Library › Hardware › Fasteners ·

Chipboard screws, DIN 7505 (3, 3.5, 4, 4.5, 5, 6 mm): pan, countersunk and oval-countersunk head dimensions, cross recess size + type-B envelope models

What are the head diameter, head height and cross recess size of a 4 mm or 5 mm chipboard (particle board) screw? · Standard part · basis: fasten.it's DIN 7505 table (types A, B and C, the 1986 edition, now with no current standard of its own), Flints' catalogue for the Spax drive sizes; six type-B envelope models as files

Also called: din 7505 dimensions, chipboard screw head diameter, 4 mm chipboard screw head size, 5 mm wood screw head diameter, spax screw dimensions 4.0 x 40, chipboard screw pz2, 3.5 mm wood screw head diameter, chipboard screw 4.5 head height, 6 mm chipboard screw pz3, din 7505 type b, metric wood screw sizes, wood screw 5 mm countersink diameter

Exact dimensions. True size, with no tolerance added.

length
40.0 mm
width
12.0 mm
height
12.0 mm

Notes

  • Millimetres. DIN 7505 covers screws for particle board with cross recess form Z in three head forms: A pan, B flat countersunk, C oval countersunk; nominal diameters 3, 3.5, 4, 4.5, 5 and 6 mm. fasten.it states there are no more technical norms for these screws and that sizes can vary between makers. The page prints no lengths. Columns follow the page: nominal diameter, P (pitch, ±10 %), dk (head diameter, min–max), k (head height, max for A and B, ≈ for C), a (max), r (min for A, min–max for B, max for C), d1 and d2 (min–max, not defined on the page), recess number, m (≈, not defined) and t (min–max, not defined).
  • Recess number agrees with the Spax pairing in Flints' catalogue: 3 mm PZ1; 3.5, 4, 4.5 and 5 mm PZ2; 6 mm PZ3 (Flints prints only the drive size, no head dimensions). Klimas' Ø5 mm KMH chipboard screw sheet (PZ2) was found but not tabulated.
  • Pilot holes are not on this page: no published table for metric chipboard screws could be verified (Spax' own sheets give only 'without pre-drilling, depending on the wood'). Flints' catalogue has a pilot-hole table for imperial gauge numbers, which is on wood-screws-flat-head-inch as a separate set of sources, not converted here.
  • Files are Xem-drawn envelopes of the type B head, not the real screw: a cone from dk max at the top down to the nominal diameter over k max, then a plain shank at the nominal diameter (the real thread major diameter is d1 and the thread is smaller at the root); no cross recess, no thread, no point. The overall length 40 mm is an example chosen by Xem for all six files, not a published length.
  • Not on this page: SPAX trade-name geometry (4CUT tip, T-STAR plus drive), Torx-drive chipboard screws, and screw lengths. Countersunk metric machine screws: countersunk-screws-metric.

Chipboard screws, DIN 7505 (3, 3.5, 4, 4.5, 5, 6 mm): pan… size chart

head typenominal ØP (pitch ±10 %)dk (head dia, min–max)k (height)a maxrd1 (min–max)d2 (min–max)recess no.m ≈t (min–max)
Type A (pan head)31.355.52–62.37 (max)1.350.25 min2.75–31.5–1.913.121.68–1.93
Type A (pan head)3.51.66.62–72.72 (max)1.60.3 min3.2–3.51.67–2.1523.811.65–2.11
Type A (pan head)41.87.42–82.92 (max)1.80.3 min3.7–42.02–2.524.651.9–2.36
Type A (pan head)4.528.42–93.15 (max)20.3 min4.2–4.52.22–2.7252.64–3.1
Type A (pan head)52.29.42–103.65 (max)2.20.3 min4.7–52.52–325.282.64–3.1
Type A (pan head)62.611.3–124.25 (max)2.60.4 min5.7–63.22–3.736.633.02–3.48
Type B (flat countersunk)31.355.6–61.9 (max)1.61.2–1.62.8–31.7–1.9131.6–2
Type B (flat countersunk)3.51.66.6–72.1 (max)1.81.5–1.93.3–3.52–2.2241.6–2.1
Type B (flat countersunk)41.87.5–82.5 (max)21.6–2.13.75–42.25–2.524.42.05–2.5
Type B (flat countersunk)4.528.5–92.7 (max)2.21.8–2.34.25–4.52.45–2.724.82.6–3.1
Type B (flat countersunk)52.29.5–103 (max)2.52–2.64.7–52.7–325.33–3.45
Type B (flat countersunk)62.611.5–123.6 (max)32–2.65.7–63.4–3.736.63–3.45
Type C (oval countersunk)31.355.7–61.8 (≈)2.351.5 max2.75–31.5–1.913.121.78–2.08
Type C (oval countersunk)3.51.66.64–72 (≈)2.61.8 max3.2–3.51.67–2.1524.061.81–2.11
Type C (oval countersunk)41.87.64–82.35 (≈)2.82 max3.7–42.02–2.524.652.42–2.72
Type C (oval countersunk)4.528.64–92.55 (≈)32.2 max4.2–4.52.22–2.725.082.85–3.15
Type C (oval countersunk)52.29.64–102.85 (≈)3.22.5 max4.7–52.52–325.282.89–3.35
Type C (oval countersunk)62.611.57–123.35 (≈)3.62.5 max5.7–63.22–3.7373.4–3.86

