Library › Hardware › Handles & tie-downs ·

E-track and L-track dimensions: slots 2.41 × 0.54 in on 2 in centers, rail widths, fittings

What are E-track slot dimensions? · Standard part · basis: US Cargo Control, Kinedyne and Uline product specifications; pitch counted from listed slot counts

Also called: e track dimensions, e-track slot size, e track spacing, l track dimensions, e track hook 3d print

Exact dimensions. Every file is drawn at true size with no tolerance added. The holes and pins that meet another part are listed below under Mating features, with the fit each joint needs; open those by your process's clearance before making the part. Mating features

sizes
9 in table

Notes

  • E-track slots 61.2 × 13.7 mm (2.41 × 0.54 in) on 50.8 mm (2 in) centres; 12-gauge steel (2.66 mm).
  • Horizontal rail 123.7–127 mm wide (4.87–5 in), about 10.7 mm deep; vertical rail 88.1 mm (3.47 in). Lengths 2, 5, 8, 10 ft. Mounting holes Ø6.35–7.1 (Uline: every 2 in).
  • Spring fittings: 2 × 3/4 in (50.8 × 19.05) opening, 1,500 lb working load. Printed E-track hooks: copy the fitting's spring tab or use a real fitting with a printed holder bolted to it; printed tabs are for light loads only.
  • L-track (airline track): 28.6 mm (1-1/8 in) wide, 12.7 tall, round pockets on 1 in pitch; heavy-duty 34.9 wide.
  • Not published: rail edge profile, slot corner radius, fitting tab thickness. The files here are flat sections with the published slots.

E-track and L-track dimensions: slots 2.41 × 0.54 in on 2 in… size chart

iteminchmm
slot (horizontal)2.41 × 0.5461.2 × 13.7
slot pitch250.8
horizontal width4.87–5123.7–127
vertical width3.4788.1
steel12 ga2.66
spring fitting opening2 × 3/450.8 × 19.05
L-track width1-1/828.6
L-track height1/212.7
L-track pitch125.4

Mating features

Drawn at the exact size. Open press, slide, run and socket features by your process's clearance (tolerances by process); leave designed gaps and clamp fits as drawn.

featureexactmates withfitfiles
E-track slots61.2 × 13.7 on 50.8 centres, 12 ga (2.66) steel; horizontal rail 123.7–127 wide, vertical rail 88.1spring fittings (opening 50.8 × 19.05); tab thickness not publisheddesignede-track-*
mounting holesØ6.35–7.1 (Uline: every 50.8)wall or floor fastenersdesignede-track-*
L-track pocketsround pockets on 25.4 pitch; track 28.6 wide × 12.7 tall (heavy duty 34.9 wide)L-track (airline) fittingsdesignedl-track-*

Where the files are

Other publishers' files are linked, not hosted. "verify" = check the license at the link before commercial use.

US Cargo ControlE-track 5 ft horizontal, galvanizedwebPublisher's page; dimensions are facts
US Cargo ControlE-track 5 ft vertical, galvanizedwebPublisher's page; dimensions are facts
Penn Tool (Kinedyne spec)Kinedyne horizontal E-track 10 ftwebPublisher's page; dimensions are facts
UlineZinc plated E-track rail (holes every 2 in)webPublisher's page; dimensions are facts
Trucking Depot5 ft horizontal E-track (30 slots)webPublisher's page; dimensions are facts
Tractor Supply (DC Cargo)E-track spring fittingwebPublisher's page; dimensions are facts
US Cargo ControlL-track 8 ftwebPublisher's page; dimensions are facts

Free files

★ Free files 3 parts. Generated by Xem Studio from the standard; threads are plain cylinders at major diameter. CC BY 4.0. index.json

Use this part in your AI. Your AI gets the exact sizes and files straight from Xem and can design a mount, case or adapter around it. Direct downloads here are limited to one file every 10 minutes; through your AI they are unlimited.

Connect Xem to your AI (free, no account, about a minute)
https://xemstudio.com/mcp
  1. Claude: Add to Claude
  2. ChatGPT (Plus or higher): open Connectors → Advanced → turn on Developer mode → Create → paste the address, no authentication → Create.
  3. Cursor: install with one click. VS Code: install with one click.
Other apps and full steps
e-track-horizontal-6-slotHorizontal E-track section, 6 slots 61.2 × 13.7 on 50.8 pitch, 123.7 wide, 2.66 (12 ga) flatSTEP · STL
e-track-vertical-6-slotVertical E-track section, 6 slots 61.2 × 13.5 on 50.8 pitch, 88.1 wideSTEP · STL
l-track-12-pocketL-track (airline track) envelope 28.6 × 12.7, pockets on 25.4 pitchSTEP · STL
Let your AI pull this. Add https://xemstudio.com/mcp to Claude, ChatGPT, Cursor or any MCP client (free, no account, one minute) and it can look up exact sizes, mating fits and free STEP/STL from every chat.
Set it up →

Plain text: sheet.txt · JSON: /api/geometry?object=e-track-and-l-track

E-track and L-track dimensions: slots 2.41 × 0.54 in on 2 in centers, rail widths, fittings, isometric render of a generated part
Render of e-track-vertical-6-slot from the free STEP; not to scale.

Fits with

Questions

What is E-track slot spacing?

2 in (50.8 mm) on centre, slots 2.41 × 0.54 in.