Library › Hardware › Framing ·
Steel angles L (AISC): L4x4x1/4, L3x3x1/4, L2x2x1/4, L5x3x1/4 dimensions + STEP/STL
What are the dimensions of an L4x4x1/4 steel angle? · Standard part · basis: AISC Shapes Database (v15.0 values): d, b, t, k for every equal and unequal angle
Also called: l4x4x1/4, l 4 x 4 x 1/4, l4x4x1/4 dimensions, l2x2x1/4, l2x2x1/4 dimensions, l3x3x1/4, l3x3x3/8, l5x3x1/4, l6x4x1/2, l6x6x1/2, l8x8x1/2, l3-1/2x3-1/2x1/4, angle iron dimensions, steel angle dimensions, angle iron step file, equal angle dimensions, unequal angle dimensions, angle iron sizes
Exact dimensions. True size, with no tolerance added.
- length
- 101.6 mm
Notes
- Single angles L(long leg) x (short leg) x thickness: L4x4x1/4 has two 4 in legs 1/4 in thick, L5x3-1/2x3/8 a 5 in leg and a 3-1/2 in leg. The long leg is d and the short leg b in the AISC database; both legs have the same thickness t.
- The thickness is taken from the designation (the database prints it rounded to two decimals). The root fillet is not printed: it is derived from the printed k (back of the leg to the toe of the fillet), r = k - t. The toe radius is not printed either, so toes are square.
- The files put the heel at the origin: the long leg runs along +y, the short leg along +z. 4 in (101.6 mm) long. Drawn area is within 4 % of the printed area on all of them.
- 31 of the 137 sizes (equal and unequal) have files; all sizes are in the table.
Steel angles L (AISC): L4x4x1/4, L3x3x1/4, L2x2x1/4, L5x3x1/4… size chart
| shape | lb/ft | long leg (in) | short leg (in) | t (in) | k (in) | long leg (mm) | short leg (mm) | t (mm) |
|---|---|---|---|---|---|---|---|---|
| L12x12x1-3/8 | 105.0 | 12.0 | 12.0 | 1.375 | 2.09 | 304.8 | 304.8 | 34.92 |
| L12x12x1-1/4 | 96.4 | 12.0 | 12.0 | 1.25 | 1.96 | 304.8 | 304.8 | 31.75 |
| L12x12x1-1/8 | 87.2 | 12.0 | 12.0 | 1.125 | 1.84 | 304.8 | 304.8 | 28.57 |
| L12x12x1 | 77.8 | 12.0 | 12.0 | 1.0 | 1.71 | 304.8 | 304.8 | 25.4 |
| L10x10x1-3/8 | 87.1 | 10.0 | 10.0 | 1.375 | 2.18 | 254.0 | 254.0 | 34.92 |
| L10x10x1-1/4 | 79.9 | 10.0 | 10.0 | 1.25 | 2.05 | 254.0 | 254.0 | 31.75 |
