer (the black cylinder on Arduino kits): Ø12 × 9.5 mm, pins 7.6 mm apart, sound hole on top; needs a Ø3–4 mm hole in the case within 2 mm of the port.
- 15 mm: Ø15 × 7.5 mm, same 7.6 mm pitch. TDK PS1240 piezo: Ø12.2 × 6.5 mm, 5 mm pitch; passive, drive with a square wave.
- A printed resonant chamber (Ø12 cavity 3 mm deep over the port, exiting through a Ø2.5 hole) makes a 12 mm buzzer noticeably louder.
Buzzers and beepers: 12 mm, 15 mm magnetic; TDK PS1240 piezo size chart
| part | bbox l (mm) | bbox w (mm) | bbox h (mm) |
|---|---|---|---|
| 12x9.5rm7.6 | 12.5 | 12.0 | 12.0 |
| 15x7.5rm7.6 | 15.0 | 15.0 | 10.5 |
| mallory-ast1109mltrq | 15.0 | 9.0 | 2.0 |
| tdk-ps1240p02bt | 21.5 | 12.0 | 12.0 |
| cui-cst-931rp-a | 10.8 | 9.0 | 9.0 |
| kingstate-kcg0601 | 6.8 | 6.6 | 6.6 |
| prosignal-abt-410-rc | 12.0 | 12.0 | 11.5 |
Mating features
Drawn at the exact size. Open press, slide, run and socket features by your process's clearance (tolerances by process); leave designed gaps and clamp fits as drawn.
| feature | exact | mates with | fit | files |
|---|---|---|---|---|
| 12 mm magnetic buzzer | Ø12 × 9.5, pins 7.6 apart, sound port on top | PCB holes on 7.6 pitch; case sound hole Ø3–4 within 2 of the port | designed | 12x9.5* |
| 15 mm buzzer | Ø15 × 7.5, pins 7.6 apart | PCB holes on 7.6 pitch | designed | 15x7.5* |
| TDK PS1240 piezo | Ø12.2 × 6.5, pins 5 apart | PCB holes on 5 mm pitch (passive: square-wave drive) | designed | tdk-ps1240* |
Where the files are
Files below are rehosted from this library under its share-alike license, with its license and credits beside them. "verify" = check the license at the link before commercial use.
| KiCad | kicad-packages3D library (origin of these files) | STEP, WRL | CC BY-SA 4.0 with KiCad exception |
Free files
★ Free files 7 parts. From the KiCad library contributors, rehosted with their license and credits. CC BY-SA 4.0 (KiCad library license, with the KiCad exception). index.json
Use this part in your AI. Your AI gets the exact sizes and files straight from Xem and can design a mount, case or adapter around it. Direct downloads here are limited to one file every 10 minutes; through your AI they are unlimited.
Connect Xem to your AI (free, no account, about a minute)
https://xemstudio.com/mcp- Claude: Add to Claude
- ChatGPT (Plus or higher): open Connectors → Advanced → turn on Developer mode → Create → paste the address, no authentication → Create.
- Cursor: install with one click. VS Code: install with one click.
| 12x9.5rm7.6 | KiCad Buzzer_Beeper: Buzzer_12x9.5RM7.6; bbox 12.5 × 12.0 × 12.0 mm | STEP · STL |
| 15x7.5rm7.6 | KiCad Buzzer_Beeper: Buzzer_15x7.5RM7.6; bbox 15.0 × 15.0 × 10.5 mm | STEP · STL |
| mallory-ast1109mltrq | KiCad Buzzer_Beeper: Buzzer_Mallory_AST1109MLTRQ; bbox 15.0 × 9.0 × 2.0 mm | STEP · STL |
| tdk-ps1240p02bt | KiCad Buzzer_Beeper: Buzzer_TDK_PS1240P02BT; bbox 21.5 × 12.0 × 12.0 mm | STEP · STL |
| cui-cst-931rp-a | KiCad Buzzer_Beeper: MagneticBuzzer_CUI_CST-931RP-A; bbox 10.8 × 9.0 × 9.0 mm | STEP · STL |
| kingstate-kcg0601 | KiCad Buzzer_Beeper: MagneticBuzzer_Kingstate_KCG0601; bbox 6.8 × 6.6 × 6.6 mm | STEP · STL |
| prosignal-abt-410-rc | KiCad Buzzer_Beeper: MagneticBuzzer_ProSignal_ABT-410-RC; bbox 12.0 × 12.0 × 11.5 mm | STEP · STL |
https://xemstudio.com/mcp to Claude, ChatGPT, Cursor or any MCP client (free, no account, one minute) and it can look up exact sizes, mating fits and free STEP/STL from every chat.Plain text: sheet.txt · JSON: /api/geometry?object=buzzers-tht

Fits with
Questions
What is the pin spacing of a 12 mm buzzer?
7.6 mm (0.3 in). The 15 mm buzzers use the same 7.6 mm spacing; the TDK PS1240 piezo uses 5 mm.
How tall is a 12 mm buzzer?
9.5 mm for the common 12 × 9.5 magnetic buzzer; 6.5 mm for the PS1240 piezo.


