Library › Hardware › Bearings, rails & motion ·

Deep-groove ball bearings, series 60, 62, 63, 68 and 69: 6000 to 6310 (ISO 15)

What are the dimensions of a 6205 bearing? · Standard part · basis: ISO 15 boundary dimensions: bore d, outside D, width B

Also called: 6205 bearing dimensions, 6203 bearing size, 6806 thin bearing, 6900 bearing step, ball bearing cad

Exact dimensions. Every file is drawn at true size with no tolerance added. The holes and pins that meet another part are listed below under Mating features, with the fit each joint needs; open those by your process's clearance before making the part. Mating features

sizes
55 in table

Notes

  • Drawn as inner and outer rings at the boundary dimensions with shields recessed 0.5 mm; the corner chamfers are left out (housings and shafts are designed to d, D and B).

Deep-groove ball bearings, series 60, 62, 63, 68 and 69: 6000 to 6310 size chart

designationbore (mm)od (mm)width (mm)
600010268
600112288
600215329
6003173510
6004204212
6005254712
6006305513
6007356214
6008406815
6009457516
6010508016
620010309
6201123210
6202153511
6203174012
6204204714
6205255215
6206306216
6207357217
6208408018
6209458519
6210509020
6300103511
6301123712
6302154213
6303174714
6304205215
6305256217
6306307219
6307358021
6308409023
63094510025
63105011027
680010195
680112215
680215245
680317265
680420327
680525377
680630427
680735477
680840527
680945587
681050657
690010226
690112246
690215287
690317307
690420379
690525429
690630479
6907355510
6908406212
6909456812
6910507212

Mating features

Drawn at the exact size. Open press, slide, run and socket features by your process's clearance (tolerances by process); leave designed gaps and clamp fits as drawn.

featureexactmates withfitfiles
outer raceOD D per designation (6205 Ø52)housing bore at D, H7 (stationary outer ring, easily displaceable); housing depth = width Bpressbearing-*
borebore d per designation (6205 Ø25)shaft at d, rotating inner ring: bore up to 18 mm h5 (light) or js5 (normal); over 18 to 100 mm js6 (light) or k5 (normal)slidebearing-*
widthB per designation (6205 15)shoulder or retaining face on each side; shields recessed 0.5 mm, so face contact is on the rings onlydesignedbearing-*

Where the files are

Other publishers' files are linked, not hosted. "verify" = check the license at the link before commercial use.

ISOISO 15 Rolling bearings: radial bearings, boundary dimensionsstandardISO; dimensions are facts verify

Free files

★ Free files 55 parts. Generated by Xem Studio from the standard; threads are plain cylinders at major diameter. CC BY 4.0. index.json

Use this part in your AI. Your AI gets the exact sizes and files straight from Xem and can design a mount, case or adapter around it. Direct downloads here are limited to one file every 10 minutes; through your AI they are unlimited.