| L10x10x1-1/8 | 72.3 | 10.0 | 10.0 | 1.125 | 1.93 | 254.0 | 254.0 | 28.57 |
| L10x10x1 | 64.7 | 10.0 | 10.0 | 1.0 | 1.8 | 254.0 | 254.0 | 25.4 |
| L10x10x7/8 | 56.9 | 10.0 | 10.0 | 0.875 | 1.68 | 254.0 | 254.0 | 22.22 |
| L10x10x3/4 | 49.1 | 10.0 | 10.0 | 0.75 | 1.55 | 254.0 | 254.0 | 19.05 |
| L8x8x1-1/8 | 56.9 | 8.0 | 8.0 | 1.125 | 1.75 | 203.2 | 203.2 | 28.57 |
| L8x8x1 | 51.0 | 8.0 | 8.0 | 1.0 | 1.63 | 203.2 | 203.2 | 25.4 |
| L8x8x7/8 | 45.0 | 8.0 | 8.0 | 0.875 | 1.5 | 203.2 | 203.2 | 22.22 |
| L8x8x3/4 | 38.9 | 8.0 | 8.0 | 0.75 | 1.38 | 203.2 | 203.2 | 19.05 |
| L8x8x5/8 | 32.7 | 8.0 | 8.0 | 0.625 | 1.25 | 203.2 | 203.2 | 15.88 |
| L8x8x9/16 | 29.6 | 8.0 | 8.0 | 0.5625 | 1.19 | 203.2 | 203.2 | 14.29 |
| L8x8x1/2 | 26.4 | 8.0 | 8.0 | 0.5 | 1.13 | 203.2 | 203.2 | 12.7 |
| L8x6x1 | 44.2 | 6.0 | 8.0 | 1.0 | 1.5 | 152.4 | 203.2 | 25.4 |
| L8x6x7/8 | 39.1 | 6.0 | 8.0 | 0.875 | 1.38 | 152.4 | 203.2 | 22.22 |
| L8x6x3/4 | 33.8 | 6.0 | 8.0 | 0.75 | 1.25 | 152.4 | 203.2 | 19.05 |
| L8x6x5/8 | 28.5 | 6.0 | 8.0 | 0.625 | 1.13 | 152.4 | 203.2 | 15.88 |
| L8x6x9/16 | 25.7 | 6.0 | 8.0 | 0.5625 | 1.06 | 152.4 | 203.2 | 14.29 |
| L8x6x1/2 | 23.0 | 6.0 | 8.0 | 0.5 | 1.0 | 152.4 | 203.2 | 12.7 |
| L8x6x7/16 | 20.2 | 6.0 | 8.0 | 0.4375 | 0.938 | 152.4 | 203.2 | 11.11 |
| L8x4x1 | 37.4 | 4.0 | 8.0 | 1.0 | 1.5 | 101.6 | 203.2 | 25.4 |
| L8x4x7/8 | 33.1 | 4.0 | 8.0 | 0.875 | 1.38 | 101.6 | 203.2 | 22.22 |
| L8x4x3/4 | 28.7 | 4.0 | 8.0 | 0.75 | 1.25 | 101.6 | 203.2 | 19.05 |
| L8x4x5/8 | 24.2 | 4.0 | 8.0 | 0.625 | 1.13 | 101.6 | 203.2 | 15.88 |
| L8x4x9/16 | 21.9 | 4.0 | 8.0 | 0.5625 | 1.06 | 101.6 | 203.2 | 14.29 |
| L8x4x1/2 | 19.6 | 4.0 | 8.0 | 0.5 | 1.0 | 101.6 | 203.2 | 12.7 |
| L8x4x7/16 | 17.2 | 4.0 | 8.0 | 0.4375 | 0.938 | 101.6 | 203.2 | 11.11 |
| L7x4x3/4 | 26.2 | 4.0 | 7.0 | 0.75 | 1.25 | 101.6 | 177.8 | 19.05 |
| L7x4x5/8 | 22.1 | 4.0 | 7.0 | 0.625 | 1.13 | 101.6 | 177.8 | 15.88 |
| L7x4x1/2 | 17.9 | 4.0 | 7.0 | 0.5 | 1.0 | 101.6 | 177.8 | 12.7 |
| L7x4x7/16 | 15.7 | 4.0 | 7.0 | 0.4375 | 0.938 | 101.6 | 177.8 | 11.11 |
| L7x4x3/8 | 13.6 | 4.0 | 7.0 | 0.375 | 0.875 | 101.6 | 177.8 | 9.52 |
| L6x6x1 | 37.4 | 6.0 | 6.0 | 1.0 | 1.5 | 152.4 | 152.4 | 25.4 |
