Library › Mechanisms › Belt and friction drives ·

Flat belt 10 × 1.5 for two conoid pulleys at 110 mm (loop drawn at 20 mm along)

How does a belt sit on a cone? · Modern device · basis: Xem Studio design following Brown's figure (1868); true size, no printing allowance

Also called: flat belt, cone belt, correa plana, Flachriemen

Exact dimensions. True size, with no tolerance added.

length
157.05 mm
width
59.0 mm
height
10.44 mm

Notes

  • 10 × 1.5 mm belt drawn 20 mm along the cones (Ø27.9 and Ø51.9), each section lying flat on the curved surface it touches; the strands twist between the two tilts. Inside length 346.65 mm.
  • Xem Studio design following Brown's figure; true size, no printing allowance (apply your own to the mating features).

Flat belt 10 × 1.5 for two conoid pulleys at 110 mm size chart

dimensionvalue
width × thickness10 × 1.5 mm
inside length346.65 mm

Where the files are

Other publishers' files are linked, not hosted. "verify" = check the license at the link before commercial use.

Henry T. Brown (1868, public domain)Five Hundred and Seven Mechanical Movements — scan on archive.orgwebPublisher's page; dimensions are facts
507movements.comBrown's movement No. 10: figure, his text and an animationwebPublisher's page; dimensions are facts
Xem StudiodrawingwebPublisher's page; dimensions are facts

Free files

★ Free files 1 parts. Xem Studio design: free to use, print and sell things from; not to be republished as files. Xem Studio Design License. index.json

Use this part in your AI. Your AI gets the exact sizes and files straight from Xem and can design a mount, case or adapter around it. Direct downloads here are limited to one file every 10 minutes; through your AI they are unlimited.

Connect Xem to your AI (free, no account, about a minute)
https://xemstudio.com/mcp
  1. Claude: Add to Claude
  2. ChatGPT (Plus or higher): open Connectors → Advanced → turn on Developer mode → Create → paste the address, no authentication → Create.
  3. Cursor: install with one click. VS Code: install with one click.
Other apps and full steps
flat-belt-10x1-5-conoid-pulleys-c110belt loop at z = 20STEP · STL
Let your AI pull this. Add https://xemstudio.com/mcp to Claude, ChatGPT, Cursor or any MCP client (free, no account, one minute) and it can look up exact sizes, mating fits and free STEP/STL from every chat.
Set it up →

Plain text: sheet.txt · JSON: /api/geometry?object=flat-belt-10x1-5-conoid-pulleys-c110

Flat belt 10 × 1.5 for two conoid pulleys at 110 mm (loop drawn at 20 mm along), isometric render of a generated part
Render of flat-belt-10x1-5-conoid-pulleys-c110 from the free STEP; not to scale.

Fits with

Questions

How does a belt sit on a cone?

10 × 1.5 mm belt drawn 20 mm along the cones (Ø27.9 and Ø51.9), each section lying flat on the curved surface it touches; the strands twist between the two tilts. Inside length 346.65 mm.