Connect Xem to your AI (free, no account, about a minute)
https://xemstudio.com/mcp
  1. Claude: Add to Claude
  2. ChatGPT (Plus or higher): open Connectors → Advanced → turn on Developer mode → Create → paste the address, no authentication → Create.
  3. Cursor: install with one click. VS Code: install with one click.
Other apps and full steps
bearing-60006000: 10 × 26 × 8 (bore × OD × width), shields drawn 0.5 in from each faceSTEP · STL
bearing-60016001: 12 × 28 × 8 (bore × OD × width), shields drawn 0.5 in from each faceSTEP · STL
bearing-60026002: 15 × 32 × 9 (bore × OD × width), shields drawn 0.5 in from each faceSTEP · STL
bearing-60036003: 17 × 35 × 10 (bore × OD × width), shields drawn 0.5 in from each faceSTEP · STL
bearing-60046004: 20 × 42 × 12 (bore × OD × width), shields drawn 0.5 in from each faceSTEP · STL
bearing-60056005: 25 × 47 × 12 (bore × OD × width), shields drawn 0.5 in from each faceSTEP · STL
bearing-60066006: 30 × 55 × 13 (bore × OD × width), shields drawn 0.5 in from each faceSTEP · STL
bearing-60076007: 35 × 62 × 14 (bore × OD × width), shields drawn 0.5 in from each faceSTEP · STL
bearing-60086008: 40 × 68 × 15 (bore × OD × width), shields drawn 0.5 in from each faceSTEP · STL
bearing-60096009: 45 × 75 × 16 (bore × OD × width), shields drawn 0.5 in from each faceSTEP · STL
bearing-60106010: 50 × 80 × 16 (bore × OD × width), shields drawn 0.5 in from each faceSTEP · STL
bearing-62006200: 10 × 30 × 9 (bore × OD × width), shields drawn 0.5 in from each faceSTEP · STL
bearing-62016201: 12 × 32 × 10 (bore × OD × width), shields drawn 0.5 in from each faceSTEP · STL
bearing-62026202: 15 × 35 × 11 (bore × OD × width), shields drawn 0.5 in from each faceSTEP · STL
bearing-62036203: 17 × 40 × 12 (bore × OD × width), shields drawn 0.5 in from each faceSTEP · STL
bearing-62046204: 20 × 47 × 14 (bore × OD × width), shields drawn 0.5 in from each faceSTEP · STL
bearing-62056205: 25 × 52 × 15 (bore × OD × width), shields drawn 0.5 in from each faceSTEP · STL
bearing-62066206: 30 × 62 × 16 (bore × OD × width), shields drawn 0.5 in from each faceSTEP · STL
bearing-62076207: 35 × 72 × 17 (bore × OD × width), shields drawn 0.5 in from each faceSTEP · STL
bearing-62086208: 40 × 80 × 18 (bore × OD × width), shields drawn 0.5 in from each faceSTEP · STL
bearing-62096209: 45 × 85 × 19 (bore × OD × width), shields drawn 0.5 in from each faceSTEP · STL
bearing-62106210: 50 × 90 × 20 (bore × OD × width), shields drawn 0.5 in from each faceSTEP · STL
bearing-63006300: 10 × 35 × 11 (bore × OD × width), shields drawn 0.5 in from each faceSTEP · STL
bearing-63016301: 12 × 37 × 12 (bore × OD × width), shields drawn 0.5 in from each faceSTEP · STL
bearing-63026302: 15 × 42 × 13 (bore × OD × width), shields drawn 0.5 in from each faceSTEP · STL
bearing-63036303: 17 × 47 × 14 (bore × OD × width), shields drawn 0.5 in from each faceSTEP · STL
bearing-63046304: 20 × 52 × 15 (bore × OD × width), shields drawn 0.5 in from each faceSTEP · STL
bearing-63056305: 25 × 62 × 17 (bore × OD × width), shields drawn 0.5 in from each faceSTEP · STL
bearing-63066306: 30 × 72 × 19 (bore × OD × width), shields drawn 0.5 in from each faceSTEP · STL
bearing-63076307: 35 × 80 × 21 (bore × OD × width), shields drawn 0.5 in from each faceSTEP · STL
bearing-63086308: 40 × 90 × 23 (bore × OD × width), shields drawn 0.5 in from each faceSTEP · STL
bearing-63096309: 45 × 100 × 25 (bore × OD × width), shields drawn 0.5 in from each faceSTEP · STL
bearing-63106310: 50 × 110 × 27 (bore × OD × width), shields drawn 0.5 in from each faceSTEP · STL
bearing-68006800: 10 × 19 × 5 (bore × OD × width), shields drawn 0.5 in from each faceSTEP · STL
bearing-68016801: 12 × 21 × 5 (bore × OD × width), shields drawn 0.5 in from each faceSTEP · STL
bearing-68026802: 15 × 24 × 5 (bore × OD × width), shields drawn 0.5 in from each faceSTEP · STL
bearing-68036803: 17 × 26 × 5 (bore × OD × width), shields drawn 0.5 in from each faceSTEP · STL
bearing-68046804: 20 × 32 × 7 (bore × OD × width), shields drawn 0.5 in from each faceSTEP · STL
bearing-68056805: 25 × 37 × 7 (bore × OD × width), shields drawn 0.5 in from each faceSTEP · STL
bearing-68066806: 30 × 42 × 7 (bore × OD × width), shields drawn 0.5 in from each faceSTEP · STL
bearing-68076807: 35 × 47 × 7 (bore × OD × width), shields drawn 0.5 in from each faceSTEP · STL
bearing-68086808: 40 × 52 × 7 (bore × OD × width), shields drawn 0.5 in from each faceSTEP · STL
bearing-68096809: 45 × 58 × 7 (bore × OD × width), shields drawn 0.5 in from each faceSTEP · STL
bearing-68106810: 50 × 65 × 7 (bore × OD × width), shields drawn 0.5 in from each faceSTEP · STL
bearing-69006900: 10 × 22 × 6 (bore × OD × width), shields drawn 0.5 in from each faceSTEP · STL
bearing-69016901: 12 × 24 × 6 (bore × OD × width), shields drawn 0.5 in from each faceSTEP · STL
bearing-69026902: 15 × 28 × 7 (bore × OD × width), shields drawn 0.5 in from each faceSTEP · STL
bearing-69036903: 17 × 30 × 7 (bore × OD × width), shields drawn 0.5 in from each faceSTEP · STL
bearing-69046904: 20 × 37 × 9 (bore × OD × width), shields drawn 0.5 in from each faceSTEP · STL
bearing-69056905: 25 × 42 × 9 (bore × OD × width), shields drawn 0.5 in from each faceSTEP · STL
bearing-69066906: 30 × 47 × 9 (bore × OD × width), shields drawn 0.5 in from each faceSTEP · STL
bearing-69076907: 35 × 55 × 10 (bore × OD × width), shields drawn 0.5 in from each faceSTEP · STL
bearing-69086908: 40 × 62 × 12 (bore × OD × width), shields drawn 0.5 in from each faceSTEP · STL
bearing-69096909: 45 × 68 × 12 (bore × OD × width), shields drawn 0.5 in from each faceSTEP · STL
bearing-69106910: 50 × 72 × 12 (bore × OD × width), shields drawn 0.5 in from each faceSTEP · STL
Let your AI pull this. Add https://xemstudio.com/mcp to Claude, ChatGPT, Cursor or any MCP client (free, no account, one minute) and it can look up exact sizes, mating fits and free STEP/STL from every chat.
Set it up →

