Library › Hardware › Handles & tie-downs ·

Broom, mop, shovel and rake handle sizes and the 3/4-5 Acme broom / paint-pole thread

What size thread is on a broom handle? · Standard part · basis: Handle makers' and retailers' spec tabs (diameters, lengths); thread from makers who measured about 20 handles

Also called: broom handle thread size, mop handle thread, paint pole thread, shovel handle diameter, rake handle size, broom handle adapter

Exact dimensions. Every file is drawn at true size with no tolerance added. The holes and pins that meet another part are listed below under Mating features, with the fit each joint needs; open those by your process's clearance before making the part. Mating features

sizes
8 in table

Notes

  • Threaded broom, mop, squeegee and paint-pole handles use a 3/4-5 Acme-style thread (5 threads per inch, 5.08 mm pitch); there is no formal standard, so print slightly under (crest 18.0, root 13.0) and it bites into loose handles.
  • Handle diameters seen: 1 in (25.4) aluminium broom handles and angle brooms, 3/4 in (19.05) lobby brooms, 1-1/8 in (28.6) older tapered wood tool handles, 15/16 in (23.8) replacements; lengths 38, 48, 54, 60 in.
  • D-grips, fiberglass handle diameters and shovel/rake/hoe handle diameters are not published by the makers: a measured Xem scan is planned (calipers on your own handle work too).
  • Adapters (free STL): thread on top, socket below for your handle, a cross pin through the socket; print upright, 100 % infill on the threaded part.

Broom, mop, shovel and rake handle sizes and the 3/4-5 Acme broom /… size chart

iteminchmm
broom thread (3/4-5 Acme), crest0.7118.0
broom thread, root0.5113.0
thread pitch5 TPI5.08
aluminium broom handle125.4
lobby broom handle3/419.05
tapered wood tool handle (old)1-1/828.6
tapered wood tool handle (replacement)15/1623.8
handle lengths38 / 48 / 54 / 60965 / 1219 / 1372 / 1524

Mating features

Drawn at the exact size. Open press, slide, run and socket features by your process's clearance (tolerances by process); leave designed gaps and clamp fits as drawn.

featureexactmates withfitfiles
thread3/4-5 Acme-style: crest Ø18.0, root Ø13.0, pitch 5.08 (5 TPI)threaded broom, mop, squeegee and paint-pole handles (no formal standard)designedacme-3-4-5*
handle socketsØ25.4 / Ø28.6 / Ø23.81 in aluminium broom handle / 1-1/8 in older tapered wood handle / 15/16 in replacement handle; cross pin through the socketslideacme-3-4-5-to-*

Where the files are

Other publishers' files are linked, not hosted. "verify" = check the license at the link before commercial use.

Autodesk forum (maker measurement of ~20 handles)US paint / broom stick threadwebPublisher's page; dimensions are facts
softsolder.com (maker measurement)Broom handle screw thread replacement plugwebPublisher's page; dimensions are facts
WebstaurantStore (spec tab)Carlisle 60 in threaded aluminium broom handle, 1 inwebPublisher's page; dimensions are facts
Lalema (spec tab)Tapered wood handle 54 inwebPublisher's page; dimensions are facts
Zoro (spec tab)Libman broom handleswebPublisher's page; dimensions are facts

Free files

★ Free files 4 parts. Generated by Xem Studio from the standard; threads are plain cylinders at major diameter. CC BY 4.0. index.json

Use this part in your AI. Your AI gets the exact sizes and files straight from Xem and can design a mount, case or adapter around it. Direct downloads here are limited to one file every 10 minutes; through your AI they are unlimited.

Connect Xem to your AI (free, no account, about a minute)
https://xemstudio.com/mcp
  1. Claude: Add to Claude
  2. ChatGPT (Plus or higher): open Connectors → Advanced → turn on Developer mode → Create → paste the address, no authentication → Create.
  3. Cursor: install with one click. VS Code: install with one click.
Other apps and full steps
acme-3-4-5-plug3/4-5 Acme thread plug (crest 18.0, root 13.0, 20 long): replacement threaded tipSTEP · STL
acme-3-4-5-to-25.4-socketAdapter: 3/4-5 Acme thread to a Ø25.4 (1 in) handle socket, Ø4.4 cross pin holeSTEP · STL
acme-3-4-5-to-28.6-socketAdapter: 3/4-5 Acme thread to a Ø28.6 (1-1/8 in) handle socketSTEP · STL
acme-3-4-5-to-23.8-socketAdapter: 3/4-5 Acme thread to a Ø23.8 (15/16 in) handle socketSTEP · STL
Let your AI pull this. Add https://xemstudio.com/mcp to Claude, ChatGPT, Cursor or any MCP client (free, no account, one minute) and it can look up exact sizes, mating fits and free STEP/STL from every chat.
Set it up →

Plain text: sheet.txt · JSON: /api/geometry?object=broom-and-tool-handles

Broom, mop, shovel and rake handle sizes and the 3/4-5 Acme broom / paint-pole thread, isometric render of a generated part
Render of acme-3-4-5-to-28.6-socket from the free STEP; not to scale.

Fits with

Questions

What thread is on a broom handle?

A 3/4-5 Acme-style thread: 5 threads per inch, about 19 mm across the crests (no formal standard).

What diameter is a broom handle?

Usually 1 in (25.4 mm); lobby brooms 3/4 in; old wood tool handles 1-1/8 in.