Library › 3D printing › Calibration & test prints ·

Bearing pocket gauge for 623, 625 and 608 (Ø10 / Ø16 / Ø22, +0 / +0.2 / +0.4)

How tight should a 3D printed 608 bearing pocket be? · Hardware · basis: Pockets at the bearing OD (623 Ø10, 625 Ø16, 608 Ø22) and +0.2 / +0.4, 6 deep

Also called: bearing pocket tolerance, 608 pocket size 3d print, bearing press fit test, 623 pocket gauge, bearing seat calibration

Long Earth Society build part. Print these first to measure your allowances; every LES part is drawn at exact size. Long Earth Society

Exact dimensions. Every file is drawn at true size with no tolerance added. The holes and pins that meet another part are listed below under Mating features, with the fit each joint needs; open those by your process's clearance before making the part. Mating features

sizes
3 in table

Notes

  • Every file on this site is drawn at exact size with no printing allowance; this gauge steps through sizes around the nominal so you can measure the allowance your process needs for one fit class, then apply it only to the features each object lists under Mating features.
  • The gauge is a 100 × 36 × 8 mm block with nine pockets 6 mm deep: Ø10.0, 10.2, 10.4 (623), Ø16.0, 16.2, 16.4 (625), Ø22.0, 22.2, 22.4 (608).
  • Press each bearing in with a thumb: the pocket that holds it, minus the bearing OD, is your bearing-pocket allowance.
  • The three Ø22 pockets run out through the long edge of the block (they are 0.2–3.2 mm wider than the edge allows), which does not affect reading the bore.

Bearing pocket gauge for 623, 625 and 608 size chart

bearingod (mm)pockets (mm)depth (mm)
6231010.0 / 10.2 / 10.46
6251616.0 / 16.2 / 16.46
6082222.0 / 22.2 / 22.46

Mating features

Drawn at the exact size. Open press, slide, run and socket features by your process's clearance (tolerances by process); leave designed gaps and clamp fits as drawn.

featureexactmates withfitfiles
gauge sizesstepped around nominalthe true pin, nut, bearing or extrusion slot being testeddesignedall

Where the files are

Other publishers' files are linked, not hosted. "verify" = check the license at the link before commercial use.

WikipediaEngineering tolerancewebCC BY-SA 4.0 (text)
PrusaKnowledge base: XY size compensationwebPrusa KB verify
Long Earth SocietyEngine and rig buildsweb, videoLES site

Free files

★ Free files 1 parts. Xem Studio design: free to use, print and sell things from; not to be republished as files. Xem Studio Design License. index.json

Use this part in your AI. Your AI gets the exact sizes and files straight from Xem and can design a mount, case or adapter around it. Direct downloads here are limited to one file every 10 minutes; through your AI they are unlimited.

Connect Xem to your AI (free, no account, about a minute)
https://xemstudio.com/mcp
  1. Claude: Add to Claude
  2. ChatGPT (Plus or higher): open Connectors → Advanced → turn on Developer mode → Create → paste the address, no authentication → Create.
  3. Cursor: install with one click. VS Code: install with one click.
Other apps and full steps
bearing-pocket-gauge-623-625-608bearing pocket gauge, 100 × 48 × 8 block: Ø10.0/10.2/10.4 (623) and Ø16.0/16.2/16.4 (625) in the top row, Ø22.0/22.2/22.4 (608) in the bottom row, 6 deep, every pocket separate with at least 2.9 mm of wall to its neighbours and the block edgesSTEP · STL
Let your AI pull this. Add https://xemstudio.com/mcp to Claude, ChatGPT, Cursor or any MCP client (free, no account, one minute) and it can look up exact sizes, mating fits and free STEP/STL from every chat.
Set it up →

Plain text: sheet.txt · JSON: /api/geometry?object=bearing-pocket-gauge

Bearing pocket gauge for 623, 625 and 608 (Ø10 / Ø16 / Ø22, +0 / +0.2 / +0.4), isometric render of a generated part
Render of bearing-pocket-gauge-623-625-608 from the free STEP; not to scale.

You might also need

Questions

What size pocket for a 608 bearing?

The bearing is Ø22; the pocket is drawn at Ø22.000 and this gauge shows how much your process needs on top.

Which bearings does the gauge cover?

623 (Ø10), 625 (Ø16) and 608 (Ø22).