Library › Hardware › Framing ·
Unequal angles (EN 10056-1): L 100x50x8, L 150x100x10, L 30x20x3 to L 200x150x15 dimensions + STEP/STL
What are the dimensions of L 100x50x8 (root radius, toe radius)? · Standard part · basis: EN 10056-1 table values (r1, r2, t, area) as reproduced by Roymech and British Steel
Also called: l 100x50x8, l100x50x8, l 100x50x8 dimensions, l 150x100x10, l 75x50x6, l 60x40x5, l 80x40x6, l 200x100x12, l 30x20x3, unequal angle dimensions mm, en 10056 unequal angle, unequal angle step file
Exact dimensions. True size, with no tolerance added.
- length
- 100.0 mm
Notes
- Unequal leg hot-rolled angles to EN 10056-1: L 100x50x8 has legs of the sizes shown and a thickness t in mm. Each size has a root radius r1 and a toe radius r2 (about r1/2) printed in the standard's table.
- r1 and r2 are from Roymech's reproduction of the EN 10056-1 table (checked against British Steel's datasheet for 120 to 200 mm); the standard itself is paywalled. r2 is drawn on the inner corner at the end of each leg only; the drawn area matches the published area within 2 % on every drawn size, which confirms that placement.
- Files are 100 mm long extrusions along X with the heel at the origin: leg a along +y, leg b along +z.
- 17 of the 46 sizes have files; all sizes are in the table.
Unequal angles (EN 10056-1): L 100x50x8, L 150x100x10, L 30x20x3 to… size chart
| size (mm) | mass (kg/m) | leg a (mm) | leg b (mm) | t (mm) | r1 (mm) | r2 (mm) | area (cm2) |
|---|---|---|---|---|---|---|---|
| 200x150x15 | 39.6 | 200.0 | 150.0 | 15.0 | 15.0 | 7.5 | 50.5 |
| 200x150x12 | 32.0 | 200.0 | 150.0 | 12.0 | 15.0 | 7.5 | 40.8 |
| 200x100x15 | 33.7 | 200.0 | 100.0 | 15.0 | 15.0 | 7.5 | 43.0 |
| 200x100x12 | 27.3 | 200.0 | 100.0 | 12.0 | 15.0 | 7.5 | 34.8 |
| 200x100x10 | 23.0 | 200.0 | 100.0 | 10.0 | 15.0 | 7.5 | 29.2 |
| 150x100x12 | 22.5 | 150.0 | 100.0 | 12.0 | 12.0 | 6.0 | 28.7 |
| 150x100x10 | 19.0 | 150.0 | 100.0 | 10.0 | 12.0 | 6.0 | 24.2 |
| 150x90x15 | 26.6 | 150.0 | 90.0 | 15.0 | 12.0 | 6.0 | 33.9 |
| 150x90x12 | 21.6 | 150.0 | 90.0 | 12.0 | 12.0 | 6.0 | 27.5 |
| 150x90x10 | 18.2 | 150.0 | 90.0 | 10.0 | 12.0 | 6.0 | 23.2 |
| 150x75x15 | 24.8 | 150.0 | 75.0 | 15.0 | 11.0 | 5.5 | 31.6 |
| 150x75x12 | 20.2 | 150.0 | 75.0 | 12.0 | 11.0 | 5.5 | 25.7 |
| 150x75x10 | 17.0 | 150.0 | 75.0 | 10.0 | 11.0 | 5.5 | 21.6 |
| 150x75x9 | 15.4 | 150.0 | 75.0 | 9.0 | 12.0 | 6.0 | 19.6 |
| 135x65x10 | 15.0 | 135.0 | 65.0 | 10.0 | 11.0 | 5.5 | 19.1 |