| L6x6x7/8 | 33.1 | 6.0 | 6.0 | 0.875 | 1.38 | 152.4 | 152.4 | 22.22 |
| L6x6x3/4 | 28.7 | 6.0 | 6.0 | 0.75 | 1.25 | 152.4 | 152.4 | 19.05 |
| L6x6x5/8 | 24.2 | 6.0 | 6.0 | 0.625 | 1.13 | 152.4 | 152.4 | 15.88 |
| L6x6x9/16 | 21.9 | 6.0 | 6.0 | 0.5625 | 1.06 | 152.4 | 152.4 | 14.29 |
| L6x6x1/2 | 19.6 | 6.0 | 6.0 | 0.5 | 1.0 | 152.4 | 152.4 | 12.7 |
| L6x6x7/16 | 17.2 | 6.0 | 6.0 | 0.4375 | 0.938 | 152.4 | 152.4 | 11.11 |
| L6x6x3/8 | 14.9 | 6.0 | 6.0 | 0.375 | 0.875 | 152.4 | 152.4 | 9.52 |
| L6x6x5/16 | 12.4 | 6.0 | 6.0 | 0.3125 | 0.813 | 152.4 | 152.4 | 7.94 |
| L6x4x7/8 | 27.2 | 4.0 | 6.0 | 0.875 | 1.38 | 101.6 | 152.4 | 22.22 |
| L6x4x3/4 | 23.6 | 4.0 | 6.0 | 0.75 | 1.25 | 101.6 | 152.4 | 19.05 |
| L6x4x5/8 | 20.0 | 4.0 | 6.0 | 0.625 | 1.13 | 101.6 | 152.4 | 15.88 |
| L6x4x9/16 | 18.1 | 4.0 | 6.0 | 0.5625 | 1.06 | 101.6 | 152.4 | 14.29 |
| L6x4x1/2 | 16.2 | 4.0 | 6.0 | 0.5 | 1.0 | 101.6 | 152.4 | 12.7 |
| L6x4x7/16 | 14.3 | 4.0 | 6.0 | 0.4375 | 0.938 | 101.6 | 152.4 | 11.11 |
| L6x4x3/8 | 12.3 | 4.0 | 6.0 | 0.375 | 0.875 | 101.6 | 152.4 | 9.52 |
| L6x4x5/16 | 10.3 | 4.0 | 6.0 | 0.3125 | 0.813 | 101.6 | 152.4 | 7.94 |
| L6x3-1/2x1/2 | 15.3 | 3.5 | 6.0 | 0.5 | 1.0 | 88.9 | 152.4 | 12.7 |
| L6x3-1/2x3/8 | 11.7 | 3.5 | 6.0 | 0.375 | 0.875 | 88.9 | 152.4 | 9.52 |
| L6x3-1/2x5/16 | 9.8 | 3.5 | 6.0 | 0.3125 | 0.813 | 88.9 | 152.4 | 7.94 |
| L5x5x7/8 | 27.2 | 5.0 | 5.0 | 0.875 | 1.38 | 127.0 | 127.0 | 22.22 |
| L5x5x3/4 | 23.6 | 5.0 | 5.0 | 0.75 | 1.25 | 127.0 | 127.0 | 19.05 |
| L5x5x5/8 | 20.0 | 5.0 | 5.0 | 0.625 | 1.13 | 127.0 | 127.0 | 15.88 |
| L5x5x1/2 | 16.2 | 5.0 | 5.0 | 0.5 | 1.0 | 127.0 | 127.0 | 12.7 |
| L5x5x7/16 | 14.3 | 5.0 | 5.0 | 0.4375 | 0.938 | 127.0 | 127.0 | 11.11 |
| L5x5x3/8 | 12.3 | 5.0 | 5.0 | 0.375 | 0.875 | 127.0 | 127.0 | 9.52 |
| L5x5x5/16 | 10.3 | 5.0 | 5.0 | 0.3125 | 0.813 | 127.0 | 127.0 | 7.94 |
| L5x3-1/2x3/4 | 19.8 | 3.5 | 5.0 | 0.75 | 1.19 | 88.9 | 127.0 | 19.05 |
| L5x3-1/2x5/8 | 16.8 | 3.5 | 5.0 | 0.625 | 1.06 | 88.9 | 127.0 | 15.88 |
| L5x3-1/2x1/2 | 13.6 | 3.5 | 5.0 | 0.5 | 0.938 | 88.9 | 127.0 | 12.7 |
