Library › Hardware › Fasteners ·

Countersunk socket screws, M2–M8 (ISO 10642 / DIN 7991)

What countersink does an M3 flat head screw need? · Hardware · basis: ISO 10642 / DIN 7991 (actual head diameter, 90° countersink)

Also called: m3 countersunk, flat head screw, din 7991, iso 10642, csk screw

Exact dimensions. Every file is drawn at true size with no tolerance added. The holes and pins that meet another part are listed below under Mating features, with the fit each joint needs; open those by your process's clearance before making the part. Mating features

sizes
7 in table

Notes

  • Head sits flush in a 90° countersink. The exact countersink is the head itself: 90° cone, head diameter at the surface, depth = head height (see Mating features).
  • Head is a 90° cone from the shank to the head diameter with a short cylindrical rim on top; head height is about 0.55 × thread. Leave at least 1.5 mm of material under the head or it pulls through.

Countersunk socket screws, M2–M8 size chart

threadhead dia (mm)head height (mm)hex key (mm)countersink dia (mm)
M24.41.21.34.4
M2.55.51.51.55.5
M36.01.72.06.0
M48.02.32.58.0
M510.02.83.010.0
M612.03.34.012.0
M816.04.45.016.0

Mating features

Drawn at the exact size. Open press, slide, run and socket features by your process's clearance (tolerances by process); leave designed gaps and clamp fits as drawn.

featureexactmates withfitfiles
head90° × dk, depth k (M3 Ø6.0 × 1.7)90° countersinkdesignedcsk-*
shankthread majorISO 273 clearance holedesignedcsk-*

Where the files are

Other publishers' files are linked, not hosted. "verify" = check the license at the link before commercial use.

McMaster-CarrSocket head screws (free STEP/IGES/STL per part, for your own design use; no redistribution)STEP, IGES, STL, PDFMcMaster-Carr site terms: personal design use, no redistribution verify
WikipediaScrewwebCC BY-SA 4.0 (text)

Free files

★ Free files 35 parts. Generated by Xem Studio from the standard; threads are plain cylinders at major diameter. CC BY 4.0. index.json

Use this part in your AI. Your AI gets the exact sizes and files straight from Xem and can design a mount, case or adapter around it. Direct downloads here are limited to one file every 10 minutes; through your AI they are unlimited.

Connect Xem to your AI (free, no account, about a minute)
https://xemstudio.com/mcp
  1. Claude: Add to Claude
  2. ChatGPT (Plus or higher): open Connectors → Advanced → turn on Developer mode → Create → paste the address, no authentication → Create.
  3. Cursor: install with one click. VS Code: install with one click.
Other apps and full steps
csk-m2x4ISO 10642 M2 × 4, 90° head, thread as plain cylinderSTEP · STL
csk-m2x6ISO 10642 M2 × 6, 90° head, thread as plain cylinderSTEP · STL
csk-m2x8ISO 10642 M2 × 8, 90° head, thread as plain cylinderSTEP · STL
csk-m2x10ISO 10642 M2 × 10, 90° head, thread as plain cylinderSTEP · STL
csk-m2.5x6ISO 10642 M2.5 × 6, 90° head, thread as plain cylinderSTEP · STL
csk-m2.5x8ISO 10642 M2.5 × 8, 90° head, thread as plain cylinderSTEP · STL
csk-m2.5x10ISO 10642 M2.5 × 10, 90° head, thread as plain cylinderSTEP · STL
csk-m2.5x12ISO 10642 M2.5 × 12, 90° head, thread as plain cylinderSTEP · STL
csk-m3x6ISO 10642 M3 × 6, 90° head, thread as plain cylinderSTEP · STL
csk-m3x8ISO 10642 M3 × 8, 90° head, thread as plain cylinderSTEP · STL
csk-m3x10ISO 10642 M3 × 10, 90° head, thread as plain cylinderSTEP · STL
csk-m3x12ISO 10642 M3 × 12, 90° head, thread as plain cylinderSTEP · STL
csk-m3x16ISO 10642 M3 × 16, 90° head, thread as plain cylinderSTEP · STL
csk-m3x20ISO 10642 M3 × 20, 90° head, thread as plain cylinderSTEP · STL
csk-m4x8ISO 10642 M4 × 8, 90° head, thread as plain cylinderSTEP · STL
csk-m4x10ISO 10642 M4 × 10, 90° head, thread as plain cylinderSTEP · STL
csk-m4x12ISO 10642 M4 × 12, 90° head, thread as plain cylinderSTEP · STL
csk-m4x16ISO 10642 M4 × 16, 90° head, thread as plain cylinderSTEP · STL
csk-m4x20ISO 10642 M4 × 20, 90° head, thread as plain cylinderSTEP · STL
csk-m4x25ISO 10642 M4 × 25, 90° head, thread as plain cylinderSTEP · STL
csk-m5x10ISO 10642 M5 × 10, 90° head, thread as plain cylinderSTEP · STL
csk-m5x12ISO 10642 M5 × 12, 90° head, thread as plain cylinderSTEP · STL
csk-m5x16ISO 10642 M5 × 16, 90° head, thread as plain cylinderSTEP · STL
csk-m5x20ISO 10642 M5 × 20, 90° head, thread as plain cylinderSTEP · STL
csk-m5x25ISO 10642 M5 × 25, 90° head, thread as plain cylinderSTEP · STL
csk-m6x12ISO 10642 M6 × 12, 90° head, thread as plain cylinderSTEP · STL
csk-m6x16ISO 10642 M6 × 16, 90° head, thread as plain cylinderSTEP · STL
csk-m6x20ISO 10642 M6 × 20, 90° head, thread as plain cylinderSTEP · STL
csk-m6x25ISO 10642 M6 × 25, 90° head, thread as plain cylinderSTEP · STL
csk-m6x30ISO 10642 M6 × 30, 90° head, thread as plain cylinderSTEP · STL
csk-m8x16ISO 10642 M8 × 16, 90° head, thread as plain cylinderSTEP · STL
csk-m8x20ISO 10642 M8 × 20, 90° head, thread as plain cylinderSTEP · STL
csk-m8x25ISO 10642 M8 × 25, 90° head, thread as plain cylinderSTEP · STL
csk-m8x30ISO 10642 M8 × 30, 90° head, thread as plain cylinderSTEP · STL
csk-m8x40ISO 10642 M8 × 40, 90° head, thread as plain cylinderSTEP · STL
Let your AI pull this. Add https://xemstudio.com/mcp to Claude, ChatGPT, Cursor or any MCP client (free, no account, one minute) and it can look up exact sizes, mating fits and free STEP/STL from every chat.
Set it up →

Plain text: sheet.txt · JSON: /api/geometry?object=countersunk-screws-metric

Countersunk socket screws, M2–M8 (ISO 10642 / DIN 7991), isometric render of a generated part
Render of csk-m4x12 from the free STEP; not to scale.

Fits with

Questions

What countersink for an M3 flat head screw?

90° cone, 6.0 mm diameter at the surface (the head diameter), 1.7 mm deep. That is the exact size; open it by your process allowance (see Mating features).

What countersink for M4 and M5 flat head screws?

M4: 8.0 mm diameter × 2.3 mm deep. M5: 10.0 mm × 2.8 mm (the head diameters). Always 90° for metric (82° is the imperial standard, not interchangeable).

Can I countersink a 3D printed part?

Yes if there's 1.5 mm or more of material under the head and the cone is modeled, not drilled; printed cones come out clean when the part is oriented with the cone opening downward or the overhang is under 45°.