Library › Electronic components › Fans ·

Axial fans, 25 to 140 mm: frames and hole patterns

What is the screw hole spacing for 80 mm, 92 mm and 140 mm fans? · Hardware · basis: Industry-standard square axial fan frames (hole pattern = frame − 8 mm for 40 mm and larger except 140, which uses 124.5)

Also called: 80mm fan, 92mm fan, 140mm fan, 60mm fan, 30mm fan, fan screw spacing, fan hole pattern, computer fan sizes, 40mm fan dimensions, ventilador 40mm medidas, ventoinha 40mm dimensões

Exact dimensions. Every file is drawn at true size with no tolerance added. The holes and pins that meet another part are listed below under Mating features, with the fit each joint needs; open those by your process's clearance before making the part. Mating features

sizes
10 in table

Notes

  • Hole patterns: 25→20, 30→24, 40→32, 50→40, 60→50, 70→61.5, 80→71.5, 92→82.5, 120→105, 140→124.5 mm. Holes Ø4.3 from 50 mm up, Ø3.5 (M3) for 40 and Ø2.9 (M2.5) for 25/30.
  • Thickness: 10 mm for 25–40, 15 for 50–70, 25 for 80–140 (15 mm slim 120s exist; 4020 is a 20 mm 40). Airflow arrows are moulded on the frame side.
  • The files are the exact frame envelope (outer size, hole pattern, holes) with a solid hub, so a grille or duct can be checked against it; a duct that wraps the frame takes the frame size exactly (see Mating features).

Axial fans, 25 to 140 mm: frames and hole patterns size chart

frame (mm)hole pattern (mm)hole dia (mm)thickness (mm)
25202.910
30242.910
40323.510
50404.315
60504.315
7061.54.315
8071.54.325
9282.54.325
1201054.325
140124.54.325

Mating features

Drawn at the exact size. Open press, slide, run and socket features by your process's clearance (tolerances by process); leave designed gaps and clamp fits as drawn.

featureexactmates withfitfiles
framesize × size × tduct or grille pocketslidefan-*
holesØ2.9 / 3.5 / 4.3fan screwsdesignedfan-*

Where the files are

Other publishers' files are linked, not hosted. "verify" = check the license at the link before commercial use.

WikipediaComputer fanwebCC BY-SA 4.0 (text)
McMaster-CarrEquipment-cooling fans (free STEP/IGES/STL per part, for your own design use; no redistribution)STEP, IGES, STL, PDFMcMaster-Carr site terms: personal design use, no redistribution verify

Free files

★ Free files 12 parts. Generated by Xem Studio from the standard; threads are plain cylinders at major diameter. CC BY 4.0. index.json

Use this part in your AI. Your AI gets the exact sizes and files straight from Xem and can design a mount, case or adapter around it. Direct downloads here are limited to one file every 10 minutes; through your AI they are unlimited.

Connect Xem to your AI (free, no account, about a minute)
https://xemstudio.com/mcp
  1. Claude: Add to Claude
  2. ChatGPT (Plus or higher): open Connectors → Advanced → turn on Developer mode → Create → paste the address, no authentication → Create.
  3. Cursor: install with one click. VS Code: install with one click.
Other apps and full steps
fan-25x1025 mm frame, 20 mm hole pattern, Ø2.9 holes, 10 thickSTEP · STL
fan-30x1030 mm frame, 24 mm hole pattern, Ø2.9 holes, 10 thickSTEP · STL
fan-40x1040 mm frame, 32 mm hole pattern, Ø3.5 holes, 10 thickSTEP · STL
fan-50x1550 mm frame, 40 mm hole pattern, Ø4.3 holes, 15 thickSTEP · STL
fan-60x1560 mm frame, 50 mm hole pattern, Ø4.3 holes, 15 thickSTEP · STL
fan-70x1570 mm frame, 61.5 mm hole pattern, Ø4.3 holes, 15 thickSTEP · STL
fan-80x2580 mm frame, 71.5 mm hole pattern, Ø4.3 holes, 25 thickSTEP · STL
fan-92x2592 mm frame, 82.5 mm hole pattern, Ø4.3 holes, 25 thickSTEP · STL
fan-120x25120 mm frame, 105 mm hole pattern, Ø4.3 holes, 25 thickSTEP · STL
fan-140x25140 mm frame, 124.5 mm hole pattern, Ø4.3 holes, 25 thickSTEP · STL
fan-40x2040 × 40 × 20 (4020)STEP · STL
fan-120x15120 × 120 × 15 slimSTEP · STL
Let your AI pull this. Add https://xemstudio.com/mcp to Claude, ChatGPT, Cursor or any MCP client (free, no account, one minute) and it can look up exact sizes, mating fits and free STEP/STL from every chat.
Set it up →

Plain text: sheet.txt · JSON: /api/geometry?object=axial-fan-frames

Axial fans, 25 to 140 mm: frames and hole patterns, isometric render of a generated part
Render of fan-80x25 from the free STEP; not to scale.

Fits with

Questions

What is the 80 mm fan screw spacing?

71.5 × 71.5 mm, Ø4.3 holes, 25 mm thick standard.

What is the 140 mm fan hole spacing?

124.5 × 124.5 mm (some 140s also carry the 120 mm 105 × 105 pattern). Ø4.3 holes, 25 mm thick.

What is the 30 mm fan hole spacing?

24 × 24 mm, Ø2.9 holes (M2.5); 25 mm fans use 20 × 20. Both 10 mm thick (3010, 2510).

What is the 60 mm fan hole spacing?

50 × 50 mm, Ø4.3 holes; 15 or 25 mm thick.