Library › Tri-clamp & pipe › Pipe, tube & threads ·
Hobby brass tube (K&S), 1/16–21/32 in and 1–12 mm, telescoping
What sizes of K&S brass tube telescope into each other? · Hardware · basis: K&S Precision Metals round brass tube: imperial sizes in 1/32 in OD steps with .014 in (0.36 mm) wall; metric 1–12 mm OD with 0.45 mm wall
Also called: k&s brass tube sizes, telescoping brass tube, brass tubing chart, 1/8 brass tube od, hobby brass tube, brass tube 6mm
Long Earth Society build part. Displacer rods, push-rods and regenerator tubes on the LES engines. Long Earth Society
Exact dimensions. Every file is drawn at true size with no tolerance added. The holes and pins that meet another part are listed below under Mating features, with the fit each joint needs; open those by your process's clearance before making the part. Mating features
- sizes
- 32 in table
Notes
- Imperial series telescopes: each size slides inside the next 1/32 in larger (OD 1/8 → ID of 5/32 is 0.128 in). Metric series telescopes in 1 mm steps (0.45 wall leaves 0.1 mm clearance).
- Also sold in aluminium (.014 wall, softer) and stainless (.010–.014). Cut with a tube cutter, deburr inside or the telescope jams.
- Why it's here: displacer rods and push-rods (3/32 and 1/8 in), displacer bodies (telescoping 1/2 → 17/32 for a close-fit sleeve), regenerator tubes, and thermocouple sheaths on the LES engines.
Hobby brass tube (K&S), 1/16–21/32 in and 1–12 mm, telescoping size chart
| size | od (mm) | wall (mm) | id (mm) |
|---|---|---|---|
| 2/32 in | 1.59 | 0.36 | 0.88 |
| 3/32 in | 2.38 | 0.36 | 1.67 |
| 4/32 in | 3.17 | 0.36 | 2.46 |
| 5/32 in | 3.97 | 0.36 | 3.26 |
| 6/32 in | 4.76 | 0.36 | 4.05 |
| 7/32 in | 5.56 | 0.36 | 4.85 |
| 8/32 in | 6.35 | 0.36 | 5.64 |
| 9/32 in | 7.14 | 0.36 | 6.43 |
| 10/32 in | 7.94 | 0.36 | 7.23 |
| 11/32 in | 8.73 | 0.36 | 8.02 |
| 12/32 in | 9.52 | 0.36 | 8.81 |
| 13/32 in | 10.32 | 0.36 | 9.61 |
| 14/32 in | 11.11 | 0.36 | 10.4 |
| 15/32 in | 11.91 | 0.36 | 11.2 |
| 16/32 in | 12.7 | 0.36 | 11.99 |
| 17/32 in | 13.49 | 0.36 | 12.78 |
| 18/32 in | 14.29 | 0.36 | 13.58 |
| 19/32 in | 15.08 | 0.36 | 14.37 |
| 20/32 in | 15.88 | 0.36 | 15.16 |
| 21/32 in | 16.67 | 0.36 | 15.96 |
| 1 mm | 1 | 0.45 | 0.1 |
| 2 mm | 2 | 0.45 | 1.1 |
| 3 mm | 3 | 0.45 | 2.1 |
| 4 mm | 4 | 0.45 | 3.1 |
| 5 mm | 5 | 0.45 | 4.1 |
| 6 mm | 6 | 0.45 | 5.1 |
| 7 mm | 7 | 0.45 | 6.1 |
| 8 mm | 8 | 0.45 | 7.1 |
| 9 mm | 9 | 0.45 | 8.1 |
| 10 mm | 10 | 0.45 | 9.1 |
| 11 mm | 11 | 0.45 | 10.1 |
| 12 mm | 12 | 0.45 | 11.1 |
Mating features
Drawn at the exact size. Open press, slide, run and socket features by your process's clearance (tolerances by process); leave designed gaps and clamp fits as drawn.
| feature | exact | mates with | fit | files |
|---|---|---|---|---|
| tube OD / ID (imperial) | OD n/32 in, wall 0.014 in (0.356): 1/8 in = Ø3.175 / Ø2.46 | next size up (OD +1/32 in) as telescoping sleeve; 3/32 in tube inside 1/8 in | slide | brass-* |
| tube OD / ID (metric) | OD 1–12 mm in 1 mm steps, wall 0.45: 4 mm = Ø4 / Ø3.1 | next 1 mm size up as sleeve; Ø3 shaft in the 4 mm tube | slide | brass-* |
Where the files are
Other publishers' files are linked, not hosted. "verify" = check the license at the link before commercial use.
| K&S Precision Metals | Round brass tube (sizes and wall) | web | K&S site terms verify |
| Wikipedia | Brass | web | CC BY-SA 4.0 (text) |
| Long Earth Society | Engine builds that use these parts (videos and write-ups) | web, video | LES site |
Free files
★ Free files 32 parts. Generated by Xem Studio from the standard; threads are plain cylinders at major diameter. CC BY 4.0. index.json
Use this part in your AI. Your AI gets the exact sizes and files straight from Xem and can design a mount, case or adapter around it. Direct downloads here are limited to one file every 10 minutes; through your AI they are unlimited.
Connect Xem to your AI (free, no account, about a minute)
https://xemstudio.com/mcp- Claude: Add to Claude
- ChatGPT (Plus or higher): open Connectors → Advanced → turn on Developer mode → Create → paste the address, no authentication → Create.