Where the files are

Other publishers' files are linked, not hosted. "verify" = check the license at the link before commercial use.

fasten.itDIN 7505 particle board (chipboard) screws with cross recess Z, types A (pan), B (countersunk) and C (oval countersunk), 3 to 6 mm: P, dk, k, a, r, d1, d2, recess no., m, t (1986 table; no lengths)webReference page; numbers only. The page does not define the column letters beyond the names dk, k and the nominal diameter
Flints (catalogue PDF)Wood screw gauge table (No. 2 to 14: diameter mm, pilot hole) and Spax metric screws by nominal diameter 3 / 3.5 / 4 / 4.5 / 5 / 6 mm with drive PZ1 / PZ2 / PZ3webDistributor catalogue; numbers only
Klimas (via JMB)Wkret-met KMH chipboard screw, countersunk head, Ø5 mm, PZ2: technical sheet (cross-reference; not tabulated)webMaker sheet; not used for numbers

Free files

★ Free files 6 parts. Generated by Xem Studio from the standard; threads are plain cylinders at major diameter. CC BY 4.0. index.json

Use this part in your AI. Your AI gets the exact sizes and files straight from Xem and can design a mount, case or adapter around it. Direct downloads here are limited to one file every 10 minutes; through your AI they are unlimited.

Connect Xem to your AI (free, no account, about a minute)
https://xemstudio.com/mcp
  1. Claude: Add to Claude
  2. ChatGPT (Plus or higher): open Connectors → Advanced → turn on Developer mode → Create → paste the address, no authentication → Create.
  3. Cursor: install with one click. VS Code: install with one click.
Other apps and full steps
chipboard-screw-din-7505-b-3x40-envelopeDIN 7505 type B 3 mm countersunk chipboard screw envelope: head Ø6 (dk max) tapering to the Ø3 nominal body over 1.9 mm (k max); plain body, example overall length 40 mm (Xem's choice); no cross recess, thread or pointSTEP · STL
chipboard-screw-din-7505-b-3-5x40-envelopeDIN 7505 type B 3.5 mm countersunk chipboard screw envelope: head Ø7 (dk max) tapering to the Ø3.5 nominal body over 2.1 mm (k max); plain body, example overall length 40 mm (Xem's choice); no cross recess, thread or pointSTEP · STL
chipboard-screw-din-7505-b-4x40-envelopeDIN 7505 type B 4 mm countersunk chipboard screw envelope: head Ø8 (dk max) tapering to the Ø4 nominal body over 2.5 mm (k max); plain body, example overall length 40 mm (Xem's choice); no cross recess, thread or pointSTEP · STL
chipboard-screw-din-7505-b-4-5x40-envelopeDIN 7505 type B 4.5 mm countersunk chipboard screw envelope: head Ø9 (dk max) tapering to the Ø4.5 nominal body over 2.7 mm (k max); plain body, example overall length 40 mm (Xem's choice); no cross recess, thread or pointSTEP · STL
chipboard-screw-din-7505-b-5x40-envelopeDIN 7505 type B 5 mm countersunk chipboard screw envelope: head Ø10 (dk max) tapering to the Ø5 nominal body over 3 mm (k max); plain body, example overall length 40 mm (Xem's choice); no cross recess, thread or pointSTEP · STL
chipboard-screw-din-7505-b-6x40-envelopeDIN 7505 type B 6 mm countersunk chipboard screw envelope: head Ø12 (dk max) tapering to the Ø6 nominal body over 3.6 mm (k max); plain body, example overall length 40 mm (Xem's choice); no cross recess, thread or pointSTEP · STL
Let your AI pull this. Add https://xemstudio.com/mcp to Claude, ChatGPT, Cursor or any MCP client (free, no account, one minute) and it can look up exact sizes, mating fits and free STEP/STL from every chat.
Set it up →

Plain text: sheet.txt · JSON: /api/geometry?object=chipboard-wood-screws-din-7505

Chipboard screws, DIN 7505 (3, 3.5, 4, 4.5, 5, 6 mm): pan, countersunk and oval-countersunk head dimensions, cross recess size + type-B envelope models, isometric render of a generated part
Render of chipboard-screw-din-7505-b-4-5x40-envelope from the free STEP; not to scale.

Fits with

Questions

What is the head diameter of a 4 mm chipboard screw?

Type B countersunk: 7.5 to 8 mm (dk), 2.5 mm high (k max); type A pan head 7.42 to 8 mm, 2.92 mm high. Recess number 2 (PZ2).

What Pozidriv size for a 6 mm chipboard screw?

Recess number 3 (PZ3) in DIN 7505 as listed on fasten.it; Flints lists Spax 6 mm screws with PZ3.

What countersink diameter for a 5 mm chipboard screw?

The type B head is 9.5 to 10 mm across (dk) and 3 mm high (k max); the oval head type C is 9.64 to 10 mm across.