Library › Mechanisms › Linkages ·

Crank gear, module 1, 30 T with a Ø3 crank-pin hole at 10 mm

What is a crank gear? · Modern device · basis: Xem Studio design following Brown's figure (1868); true size, no printing allowance

Also called: crank gear, gear with crank pin, engranaje con manivela, Kurbelzahnrad

Exact dimensions. True size, with no tolerance added.

length
31.99 mm
width
31.89 mm
height
8.0 mm

Notes

  • The catalog module 1, 30-tooth gear (Ø10 bore, 8 face) with a Ø3 crank-pin hole on a 10 mm radius, a quarter tooth pitch (3°) off a tooth centre so that two of them meshed at 30 mm turn as mirror images (Cartwright's parallel motion).
  • Xem Studio design following Brown's figure; true size, no printing allowance (apply your own to the mating features).

Crank gear, module 1, 30 T with a Ø3 crank-pin hole at 10 mm size chart

dimensionvalue
module1
teeth30
crank radius10 mm
pin holeØ3 at 3° from a tooth centre
boreØ10

Where the files are

Other publishers' files are linked, not hosted. "verify" = check the license at the link before commercial use.

Henry T. Brown (1868, public domain)Five Hundred and Seven Mechanical Movements — scan on archive.orgwebPublisher's page; dimensions are facts
507movements.comBrown's movement No. 328: figure, his text and an animationwebPublisher's page; dimensions are facts
Xem StudiodrawingwebPublisher's page; dimensions are facts

Free files

★ Free files 1 parts. Xem Studio design: free to use, print and sell things from; not to be republished as files. Xem Studio Design License. index.json

Use this part in your AI. Your AI gets the exact sizes and files straight from Xem and can design a mount, case or adapter around it. Direct downloads here are limited to one file every 10 minutes; through your AI they are unlimited.

Connect Xem to your AI (free, no account, about a minute)
https://xemstudio.com/mcp
  1. Claude: Add to Claude
  2. ChatGPT (Plus or higher): open Connectors → Advanced → turn on Developer mode → Create → paste the address, no authentication → Create.
  3. Cursor: install with one click. VS Code: install with one click.
Other apps and full steps
crank-gear-m1-30t-r10crank gear, z 0..8STEP · STL
Let your AI pull this. Add https://xemstudio.com/mcp to Claude, ChatGPT, Cursor or any MCP client (free, no account, one minute) and it can look up exact sizes, mating fits and free STEP/STL from every chat.
Set it up →

Plain text: sheet.txt · JSON: /api/geometry?object=crank-gear-m1-30t-pin-r10

Crank gear, module 1, 30 T with a Ø3 crank-pin hole at 10 mm, isometric render of a generated part
Render of crank-gear-m1-30t-r10 from the free STEP; not to scale.

Fits with

Questions

What is a crank gear?

The catalog module 1, 30-tooth gear (Ø10 bore, 8 face) with a Ø3 crank-pin hole on a 10 mm radius, a quarter tooth pitch (3°) off a tooth centre so that two of them meshed at 30 mm turn as mirror images (Cartwright's parallel motion).