Library › Hardware › Fasteners ·

Dowel pins, 2–6 mm (ISO 2338 / DIN 6325)

What hole size does a 3 mm dowel pin need for a press fit versus a slip fit? · Hardware · basis: ISO 2338 (h8) and DIN 6325 (m6) pin tolerances; fits per ISO 286

Also called: dowel pin, m3 dowel, 3mm pin, hinge pin, iso 2338, dowel pin size chart, pasador cilíndrico medidas, pino guia dimensões

Long Earth Society build part. Crank pins. Long Earth Society

Exact dimensions. Every file is drawn at true size with no tolerance added. The holes and pins that meet another part are listed below under Mating features, with the fit each joint needs; open those by your process's clearance before making the part. Mating features

sizes
5 in table

Notes

  • Holes for dowels are drawn at the pin diameter: Ø3 for a 3 mm pin. The fixed part takes a press fit and the moving part a running fit; apply your process allowance to each (see Mating features).
  • Common lengths 6–40 mm; 1.5 × diameter chamfer on each end.

Dowel pins, 2–6 mm size chart

dia (mm)press fit hole (mm)slip fit hole (mm)common lengths (mm)
21.952.28, 10, 12, 16, 20
32.953.210, 12, 16, 20, 30
43.954.212, 16, 20, 30, 40
54.955.216, 20, 30, 40
65.956.220, 30, 40, 50

Mating features

Drawn at the exact size. Open press, slide, run and socket features by your process's clearance (tolerances by process); leave designed gaps and clamp fits as drawn.

featureexactmates withfitfiles
pinØ2–Ø6hole in the moving part (turns on it)rundowel-*

Where the files are

Other publishers' files are linked, not hosted. "verify" = check the license at the link before commercial use.

McMaster-CarrDowel pins (free STEP/IGES/STL per part, for your own design use; no redistribution)STEP, IGES, STL, PDFMcMaster-Carr site terms: personal design use, no redistribution verify
WikipediaDowelwebCC BY-SA 4.0 (text)

Free files

★ Free files 23 parts. Generated by Xem Studio from the standard; threads are plain cylinders at major diameter. CC BY 4.0. index.json

Use this part in your AI. Your AI gets the exact sizes and files straight from Xem and can design a mount, case or adapter around it. Direct downloads here are limited to one file every 10 minutes; through your AI they are unlimited.

Connect Xem to your AI (free, no account, about a minute)
https://xemstudio.com/mcp
  1. Claude: Add to Claude
  2. ChatGPT (Plus or higher): open Connectors → Advanced → turn on Developer mode → Create → paste the address, no authentication → Create.
  3. Cursor: install with one click. VS Code: install with one click.
Other apps and full steps
dowel-2x8Ø2 × 8, chamferedSTEP · STL
dowel-2x10Ø2 × 10, chamferedSTEP · STL
dowel-2x12Ø2 × 12, chamferedSTEP · STL
dowel-2x16Ø2 × 16, chamferedSTEP · STL
dowel-2x20Ø2 × 20, chamferedSTEP · STL
dowel-3x10Ø3 × 10, chamferedSTEP · STL
dowel-3x12Ø3 × 12, chamferedSTEP · STL
dowel-3x16Ø3 × 16, chamferedSTEP · STL
dowel-3x20Ø3 × 20, chamferedSTEP · STL
dowel-3x30Ø3 × 30, chamferedSTEP · STL
dowel-4x12Ø4 × 12, chamferedSTEP · STL
dowel-4x16Ø4 × 16, chamferedSTEP · STL
dowel-4x20Ø4 × 20, chamferedSTEP · STL
dowel-4x30Ø4 × 30, chamferedSTEP · STL
dowel-4x40Ø4 × 40, chamferedSTEP · STL
dowel-5x16Ø5 × 16, chamferedSTEP · STL
dowel-5x20Ø5 × 20, chamferedSTEP · STL
dowel-5x30Ø5 × 30, chamferedSTEP · STL
dowel-5x40Ø5 × 40, chamferedSTEP · STL
dowel-6x20Ø6 × 20, chamferedSTEP · STL
dowel-6x30Ø6 × 30, chamferedSTEP · STL
dowel-6x40Ø6 × 40, chamferedSTEP · STL
dowel-6x50Ø6 × 50, chamferedSTEP · STL
Let your AI pull this. Add https://xemstudio.com/mcp to Claude, ChatGPT, Cursor or any MCP client (free, no account, one minute) and it can look up exact sizes, mating fits and free STEP/STL from every chat.
Set it up →

Plain text: sheet.txt · JSON: /api/geometry?object=dowel-pins-metric

Dowel pins, 2–6 mm (ISO 2338 / DIN 6325), isometric render of a generated part
Render of dowel-3x12 from the free STEP; not to scale.

Fits with

Questions

What hole size for a 3 mm dowel pin press fit?

The hole is drawn at 3.0 mm; that is a press fit in the fixed part and a running fit in the moving part, after your process allowance for each (ISO 2338 pins are h8, 3.000 / 2.986).

Can I use a 3 mm dowel pin as a hinge pin in a 3D print?

Yes: draw both holes at 3.0 mm; the moving part takes your running allowance and the fixed part your press allowance. Lengths 10–30 mm are common; pins are hardened steel, chamfered 1.5 × d.