| L5x3-1/2x3/8 | 10.4 | 3.5 | 5.0 | 0.375 | 0.813 | 88.9 | 127.0 | 9.52 |
| L5x3-1/2x5/16 | 8.7 | 3.5 | 5.0 | 0.3125 | 0.75 | 88.9 | 127.0 | 7.94 |
| L5x3-1/2x1/4 | 7.0 | 3.5 | 5.0 | 0.25 | 0.688 | 88.9 | 127.0 | 6.35 |
| L5x3x1/2 | 12.8 | 3.0 | 5.0 | 0.5 | 0.938 | 76.2 | 127.0 | 12.7 |
| L5x3x7/16 | 11.3 | 3.0 | 5.0 | 0.4375 | 0.875 | 76.2 | 127.0 | 11.11 |
| L5x3x3/8 | 9.8 | 3.0 | 5.0 | 0.375 | 0.813 | 76.2 | 127.0 | 9.52 |
| L5x3x5/16 | 8.2 | 3.0 | 5.0 | 0.3125 | 0.75 | 76.2 | 127.0 | 7.94 |
| L5x3x1/4 | 6.6 | 3.0 | 5.0 | 0.25 | 0.688 | 76.2 | 127.0 | 6.35 |
| L4x4x3/4 | 18.5 | 4.0 | 4.0 | 0.75 | 1.13 | 101.6 | 101.6 | 19.05 |
| L4x4x5/8 | 15.7 | 4.0 | 4.0 | 0.625 | 1.0 | 101.6 | 101.6 | 15.88 |
| L4x4x1/2 | 12.8 | 4.0 | 4.0 | 0.5 | 0.875 | 101.6 | 101.6 | 12.7 |
| L4x4x7/16 | 11.3 | 4.0 | 4.0 | 0.4375 | 0.813 | 101.6 | 101.6 | 11.11 |
| L4x4x3/8 | 9.8 | 4.0 | 4.0 | 0.375 | 0.75 | 101.6 | 101.6 | 9.52 |
| L4x4x5/16 | 8.2 | 4.0 | 4.0 | 0.3125 | 0.688 | 101.6 | 101.6 | 7.94 |
| L4x4x1/4 | 6.6 | 4.0 | 4.0 | 0.25 | 0.625 | 101.6 | 101.6 | 6.35 |
| L4x3-1/2x1/2 | 11.9 | 3.5 | 4.0 | 0.5 | 0.875 | 88.9 | 101.6 | 12.7 |
| L4x3-1/2x3/8 | 9.1 | 3.5 | 4.0 | 0.375 | 0.75 | 88.9 | 101.6 | 9.52 |
| L4x3-1/2x5/16 | 7.7 | 3.5 | 4.0 | 0.3125 | 0.688 | 88.9 | 101.6 | 7.94 |
| L4x3-1/2x1/4 | 6.2 | 3.5 | 4.0 | 0.25 | 0.625 | 88.9 | 101.6 | 6.35 |
| L4x3x5/8 | 13.6 | 3.0 | 4.0 | 0.625 | 1.0 | 76.2 | 101.6 | 15.88 |
| L4x3x1/2 | 11.1 | 3.0 | 4.0 | 0.5 | 0.875 | 76.2 | 101.6 | 12.7 |
| L4x3x3/8 | 8.5 | 3.0 | 4.0 | 0.375 | 0.75 | 76.2 | 101.6 | 9.52 |
| L4x3x5/16 | 7.2 | 3.0 | 4.0 | 0.3125 | 0.688 | 76.2 | 101.6 | 7.94 |
| L4x3x1/4 | 5.8 | 3.0 | 4.0 | 0.25 | 0.625 | 76.2 | 101.6 | 6.35 |
| L3-1/2x3-1/2x1/2 | 11.1 | 3.5 | 3.5 | 0.5 | 0.875 | 88.9 | 88.9 | 12.7 |
| L3-1/2x3-1/2x7/16 | 9.8 | 3.5 | 3.5 | 0.4375 | 0.813 | 88.9 | 88.9 | 11.11 |
| L3-1/2x3-1/2x3/8 | 8.5 | 3.5 | 3.5 | 0.375 | 0.75 | 88.9 | 88.9 | 9.52 |
| L3-1/2x3-1/2x5/16 | 7.2 | 3.5 | 3.5 | 0.3125 | 0.688 | 88.9 | 88.9 | 7.94 |
| L3-1/2x3-1/2x1/4 | 5.8 | 3.5 | 3.5 | 0.25 | 0.625 | 88.9 | 88.9 | 6.35 |
| L3-1/2x3x1/2 | 10.2 | 3.0 | 3.5 | 0.5 | 0.875 | 76.2 | 88.9 | 12.7 |