| 135x65x8 | 12.2 | 135.0 | 65.0 | 8.0 | 11.0 | 5.5 | 15.5 |
| 125x75x12 | 17.8 | 125.0 | 75.0 | 12.0 | 11.0 | 5.5 | 22.7 |
| 125x75x10 | 15.0 | 125.0 | 75.0 | 10.0 | 11.0 | 5.5 | 19.1 |
| 125x75x8 | 12.2 | 125.0 | 75.0 | 8.0 | 11.0 | 5.5 | 15.5 |
| 120x80x12 | 17.8 | 120.0 | 80.0 | 12.0 | 11.0 | 5.5 | 22.7 |
| 120x80x10 | 15.0 | 120.0 | 80.0 | 10.0 | 11.0 | 5.5 | 19.1 |
| 120x80x8 | 12.2 | 120.0 | 80.0 | 8.0 | 11.0 | 5.5 | 15.5 |
| 100x75x12 | 15.4 | 100.0 | 75.0 | 12.0 | 10.0 | 5.0 | 19.7 |
| 100x75x10 | 13.0 | 100.0 | 75.0 | 10.0 | 10.0 | 5.0 | 16.6 |
| 100x75x8 | 10.6 | 100.0 | 75.0 | 8.0 | 10.0 | 5.0 | 13.5 |
| 100x65x10 | 12.3 | 100.0 | 65.0 | 10.0 | 10.0 | 5.0 | 15.6 |
| 100x65x8 | 9.94 | 100.0 | 65.0 | 8.0 | 10.0 | 5.0 | 12.7 |
| 100x65x7 | 8.77 | 100.0 | 65.0 | 7.0 | 10.0 | 5.0 | 11.2 |
| 100x50x8 | 8.97 | 100.0 | 50.0 | 8.0 | 8.0 | 4.0 | 11.4 |
| 100x50x6 | 6.84 | 100.0 | 50.0 | 6.0 | 8.0 | 4.0 | 8.71 |
| 80x60x7 | 7.36 | 80.0 | 60.0 | 7.0 | 8.0 | 4.0 | 9.38 |
| 80x40x8 | 7.07 | 80.0 | 40.0 | 8.0 | 7.0 | 3.5 | 9.01 |
| 80x40x6 | 5.41 | 80.0 | 40.0 | 6.0 | 7.0 | 3.5 | 6.89 |
| 75x50x8 | 7.39 | 75.0 | 50.0 | 8.0 | 7.0 | 3.5 | 9.41 |
| 75x50x6 | 5.65 | 75.0 | 50.0 | 6.0 | 7.0 | 3.5 | 7.19 |
| 70x50x6 | 5.41 | 70.0 | 50.0 | 6.0 | 7.0 | 3.5 | 6.89 |
| 65x50x5 | 4.35 | 65.0 | 50.0 | 5.0 | 6.0 | 3.0 | 5.54 |
| 60x40x6 | 4.46 | 60.0 | 40.0 | 6.0 | 6.0 | 3.0 | 5.68 |
| 60x40x5 | 3.76 | 60.0 | 40.0 | 5.0 | 6.0 | 3.0 | 4.79 |
| 60x30x5 | 3.37 | 60.0 | 30.0 | 5.0 | 6.0 | 3.0 | 4.29 |
| 50x30x5 | 2.96 | 50.0 | 30.0 | 5.0 | 5.0 | 2.5 | 3.78 |
| 45x30x4 | 2.25 | 45.0 | 30.0 | 4.0 | 4.5 | 2.25 | 2.86 |
| 40x25x4 | 1.93 | 40.0 | 25.0 | 4.0 | 4.0 | 2.0 | 2.46 |
| 40x20x4 | 1.77 | 40.0 | 20.0 | 4.0 | 4.0 | 2.0 | 2.26 |
| 30x20x4 | 1.46 | 30.0 | 20.0 | 4.0 | 4.0 | 2.0 | 1.86 |
| 30x20x3 | 1.12 | 30.0 | 20.0 | 3.0 | 4.0 | 2.0 | 1.43 |
Where the files are
Other publishers' files are linked, not hosted. "verify" = check the license at the link before commercial use.
| Roymech | Unequal leg angles to EN 10056-1: size, r1, r2, mass, area | web | Publisher's page; dimensions are facts |
Free files
★ Free files 17 parts. Generated by Xem Studio from the standard; threads are plain cylinders at major diameter. CC BY 4.0. index.json
Use this part in your AI. Your AI gets the exact sizes and files straight from Xem and can design a mount, case or adapter around it. Direct downloads here are limited to one file every 10 minutes; through your AI they are unlimited.
