Library › Mechanisms › Linkages ·

Gauge cheek 12 × 40 × 16 with a 12 × 6 channel for the bar and Ø3 link pivot

What is a gauge cheek? · Modern device · basis: Xem Studio design following Brown's figure (1868); true size, no printing allowance

Also called: gauge cheek, centre finder cheek, mordaza de gramil, Anschlagbacke

Exact dimensions. True size, with no tolerance added.

length
12.0 mm
width
40.0 mm
height
16.0 mm

Notes

  • 12 × 40 × 16 block with a 12 × 6 mm channel across it (it sits on, or slides along, the cross-bar line-on-line), a Ø3 link-pivot hole at its centre through the top and a Ø3.2 cross hole for a thumb screw. Its 40 mm faces are the cheeks that bear on the sides of the work.
  • Xem Studio design following Brown's figure; true size, no printing allowance (apply your own to the mating features).

Gauge cheek 12 × 40 × 16 with a 12 × 6 channel for the bar and Ø3… size chart

dimensionvalue
cheek12 × 40 × 16 mm
channel12 × 6 mm (the bar)
pivot holeØ3 at the centre
screw holeØ3.2

Where the files are

Other publishers' files are linked, not hosted. "verify" = check the license at the link before commercial use.

Henry T. Brown (1868, public domain)Five Hundred and Seven Mechanical Movements — scan on archive.orgwebPublisher's page; dimensions are facts
507movements.comBrown's movement No. 410: figure, his text and an animationwebPublisher's page; dimensions are facts
Xem StudiodrawingwebPublisher's page; dimensions are facts

Free files

★ Free files 1 parts. Xem Studio design: free to use, print and sell things from; not to be republished as files. Xem Studio Design License. index.json

Use this part in your AI. Your AI gets the exact sizes and files straight from Xem and can design a mount, case or adapter around it. Direct downloads here are limited to one file every 10 minutes; through your AI they are unlimited.

Connect Xem to your AI (free, no account, about a minute)
https://xemstudio.com/mcp
  1. Claude: Add to Claude
  2. ChatGPT (Plus or higher): open Connectors → Advanced → turn on Developer mode → Create → paste the address, no authentication → Create.
  3. Cursor: install with one click. VS Code: install with one click.
Other apps and full steps
gauge-cheek-12x40x16-ch12x6cheek, z 0..16, bar channel z 5..11 along XSTEP · STL
Let your AI pull this. Add https://xemstudio.com/mcp to Claude, ChatGPT, Cursor or any MCP client (free, no account, one minute) and it can look up exact sizes, mating fits and free STEP/STL from every chat.
Set it up →

Plain text: sheet.txt · JSON: /api/geometry?object=gauge-cheek-12x40x16-ch12x6

Gauge cheek 12 × 40 × 16 with a 12 × 6 channel for the bar and Ø3 link pivot, isometric render of a generated part
Render of gauge-cheek-12x40x16-ch12x6 from the free STEP; not to scale.

Fits with

Questions

What is a gauge cheek?

12 × 40 × 16 block with a 12 × 6 mm channel across it (it sits on, or slides along, the cross-bar line-on-line), a Ø3 link-pivot hole at its centre through the top and a Ø3.2 cross hole for a thumb screw. Its 40 mm faces are the cheeks that bear on the sides of the work.