| L3-1/2x3x7/16 | 9.1 | 3.0 | 3.5 | 0.4375 | 0.813 | 76.2 | 88.9 | 11.11 |
| L3-1/2x3x3/8 | 7.9 | 3.0 | 3.5 | 0.375 | 0.75 | 76.2 | 88.9 | 9.52 |
| L3-1/2x3x5/16 | 6.6 | 3.0 | 3.5 | 0.3125 | 0.688 | 76.2 | 88.9 | 7.94 |
| L3-1/2x3x1/4 | 5.4 | 3.0 | 3.5 | 0.25 | 0.625 | 76.2 | 88.9 | 6.35 |
| L3-1/2x2-1/2x1/2 | 9.4 | 2.5 | 3.5 | 0.5 | 0.875 | 63.5 | 88.9 | 12.7 |
| L3-1/2x2-1/2x3/8 | 7.2 | 2.5 | 3.5 | 0.375 | 0.75 | 63.5 | 88.9 | 9.52 |
| L3-1/2x2-1/2x5/16 | 6.1 | 2.5 | 3.5 | 0.3125 | 0.688 | 63.5 | 88.9 | 7.94 |
| L3-1/2x2-1/2x1/4 | 4.9 | 2.5 | 3.5 | 0.25 | 0.625 | 63.5 | 88.9 | 6.35 |
| L3x3x1/2 | 9.4 | 3.0 | 3.0 | 0.5 | 0.875 | 76.2 | 76.2 | 12.7 |
| L3x3x7/16 | 8.3 | 3.0 | 3.0 | 0.4375 | 0.813 | 76.2 | 76.2 | 11.11 |
| L3x3x3/8 | 7.2 | 3.0 | 3.0 | 0.375 | 0.75 | 76.2 | 76.2 | 9.52 |
| L3x3x5/16 | 6.1 | 3.0 | 3.0 | 0.3125 | 0.688 | 76.2 | 76.2 | 7.94 |
| L3x3x1/4 | 4.9 | 3.0 | 3.0 | 0.25 | 0.625 | 76.2 | 76.2 | 6.35 |
| L3x3x3/16 | 3.71 | 3.0 | 3.0 | 0.1875 | 0.563 | 76.2 | 76.2 | 4.76 |
| L3x2-1/2x1/2 | 8.5 | 2.5 | 3.0 | 0.5 | 0.875 | 63.5 | 76.2 | 12.7 |
| L3x2-1/2x7/16 | 7.6 | 2.5 | 3.0 | 0.4375 | 0.813 | 63.5 | 76.2 | 11.11 |
| L3x2-1/2x3/8 | 6.6 | 2.5 | 3.0 | 0.375 | 0.75 | 63.5 | 76.2 | 9.52 |
| L3x2-1/2x5/16 | 5.6 | 2.5 | 3.0 | 0.3125 | 0.688 | 63.5 | 76.2 | 7.94 |
| L3x2-1/2x1/4 | 4.5 | 2.5 | 3.0 | 0.25 | 0.625 | 63.5 | 76.2 | 6.35 |
| L3x2-1/2x3/16 | 3.39 | 2.5 | 3.0 | 0.1875 | 0.563 | 63.5 | 76.2 | 4.76 |
| L3x2x1/2 | 7.7 | 2.0 | 3.0 | 0.5 | 0.813 | 50.8 | 76.2 | 12.7 |
| L3x2x3/8 | 5.9 | 2.0 | 3.0 | 0.375 | 0.688 | 50.8 | 76.2 | 9.52 |
| L3x2x5/16 | 5.0 | 2.0 | 3.0 | 0.3125 | 0.625 | 50.8 | 76.2 | 7.94 |
| L3x2x1/4 | 4.1 | 2.0 | 3.0 | 0.25 | 0.563 | 50.8 | 76.2 | 6.35 |
| L3x2x3/16 | 3.07 | 2.0 | 3.0 | 0.1875 | 0.5 | 50.8 | 76.2 | 4.76 |
| L2-1/2x2-1/2x1/2 | 7.7 | 2.5 | 2.5 | 0.5 | 0.75 | 63.5 | 63.5 | 12.7 |
| L2-1/2x2-1/2x3/8 | 5.9 | 2.5 | 2.5 | 0.375 | 0.625 | 63.5 | 63.5 | 9.52 |
| L2-1/2x2-1/2x5/16 | 5.0 | 2.5 | 2.5 | 0.3125 | 0.563 | 63.5 | 63.5 | 7.94 |
| L2-1/2x2-1/2x1/4 | 4.1 | 2.5 | 2.5 | 0.25 | 0.5 | 63.5 | 63.5 | 6.35 |
| L2-1/2x2-1/2x3/16 | 3.07 | 2.5 | 2.5 | 0.1875 | 0.438 | 63.5 | 63.5 | 4.76 |