Plain text: sheet.txt · JSON: /api/geometry?object=deep-groove-ball-bearings-series

Deep-groove ball bearings, series 60, 62, 63, 68 and 69: 6000 to 6310 (ISO 15), isometric render of a generated part
Render of bearing-6305 from the free STEP; not to scale.

Fits with

Ball bearings, 683 to 6210 and flanged F6xx (ISO 15), isometric render of a generated part
Ball bearings, 683 to 6210 and flanged F6xx (ISO 15)44 sizes★ 44 files
Bearing pocket gauge for 623, 625 and 608 (Ø10 / Ø16 / Ø22, +0 / +0.2 / +0.4), isometric render of a generated part
Bearing pocket gauge for 623, 625 and 608 (Ø10 / Ø16 / Ø22, +0 / +0.2 / +0.4)3 sizes★ 1 file
Flanged ball bearings F6xx and MF: F623, F624, F625, F688, F695, F608 and more: bore, OD, width, flange diameter and thickness, isometric render of a generated part
Flanged ball bearings F6xx and MF: F623, F624, F625, F688, F695, F608 and more: bore, OD, width, flange diameter and thickness43 sizes★ 19 files
Retaining rings DIN 472 (internal, for bores): ring dimensions and groove diameter d2 × width m, 8 to 110 mm, isometric render of a generated part
Retaining rings DIN 472 (internal, for bores): ring dimensions and groove diameter d2 × width m, 8 to 110 mm41 sizes★ 11 files
Thrust ball bearings 51100 series (51100 to 51130): bore, outside diameter, height, housing washer bore + STEP/STL envelopes, isometric render of a generated part
Thrust ball bearings 51100 series (51100 to 51130): bore, outside diameter, height, housing washer bore + STEP/STL envelopes25 sizes★ 11 files
HK needle roller bearings (drawn cup): HK0306 to HK2020 bore, outside diameter and width + STEP/STL envelopes, isometric render of a generated part
HK needle roller bearings (drawn cup): HK0306 to HK2020 bore, outside diameter and width + STEP/STL envelopes26 sizes★ 8 files
Angular contact ball bearings 7200 B and 7300 B (7205B, 7206B, 7305B and more): bore, OD, width, r, r1 + 23 ring-envelope STEP/STL files, isometric render of a generated part
Angular contact ball bearings 7200 B and 7300 B (7205B, 7206B, 7305B and more): bore, OD, width, r, r1 + 23 ring-envelope STEP/STL files50 sizes★ 23 files
Cylindrical roller bearings NU2xx and NU3xx (NU205, NU206, NU208, NU305, NU310 and more): bore, OD, width, r, Fw + 18 ring-envelope STEP/STL files, isometric render of a generated part
Cylindrical roller bearings NU2xx and NU3xx (NU205, NU206, NU208, NU305, NU310 and more): bore, OD, width, r, Fw + 18 ring-envelope STEP/STL files37 sizes★ 18 files
Spherical roller bearings 222xx and 223xx (22205, 22206, 22208, 22210, 22308 and more): bore, OD, width, r + 13 ring-envelope STEP/STL files, isometric render of a generated part
Spherical roller bearings 222xx and 223xx (22205, 22206, 22208, 22210, 22308 and more): bore, OD, width, r + 13 ring-envelope STEP/STL files50 sizes★ 13 files
length
Tapered roller bearings, metric (30203 to 32328, ISO 355): bore, OD, T, B, C and chamfer r, 15 to 140 mm (302xx, 303xx, 320xx, 322xx, 323xx, 329xx)131 sizes★ sheet
Self-aligning ball bearings 1204, 1205, 2205, 2305 and the 12xx, 13xx, 22xx, 23xx series: bore, OD, width, r min + 16 ring-envelope STEP/STL files, isometric render of a generated part
Self-aligning ball bearings 1204, 1205, 2205, 2305 and the 12xx, 13xx, 22xx, 23xx series: bore, OD, width, r min + 16 ring-envelope STEP/STL files91 sizes★ 16 files

Questions

6205?

25 × 52 × 15 mm.

68 vs 69?

Both thin-section: 68 is the thinner, 69 a little deeper.