Library › Hardware › Gears, cranks & flywheels ·

210 T gear and 2208 motor bracket, 14 : 1

What gear and bracket drive a 2208 motor at 14 to 1? · Hardware · basis: Module 1, 20° involute (ISO 53) as the site's spur gears; the catalog's 15 T pinion, its 2208 adaptor and the 2208 envelope

Also called: stirling generator gearing, 210 tooth module 1 gear

Long Earth Society build part. Parts of the HTD engines. Long Earth Society

Exact dimensions. Every file is drawn at true size with no tolerance added. The holes and pins that meet another part are listed below under Mating features, with the fit each joint needs; open those by your process's clearance before making the part. Mating features

sizes
2 in table

Notes

  • 210 : 15 = 14 : 1 at 112.5 centre distance: at 150 rpm the 2208 (KV 128, 14.4 Ω, published) turns 2100 rpm and makes 16.4 V open circuit.
  • The bracket bolts to the seal cap's outer face with three M4; the motor's base takes four M3 countersunk screws from the bracket's back.

210 T gear and 2208 motor bracket, 14 : 1 size chart

partteethtip (mm)ratio
gear-m1-210t-b12210212.014.0
motor-bracket-2208-3in

Mating features

Drawn at the exact size. Open press, slide, run and socket features by your process's clearance (tolerances by process); leave designed gaps and clamp fits as drawn.

featureexactmates withfitfiles
gear boreØ12, M4 grubØ12 shaftslidegear-*
meshmodule 1, 210 : 15 at 112.5 centrespinion-m1-15t-b6designedgear-*
bracket holes3 × Ø4.5 on r 30; 4 × Ø3.4 countersunk 90° to Ø6shcs-m4x12; csk-m3x8 into the motor basedesignedmotor-bracket-*
shaft holeØ30shaft and seal (no contact)designedmotor-bracket-*

Where the files are

Other publishers' files are linked, not hosted. "verify" = check the license at the link before commercial use.

ISOISO 53 cylindrical gears, standard basic rack (20°, addendum 1 m, dedendum 1.25 m)standarddimensions are facts verify
T-Motor (maker's store page)GB2208 gimbal motor KV128: internal resistance 14.4 Ωwebmaker page; values are facts verify
Long Earth SocietyEngine buildsweb, videoLES site

Free files

★ Free files 2 parts. Xem Studio design: free to use, print and sell things from; not to be republished as files. Xem Studio Design License. index.json

Use this part in your AI. Your AI gets the exact sizes and files straight from Xem and can design a mount, case or adapter around it. Direct downloads here are limited to one file every 10 minutes; through your AI they are unlimited.

Connect Xem to your AI (free, no account, about a minute)
https://xemstudio.com/mcp
  1. Claude: Add to Claude
  2. ChatGPT (Plus or higher): open Connectors → Advanced → turn on Developer mode → Create → paste the address, no authentication → Create.
  3. Cursor: install with one click. VS Code: install with one click.
Other apps and full steps
gear-m1-210t-b12crank gear module 1, 210 teeth, 20° (tip Ø212), 10 wide, hub Ø30 × 15, Ø12 bore, M4 radial tapped holeSTEP · STL
motor-bracket-2208-3ingenerator bracket 5 thick: Ø76.2 disc on the seal cap (3 × M4 on r 30), arm to the motor 112.5 above the shaft, 2208 base holes countersunkSTEP · STL
Let your AI pull this. Add https://xemstudio.com/mcp to Claude, ChatGPT, Cursor or any MCP client (free, no account, one minute) and it can look up exact sizes, mating fits and free STEP/STL from every chat.
Set it up →

Plain text: sheet.txt · JSON: /api/geometry?object=gear-210t-2208-motor-bracket

210 T gear and 2208 motor bracket, 14 : 1, isometric render of a generated part
Render of motor-bracket-2208-3in from the free STEP; not to scale.

Fits with

Questions

Why gear up 14 : 1?

A slow engine turns a small generator too slowly to make useful voltage; 14 : 1 puts the 2208 near 2000 rpm.