| L2-1/2x2x3/8 | 5.3 | 2.0 | 2.5 | 0.375 | 0.625 | 50.8 | 63.5 | 9.52 |
| L2-1/2x2x5/16 | 4.5 | 2.0 | 2.5 | 0.3125 | 0.563 | 50.8 | 63.5 | 7.94 |
| L2-1/2x2x1/4 | 3.62 | 2.0 | 2.5 | 0.25 | 0.5 | 50.8 | 63.5 | 6.35 |
| L2-1/2x2x3/16 | 2.75 | 2.0 | 2.5 | 0.1875 | 0.438 | 50.8 | 63.5 | 4.76 |
| L2-1/2x1-1/2x1/4 | 3.19 | 1.5 | 2.5 | 0.25 | 0.5 | 38.1 | 63.5 | 6.35 |
| L2-1/2x1-1/2x3/16 | 2.44 | 1.5 | 2.5 | 0.1875 | 0.438 | 38.1 | 63.5 | 4.76 |
| L2x2x3/8 | 4.7 | 2.0 | 2.0 | 0.375 | 0.625 | 50.8 | 50.8 | 9.52 |
| L2x2x5/16 | 3.92 | 2.0 | 2.0 | 0.3125 | 0.563 | 50.8 | 50.8 | 7.94 |
| L2x2x1/4 | 3.19 | 2.0 | 2.0 | 0.25 | 0.5 | 50.8 | 50.8 | 6.35 |
| L2x2x3/16 | 2.44 | 2.0 | 2.0 | 0.1875 | 0.438 | 50.8 | 50.8 | 4.76 |
| L2x2x1/8 | 1.65 | 2.0 | 2.0 | 0.125 | 0.375 | 50.8 | 50.8 | 3.17 |
Where the files are
Other publishers' files are linked, not hosted. "verify" = check the license at the link before commercial use.
| AISC (values via the ambaker1/aisc-csv extract, MIT) | AISC Shapes Database v15.0 (W, S, C, MC, L, HSS): d, bf, tw, tf, k, t, HSS Ht, B, OD, tnom, tdes, A, weight | web | AISC publishes the database free of charge; dimensions are facts. aisc.org itself was not reachable from the build box |
| AISC | Shapes Database (free download, v16.0 on aisc.org) - the values here are the v15.0 release; check the current release before relying on a size | web | Publisher's page; dimensions are facts |
Free files
★ Free files 31 parts. Generated by Xem Studio from the standard; threads are plain cylinders at major diameter. CC BY 4.0. index.json
Use this part in your AI. Your AI gets the exact sizes and files straight from Xem and can design a mount, case or adapter around it. Direct downloads here are limited to one file every 10 minutes; through your AI they are unlimited.
Connect Xem to your AI (free, no account, about a minute)
https://xemstudio.com/mcp- Claude: Add to Claude
- ChatGPT (Plus or higher): open Connectors → Advanced → turn on Developer mode → Create → paste the address, no authentication → Create.
- Cursor: install with one click. VS Code: install with one click.