- Cursor: install with one click. VS Code: install with one click.
| brass-2-32in | K&S round brass tube 2/32 in OD (1.59 mm), .014 in wall, 50 mm stub | STEP · STL |
| brass-3-32in | K&S round brass tube 3/32 in OD (2.38 mm), .014 in wall, 50 mm stub | STEP · STL |
| brass-4-32in | K&S round brass tube 4/32 in OD (3.17 mm), .014 in wall, 50 mm stub | STEP · STL |
| brass-5-32in | K&S round brass tube 5/32 in OD (3.97 mm), .014 in wall, 50 mm stub | STEP · STL |
| brass-6-32in | K&S round brass tube 6/32 in OD (4.76 mm), .014 in wall, 50 mm stub | STEP · STL |
| brass-7-32in | K&S round brass tube 7/32 in OD (5.56 mm), .014 in wall, 50 mm stub | STEP · STL |
| brass-8-32in | K&S round brass tube 8/32 in OD (6.35 mm), .014 in wall, 50 mm stub | STEP · STL |
| brass-9-32in | K&S round brass tube 9/32 in OD (7.14 mm), .014 in wall, 50 mm stub | STEP · STL |
| brass-10-32in | K&S round brass tube 10/32 in OD (7.94 mm), .014 in wall, 50 mm stub | STEP · STL |
| brass-11-32in | K&S round brass tube 11/32 in OD (8.73 mm), .014 in wall, 50 mm stub | STEP · STL |
| brass-12-32in | K&S round brass tube 12/32 in OD (9.52 mm), .014 in wall, 50 mm stub | STEP · STL |
| brass-13-32in | K&S round brass tube 13/32 in OD (10.32 mm), .014 in wall, 50 mm stub | STEP · STL |
| brass-14-32in | K&S round brass tube 14/32 in OD (11.11 mm), .014 in wall, 50 mm stub | STEP · STL |
| brass-15-32in | K&S round brass tube 15/32 in OD (11.91 mm), .014 in wall, 50 mm stub | STEP · STL |
| brass-16-32in | K&S round brass tube 16/32 in OD (12.70 mm), .014 in wall, 50 mm stub | STEP · STL |
| brass-17-32in | K&S round brass tube 17/32 in OD (13.49 mm), .014 in wall, 50 mm stub | STEP · STL |
| brass-18-32in | K&S round brass tube 18/32 in OD (14.29 mm), .014 in wall, 50 mm stub | STEP · STL |
| brass-19-32in | K&S round brass tube 19/32 in OD (15.08 mm), .014 in wall, 50 mm stub | STEP · STL |
| brass-20-32in | K&S round brass tube 20/32 in OD (15.88 mm), .014 in wall, 50 mm stub | STEP · STL |
| brass-21-32in | K&S round brass tube 21/32 in OD (16.67 mm), .014 in wall, 50 mm stub | STEP · STL |
| brass-1mm | K&S metric brass tube 1 mm OD, 0.45 mm wall, 50 mm stub | STEP · STL |
| brass-2mm | K&S metric brass tube 2 mm OD, 0.45 mm wall, 50 mm stub | STEP · STL |
| brass-3mm | K&S metric brass tube 3 mm OD, 0.45 mm wall, 50 mm stub | STEP · STL |
| brass-4mm | K&S metric brass tube 4 mm OD, 0.45 mm wall, 50 mm stub | STEP · STL |
| brass-5mm | K&S metric brass tube 5 mm OD, 0.45 mm wall, 50 mm stub | STEP · STL |
| brass-6mm | K&S metric brass tube 6 mm OD, 0.45 mm wall, 50 mm stub | STEP · STL |
| brass-7mm | K&S metric brass tube 7 mm OD, 0.45 mm wall, 50 mm stub | STEP · STL |
| brass-8mm | K&S metric brass tube 8 mm OD, 0.45 mm wall, 50 mm stub | STEP · STL |
| brass-9mm | K&S metric brass tube 9 mm OD, 0.45 mm wall, 50 mm stub | STEP · STL |
| brass-10mm | K&S metric brass tube 10 mm OD, 0.45 mm wall, 50 mm stub | STEP · STL |
| brass-11mm | K&S metric brass tube 11 mm OD, 0.45 mm wall, 50 mm stub | STEP · STL |
| brass-12mm | K&S metric brass tube 12 mm OD, 0.45 mm wall, 50 mm stub | STEP · STL |
https://xemstudio.com/mcp to Claude, ChatGPT, Cursor or any MCP client (free, no account, one minute) and it can look up exact sizes, mating fits and free STEP/STL from every chat.Plain text: sheet.txt · JSON: /api/geometry?object=brass-tube-ks

Fits with




Questions
Do K&S brass tubes telescope?
Yes: the imperial series steps 1/32 in in OD with a .014 in wall, so each size slides into the next; the metric series steps 1 mm with a 0.45 mm wall.
What is the ID of 1/8 inch K&S brass tube?
0.097 in (2.46 mm): 3.175 OD minus two 0.356 walls. 3/32 in tube (2.38 OD) slides inside it.
Which brass tube fits a 3 mm shaft?
The 4 mm metric tube (3.1 mm ID) as a sleeve bearing; the 1/8 in imperial (2.46 ID) is too small.