Connect Xem to your AI (free, no account, about a minute)
https://xemstudio.com/mcp- Claude: Add to Claude
- ChatGPT (Plus or higher): open Connectors → Advanced → turn on Developer mode → Create → paste the address, no authentication → Create.
- Cursor: install with one click. VS Code: install with one click.
| l-30x20x3-100mm | L 30 x 20 x 3: legs 30 and 20 mm, thickness 3 mm, root radius r1 4 mm, toe radius r2 2 mm, 100 mm long | STEP · STL |
| l-40x20x4-100mm | L 40 x 20 x 4: legs 40 and 20 mm, thickness 4 mm, root radius r1 4 mm, toe radius r2 2 mm, 100 mm long | STEP · STL |
| l-40x25x4-100mm | L 40 x 25 x 4: legs 40 and 25 mm, thickness 4 mm, root radius r1 4 mm, toe radius r2 2 mm, 100 mm long | STEP · STL |
| l-50x30x5-100mm | L 50 x 30 x 5: legs 50 and 30 mm, thickness 5 mm, root radius r1 5 mm, toe radius r2 2.5 mm, 100 mm long | STEP · STL |
| l-60x30x5-100mm | L 60 x 30 x 5: legs 60 and 30 mm, thickness 5 mm, root radius r1 6 mm, toe radius r2 3 mm, 100 mm long | STEP · STL |
| l-60x40x5-100mm | L 60 x 40 x 5: legs 60 and 40 mm, thickness 5 mm, root radius r1 6 mm, toe radius r2 3 mm, 100 mm long | STEP · STL |
| l-65x50x5-100mm | L 65 x 50 x 5: legs 65 and 50 mm, thickness 5 mm, root radius r1 6 mm, toe radius r2 3 mm, 100 mm long | STEP · STL |
| l-75x50x6-100mm | L 75 x 50 x 6: legs 75 and 50 mm, thickness 6 mm, root radius r1 7 mm, toe radius r2 3.5 mm, 100 mm long | STEP · STL |
| l-80x40x6-100mm | L 80 x 40 x 6: legs 80 and 40 mm, thickness 6 mm, root radius r1 7 mm, toe radius r2 3.5 mm, 100 mm long | STEP · STL |
| l-100x50x8-100mm | L 100 x 50 x 8: legs 100 and 50 mm, thickness 8 mm, root radius r1 8 mm, toe radius r2 4 mm, 100 mm long | STEP · STL |
| l-100x65x8-100mm | L 100 x 65 x 8: legs 100 and 65 mm, thickness 8 mm, root radius r1 10 mm, toe radius r2 5 mm, 100 mm long | STEP · STL |
| l-100x75x8-100mm | L 100 x 75 x 8: legs 100 and 75 mm, thickness 8 mm, root radius r1 10 mm, toe radius r2 5 mm, 100 mm long | STEP · STL |
| l-120x80x10-100mm | L 120 x 80 x 10: legs 120 and 80 mm, thickness 10 mm, root radius r1 11 mm, toe radius r2 5.5 mm, 100 mm long | STEP · STL |
| l-150x75x10-100mm | L 150 x 75 x 10: legs 150 and 75 mm, thickness 10 mm, root radius r1 11 mm, toe radius r2 5.5 mm, 100 mm long | STEP · STL |
| l-150x100x10-100mm | L 150 x 100 x 10: legs 150 and 100 mm, thickness 10 mm, root radius r1 12 mm, toe radius r2 6 mm, 100 mm long | STEP · STL |
| l-200x100x12-100mm | L 200 x 100 x 12: legs 200 and 100 mm, thickness 12 mm, root radius r1 15 mm, toe radius r2 7.5 mm, 100 mm long | STEP · STL |
| l-200x150x15-100mm | L 200 x 150 x 15: legs 200 and 150 mm, thickness 15 mm, root radius r1 15 mm, toe radius r2 7.5 mm, 100 mm long | STEP · STL |
https://xemstudio.com/mcp to Claude, ChatGPT, Cursor or any MCP client (free, no account, one minute) and it can look up exact sizes, mating fits and free STEP/STL from every chat.Plain text: sheet.txt · JSON: /api/geometry?object=en-10056-unequal-angles

Fits with


Questions
What is the toe radius of L 100x50x8?
r2 is printed in the EN 10056-1 table; see the table on this page.