| l2x2x3-16-4in | L2 x 2 x 3/16 angle: legs 2.0 x 2.0 in (50.8 x 50.8 mm), thickness 3/16 in (4.76 mm), root fillet 6.36 mm (k - t), square toes, 4 in long | STEP · STL |
| l2x2x1-4-4in | L2 x 2 x 1/4 angle: legs 2.0 x 2.0 in (50.8 x 50.8 mm), thickness 1/4 in (6.35 mm), root fillet 6.35 mm (k - t), square toes, 4 in long | STEP · STL |
| l2x2x3-8-4in | L2 x 2 x 3/8 angle: legs 2.0 x 2.0 in (50.8 x 50.8 mm), thickness 3/8 in (9.52 mm), root fillet 6.35 mm (k - t), square toes, 4 in long | STEP · STL |
| l2-1-2x2-1-2x1-4-4in | L2-1/2 x 2-1/2 x 1/4 angle: legs 2.5 x 2.5 in (63.5 x 63.5 mm), thickness 1/4 in (6.35 mm), root fillet 6.35 mm (k - t), square toes, 4 in long | STEP · STL |
| l3x3x1-4-4in | L3 x 3 x 1/4 angle: legs 3.0 x 3.0 in (76.2 x 76.2 mm), thickness 1/4 in (6.35 mm), root fillet 9.52 mm (k - t), square toes, 4 in long | STEP · STL |
| l3x3x3-8-4in | L3 x 3 x 3/8 angle: legs 3.0 x 3.0 in (76.2 x 76.2 mm), thickness 3/8 in (9.52 mm), root fillet 9.52 mm (k - t), square toes, 4 in long | STEP · STL |
| l3x3x1-2-4in | L3 x 3 x 1/2 angle: legs 3.0 x 3.0 in (76.2 x 76.2 mm), thickness 1/2 in (12.70 mm), root fillet 9.52 mm (k - t), square toes, 4 in long | STEP · STL |
| l3-1-2x3-1-2x1-4-4in | L3-1/2 x 3-1/2 x 1/4 angle: legs 3.5 x 3.5 in (88.9 x 88.9 mm), thickness 1/4 in (6.35 mm), root fillet 9.52 mm (k - t), square toes, 4 in long | STEP · STL |
| l4x4x1-4-4in | L4 x 4 x 1/4 angle: legs 4.0 x 4.0 in (101.6 x 101.6 mm), thickness 1/4 in (6.35 mm), root fillet 9.52 mm (k - t), square toes, 4 in long | STEP · STL |
| l4x4x3-8-4in | L4 x 4 x 3/8 angle: legs 4.0 x 4.0 in (101.6 x 101.6 mm), thickness 3/8 in (9.52 mm), root fillet 9.52 mm (k - t), square toes, 4 in long | STEP · STL |
| l4x4x1-2-4in | L4 x 4 x 1/2 angle: legs 4.0 x 4.0 in (101.6 x 101.6 mm), thickness 1/2 in (12.70 mm), root fillet 9.52 mm (k - t), square toes, 4 in long | STEP · STL |
| l5x5x3-8-4in | L5 x 5 x 3/8 angle: legs 5.0 x 5.0 in (127.0 x 127.0 mm), thickness 3/8 in (9.52 mm), root fillet 12.70 mm (k - t), square toes, 4 in long | STEP · STL |
| l5x5x1-2-4in | L5 x 5 x 1/2 angle: legs 5.0 x 5.0 in (127.0 x 127.0 mm), thickness 1/2 in (12.70 mm), root fillet 12.70 mm (k - t), square toes, 4 in long | STEP · STL |
| l6x6x3-8-4in | L6 x 6 x 3/8 angle: legs 6.0 x 6.0 in (152.4 x 152.4 mm), thickness 3/8 in (9.52 mm), root fillet 12.70 mm (k - t), square toes, 4 in long | STEP · STL |
| l6x6x1-2-4in | L6 x 6 x 1/2 angle: legs 6.0 x 6.0 in (152.4 x 152.4 mm), thickness 1/2 in (12.70 mm), root fillet 12.70 mm (k - t), square toes, 4 in long | STEP · STL |
| l6x6x3-4-4in | L6 x 6 x 3/4 angle: legs 6.0 x 6.0 in (152.4 x 152.4 mm), thickness 3/4 in (19.05 mm), root fillet 12.70 mm (k - t), square toes, 4 in long | STEP · STL |
| l8x8x1-2-4in | L8 x 8 x 1/2 angle: legs 8.0 x 8.0 in (203.2 x 203.2 mm), thickness 1/2 in (12.70 mm), root fillet 16.00 mm (k - t), square toes, 4 in long | STEP · STL |
