Library › Electronic components › Microcontroller boards · 2010 ·

Arduino Uno R3

What are the Arduino Uno board dimensions and mounting holes? · Modern device · basis: Arduino UNO R3 board file (Dimension layer) and datasheet mounting-hole drawing; numbers re-keyed, geometry built by Xem Studio

Also called: uno, arduino uno, arduino uno r3 dimensions mm, arduino uno medidas, arduino uno dimensões

Exact dimensions. True size, with no tolerance added.

length
68.6 mm
width
53.4 mm
holes
4 × Ø3.2 mm · see official outline; holes are not on a rectangular grid · M3

Notes

  • From Arduino's own UNO R3 board file and datasheet drawing: the board file is the true outline (the stepped shield edge and 1 mm corner radii) with the four Ø3.2 mounting holes, which are not on a rectangle. Origin is the bottom-left corner at the USB/jack edge.
  • Sizes are exact nominal millimetres, true size: add your own clearance.
  • USB-B and DC barrel jack on the same short edge.
  • Shield header spacing is the Uno standard (one 0.16 in offset).

Arduino Uno R3 size chart

parametervalue
board68.58 × 53.34 mm (2.7 × 2.1 in); USB-B and DC jack edge at x = 0
cornersR1.0 on the three square corners; the far edge steps out 2.54 mm between y 5.08 and 37.85 (45° chamfers)
hole 1Ø3.2 at (13.97, 2.54) mm
hole 2Ø3.2 at (15.24, 50.8) mm
hole 3Ø3.2 at (66.04, 7.62) mm
hole 4Ø3.2 at (66.04, 35.56) mm
hole spacing (datasheet)66.04 mm (2600 mil) bottom pair; 45.72 mm (1800 mil) and 17.78 mm (700 mil) on the far edge; top hole 15.24 mm in, 2.54 mm down

Where the files are

Other publishers' files are linked, not hosted. "verify" = check the license at the link before commercial use.

Arduino (official)UNO R3 documentation, CAD filesSTEP, DXF, PDFsee page verify
Arduino (official)UNO R3 design files (UNO-TH_Rev3e board) and datasheet mounting-hole drawingEAGLE, PNGCC BY-SA 4.0 (Arduino design files); numbers re-keyed, files not hosted

Free files

★ Free files 1 parts. Generated by Xem Studio from the standard; threads are plain cylinders at major diameter. CC BY 4.0. index.json

Use this part in your AI. Your AI gets the exact sizes and files straight from Xem and can design a mount, case or adapter around it. Direct downloads here are limited to one file every 10 minutes; through your AI they are unlimited.

Connect Xem to your AI (free, no account, about a minute)
https://xemstudio.com/mcp
  1. Claude: Add to Claude
  2. ChatGPT (Plus or higher): open Connectors → Advanced → turn on Developer mode → Create → paste the address, no authentication → Create.
  3. Cursor: install with one click. VS Code: install with one click.
Other apps and full steps
arduino-uno-r3-boardUNO R3 board outline from Arduino's board file (the stepped shield edge, 1.0 mm corner radii) with the four Ø3.2 holes at their published positions; board drawn 1.6 mm thick: the maker does not print the thicknessSTEP · STL
Let your AI pull this. Add https://xemstudio.com/mcp to Claude, ChatGPT, Cursor or any MCP client (free, no account, one minute) and it can look up exact sizes, mating fits and free STEP/STL from every chat.
Set it up →

Plain text: sheet.txt · JSON: /api/geometry?object=arduino-uno-r3

Arduino Uno R3, isometric render of a generated part
Render of arduino-uno-r3-board from the free STEP; not to scale.

Fits with

Questions

What are the Arduino Uno R3 dimensions in mm?

68.6 × 53.4 mm (length × width × height). USB-B and DC barrel jack on the same short edge.

What is the Arduino Uno R3 mounting hole pattern?

4 × Ø3.2 mm on a see official outline; holes are not on a rectangular grid mm pattern, M3 screws.

Where is the official CAD for the Arduino Uno R3?

Arduino (official): UNO R3 documentation, CAD files (STEP, DXF, PDF, see page). Linked from the sheet; Xem Studio does not rehost it.