Library › Mechanisms › Gears ·
Eccentric bush Ø16 × 12 with Ø6 bore offset 2.5 mm and a 50 mm lever
How does an eccentric bush throw gears in and out of mesh? · Modern device · basis: Xem Studio design following Brown's figure (1868); true size, no printing allowance
Also called: eccentric bush, eccentric sleeve, back gear eccentric, casquillo excéntrico, Exzenterbuchse
Exact dimensions. True size, with no tolerance added.
- length
- 58.0 mm
- width
- 16.0 mm
- height
- 12.0 mm
Notes
- Ø16 × 12 bush whose Ø6 bore is 2.5 mm off centre, with a 10 × 4 lever: turning it half a turn in its housing moves the axle 5 mm, more than the 2.25 mm tooth depth of module 1 gears, so the pinion swings fully in or out of mesh.
- Xem Studio design following Brown's figure; true size, no printing allowance (apply your own to the mating features).
Eccentric bush Ø16 × 12 with Ø6 bore offset 2.5 mm and a 50 mm lever size chart
| dimension | value |
|---|---|
| bush | Ø16 × 12 |
| bore | Ø6, 2.5 mm off centre |
| lever | 50 × 10 × 4 |
Where the files are
Other publishers' files are linked, not hosted. "verify" = check the license at the link before commercial use.
| Henry T. Brown (1868, public domain) | Five Hundred and Seven Mechanical Movements — scan on archive.org | web | Publisher's page; dimensions are facts |
| 507movements.com | Brown's movement No. 56: figure, his text and an animation | web | Publisher's page; dimensions are facts |
| Xem Studio | drawing | web | Publisher's page; dimensions are facts |
Free files
★ Free files 1 parts. Xem Studio design: free to use, print and sell things from; not to be republished as files. Xem Studio Design License. index.json
Use this part in your AI. Your AI gets the exact sizes and files straight from Xem and can design a mount, case or adapter around it. Direct downloads here are limited to one file every 10 minutes; through your AI they are unlimited.
Connect Xem to your AI (free, no account, about a minute)
https://xemstudio.com/mcp- Claude: Add to Claude
- ChatGPT (Plus or higher): open Connectors → Advanced → turn on Developer mode → Create → paste the address, no authentication → Create.
- Cursor: install with one click. VS Code: install with one click.
| eccentric-bush-16-bore6-e2-5-lever | bush, axis Z, centre at origin, bore at (-2.5, 0), z -14..-2 | STEP · STL |
https://xemstudio.com/mcp to Claude, ChatGPT, Cursor or any MCP client (free, no account, one minute) and it can look up exact sizes, mating fits and free STEP/STL from every chat.Plain text: sheet.txt · JSON: /api/geometry?object=eccentric-bush-16-bore6-e2-5-lever

Fits with
Questions
How does an eccentric bush throw gears in and out of mesh?
Ø16 × 12 bush whose Ø6 bore is 2.5 mm off centre, with a 10 × 4 lever: turning it half a turn in its housing moves the axle 5 mm, more than the 2.25 mm tooth depth of module 1 gears, so the pinion swings fully in or out of mesh.
