Library › Hardware › Pistons, cylinders & rods ·

Can-size hollow pucks Ø54 × 25, Ø62 × 30 and Ø72 × 35

What hollow puck fits inside a drink or food can? · Standard part · basis: Displacer = can bore − 4 (2 mm radial gap, designed; 2.1 mm in the Ø76.2 can); Ø2 hole at the 2 mm rod

Also called: can stirling displacer size, soda can stirling displacer, displacer dimensions 66 mm can, can engine displacer stl

Long Earth Society build part. The printed parts for the LES can engine, sized to the cans, syringes, CDs and bearings in the library. Long Earth Society

Exact dimensions. Every file is drawn at true size with no tolerance added. The holes and pins that meet another part are listed below under Mating features, with the fit each joint needs; open those by your process's clearance before making the part. Mating features

sizes
3 in table

Notes

  • The displacer that shuttles air between the hot and cold ends of the can. Each is a solid cylinder with a Ø2 hole on its axis for the 2 mm displacer rod.
  • The 2 mm radial gap to the can wall (2.1 mm in the 76.2 can) is designed: the air flows round the displacer through it.

Can-size hollow pucks Ø54 × 25, Ø62 × 30 and Ø72 × 35 size chart

filecandiameterlengthradial gaprod hole
can-displacer-62x30Ø66 (12 oz)62302.02
can-displacer-54x25Ø58 (sleek)54252.02
can-displacer-72x35Ø76.2 (steel 300)72352.12

Mating features

Drawn at the exact size. Open press, slide, run and socket features by your process's clearance (tolerances by process); leave designed gaps and clamp fits as drawn.

featureexactmates withfitfiles
displacer-to-can gap2 radial (Ø62 / 54 / 49.3 / 72 in Ø66 / 58 / 53.3 / 76.2)can boredesignedcan-displacer-*
displacer rod boreØ22 mm wire rodpresscan-displacer-*

Where the files are

Other publishers' files are linked, not hosted. "verify" = check the license at the link before commercial use.

WikipediaStirling enginewebCC BY-SA 4.0 (text)
Long Earth SocietyCan engine buildvideo, webLES site
Long Earth SocietyEngine builds (videos and write-ups)web, videoLES site

Free files

★ Free files 4 parts. Xem Studio design: free to use, print and sell things from; not to be republished as files. Xem Studio Design License. index.json

Use this part in your AI. Your AI gets the exact sizes and files straight from Xem and can design a mount, case or adapter around it. Direct downloads here are limited to one file every 10 minutes; through your AI they are unlimited.

Connect Xem to your AI (free, no account, about a minute)
https://xemstudio.com/mcp
  1. Claude: Add to Claude
  2. ChatGPT (Plus or higher): open Connectors → Advanced → turn on Developer mode → Create → paste the address, no authentication → Create.
  3. Cursor: install with one click. VS Code: install with one click.
Other apps and full steps
can-displacer-62x30displacer for a Ø66 can: Ø62 × 30 (2 mm radial gap: designed), Ø2 bore for the 2 mm wire rodSTEP · STL
can-displacer-54x25displacer for a Ø58 sleek can: Ø54 × 25 (2 mm radial gap: designed), Ø2 rod boreSTEP · STL
can-displacer-49x25displacer for a Ø53.3 slim can: Ø49.3 × 25 (2 mm radial gap: designed), Ø2 rod boreSTEP · STL
can-displacer-72x35displacer for a Ø76.2 can: Ø72 × 35 (2.1 mm radial gap: designed), Ø2 rod boreSTEP · STL
Let your AI pull this. Add https://xemstudio.com/mcp to Claude, ChatGPT, Cursor or any MCP client (free, no account, one minute) and it can look up exact sizes, mating fits and free STEP/STL from every chat.
Set it up →

Plain text: sheet.txt · JSON: /api/geometry?object=can-size-hollow-pucks

Can-size hollow pucks Ø54 × 25, Ø62 × 30 and Ø72 × 35, isometric render of a generated part
Render of can-displacer-62x30 from the free STEP; not to scale.

Questions

What size displacer for a 12 oz can Stirling engine?

Ø62 × 30 with a Ø2 rod hole: 2 mm radial gap to the Ø66 can.

Why is there a gap round the displacer?

The air has to flow past it from the hot end to the cold end; the 2 mm radial gap is that passage, by design.