| l8x8x1-4in | L8 x 8 x 1 angle: legs 8.0 x 8.0 in (203.2 x 203.2 mm), thickness 1 in (25.40 mm), root fillet 16.00 mm (k - t), square toes, 4 in long | STEP · STL |
| l3x2x1-4-4in | L3 x 2 x 1/4 angle: legs 2.0 x 3.0 in (50.8 x 76.2 mm), thickness 1/4 in (6.35 mm), root fillet 7.95 mm (k - t), square toes, 4 in long | STEP · STL |
| l3x2x3-8-4in | L3 x 2 x 3/8 angle: legs 2.0 x 3.0 in (50.8 x 76.2 mm), thickness 3/8 in (9.52 mm), root fillet 7.95 mm (k - t), square toes, 4 in long | STEP · STL |
| l3-1-2x2-1-2x1-4-4in | L3-1/2 x 2-1/2 x 1/4 angle: legs 2.5 x 3.5 in (63.5 x 88.9 mm), thickness 1/4 in (6.35 mm), root fillet 9.52 mm (k - t), square toes, 4 in long | STEP · STL |
| l3-1-2x3x1-4-4in | L3-1/2 x 3 x 1/4 angle: legs 3.0 x 3.5 in (76.2 x 88.9 mm), thickness 1/4 in (6.35 mm), root fillet 9.52 mm (k - t), square toes, 4 in long | STEP · STL |
| l4x3x1-4-4in | L4 x 3 x 1/4 angle: legs 3.0 x 4.0 in (76.2 x 101.6 mm), thickness 1/4 in (6.35 mm), root fillet 9.52 mm (k - t), square toes, 4 in long | STEP · STL |
| l4x3x3-8-4in | L4 x 3 x 3/8 angle: legs 3.0 x 4.0 in (76.2 x 101.6 mm), thickness 3/8 in (9.52 mm), root fillet 9.52 mm (k - t), square toes, 4 in long | STEP · STL |
| l5x3x1-4-4in | L5 x 3 x 1/4 angle: legs 3.0 x 5.0 in (76.2 x 127.0 mm), thickness 1/4 in (6.35 mm), root fillet 11.13 mm (k - t), square toes, 4 in long | STEP · STL |
| l5x3-1-2x3-8-4in | L5 x 3-1/2 x 3/8 angle: legs 3.5 x 5.0 in (88.9 x 127.0 mm), thickness 3/8 in (9.52 mm), root fillet 11.13 mm (k - t), square toes, 4 in long | STEP · STL |
| l6x4x3-8-4in | L6 x 4 x 3/8 angle: legs 4.0 x 6.0 in (101.6 x 152.4 mm), thickness 3/8 in (9.52 mm), root fillet 12.70 mm (k - t), square toes, 4 in long | STEP · STL |
| l6x4x1-2-4in | L6 x 4 x 1/2 angle: legs 4.0 x 6.0 in (101.6 x 152.4 mm), thickness 1/2 in (12.70 mm), root fillet 12.70 mm (k - t), square toes, 4 in long | STEP · STL |
| l7x4x1-2-4in | L7 x 4 x 1/2 angle: legs 4.0 x 7.0 in (101.6 x 177.8 mm), thickness 1/2 in (12.70 mm), root fillet 12.70 mm (k - t), square toes, 4 in long | STEP · STL |
| l8x4x1-2-4in | L8 x 4 x 1/2 angle: legs 4.0 x 8.0 in (101.6 x 203.2 mm), thickness 1/2 in (12.70 mm), root fillet 12.70 mm (k - t), square toes, 4 in long | STEP · STL |
| l8x6x1-2-4in | L8 x 6 x 1/2 angle: legs 6.0 x 8.0 in (152.4 x 203.2 mm), thickness 1/2 in (12.70 mm), root fillet 12.70 mm (k - t), square toes, 4 in long | STEP · STL |
https://xemstudio.com/mcp to Claude, ChatGPT, Cursor or any MCP client (free, no account, one minute) and it can look up exact sizes, mating fits and free STEP/STL from every chat.Plain text: sheet.txt · JSON: /api/geometry?object=aisc-l-angles

Fits with




Questions
What are the legs of an L4x4x1/4?
Two 4 in (101.6 mm) legs, 1/4 in (6.35 mm) thick.
What is k on an angle?
The distance from the back of the angle to the toe of the root fillet.