Library › Electronic components › Microcontroller boards · 2016 ·

Adafruit Feather (standard form factor)

What is the Adafruit Feather form factor: board size and mounting holes? · Modern device · basis: Adafruit Feather M0 Basic Proto rev C board file (outline and holes); numbers re-keyed, geometry built by Xem Studio

Also called: feather, feather board

Exact dimensions. True size, with no tolerance added.

length
50.8 mm
width
22.86 mm
holes
4 × Ø2.5 mm · 45.72 x 17.78 · M2.5

Notes

  • From Adafruit's Feather M0 Basic Proto board file, the original Feather: 50.8 × 22.86 mm with 0.1 in (2.54 mm) corner radii and four holes on 45.72 × 17.78 mm. Every Feather shares the outline and hole centres; hole size at the far end and the USB edge recess vary by board.
  • Sizes are exact nominal millimetres, true size: add your own clearance.
  • All Feathers share the outline and holes; component height varies by board.
  • Adafruit publishes CAD for most boards in one repository.

Adafruit Feather size chart

parametervalue
board50.8 × 22.86 mm (2.0 × 0.9 in), corner radius 2.54 mm (0.1 in)
USB-end edge recess (M0 Basic)0.508 mm deep between y 8.89 and 13.97 (45° ends); USB-C Feathers may differ
hole 1Ø2.5 at (2.54, 2.54) mm
hole 2Ø2.5 at (2.54, 20.32) mm
hole 3Ø2.54 at (48.26, 2.54) mm
hole 4Ø2.54 at (48.26, 20.32) mm
hole pattern45.72 × 17.78 mm (1.8 × 0.7 in); far-end hole size varies by board (2.2 mm on the ESP32-S3)

Where the files are

Other publishers' files are linked, not hosted. "verify" = check the license at the link before commercial use.

Adafruit (official)Adafruit CAD partsSTEP, STL, F3Dsee repository verify
Adafruit (official)Feather specificationPDF, webCC BY-SA 3.0 (Adafruit Learn) verify
Adafruit (official)Feather M0 Basic Proto rev C board file (Feather form factor)EAGLECC BY-SA 3.0 (Adafruit PCB files); numbers re-keyed, files not hosted

Free files

★ Free files 1 parts. Generated by Xem Studio from the standard; threads are plain cylinders at major diameter. CC BY 4.0. index.json

Use this part in your AI. Your AI gets the exact sizes and files straight from Xem and can design a mount, case or adapter around it. Direct downloads here are limited to one file every 10 minutes; through your AI they are unlimited.

Connect Xem to your AI (free, no account, about a minute)
https://xemstudio.com/mcp
  1. Claude: Add to Claude
  2. ChatGPT (Plus or higher): open Connectors → Advanced → turn on Developer mode → Create → paste the address, no authentication → Create.
  3. Cursor: install with one click. VS Code: install with one click.
Other apps and full steps
adafruit-feather-m0-basic-boardFeather outline 50.8 × 22.86 mm with 2.54 mm corner radii, from Adafruit's Feather M0 Basic Proto board file (incl. its 0.508 mm micro-USB edge recess); holes Ø2.5 at the USB end, Ø2.54 at the far end; board drawn 1.6 mm thick: the maker does not print the thicknessSTEP · STL
Let your AI pull this. Add https://xemstudio.com/mcp to Claude, ChatGPT, Cursor or any MCP client (free, no account, one minute) and it can look up exact sizes, mating fits and free STEP/STL from every chat.
Set it up →

Plain text: sheet.txt · JSON: /api/geometry?object=adafruit-feather

Adafruit Feather (standard form factor), isometric render of a generated part
Render of adafruit-feather-m0-basic-board from the free STEP; not to scale.

Fits with

Questions

What are the Adafruit Feather (standard form factor) dimensions in mm?

50.8 × 22.86 mm (length × width × height). All Feathers share the outline and holes; component height varies by board.

What is the Adafruit Feather (standard form factor) mounting hole pattern?

4 × Ø2.5 mm on a 45.72 x 17.78 mm pattern, M2.5 screws.

Where is the official CAD for the Adafruit Feather (standard form factor)?

Adafruit (official): Adafruit CAD parts (STEP, STL, F3D, see repository). Linked from the sheet; Xem Studio does not rehost it.