Library › Phones, tablets & wearables › Other tablets & e-readers · 2024 ·

iPad Pro 11 (M4)

What are the iPad Pro 11 (M4) dimensions? · Modern device · basis: Apple accessory dimensional drawing (developer.apple.com/accessories); numbers transcribed, geometry built by Xem Studio

Also called: ipad pro 11 (m4) size, ipad pro 11 (m4) measurements

Exact dimensions. True size, with no tolerance added.

length
249.7 mm
width
177.51 mm
height
5.268 mm

Notes

  • From Apple's published dimensional drawing for iPad Pro 11-inch (M4): 177.51 × 249.7 × 5.268 mm. The body file is built from the drawing's own numbers (corner-profile points, edge profile, camera and port positions): hollow it for a case, or subtract it (plus the case-cutouts file) to make a pocket, dock, tray or mount.
  • Apple's notes for case makers: case thickness on the back 2.1 mm max; do not obstruct ports, cameras, flash or sensors; no metal contact; no magnets on the back except MagSafe.
  • Sizes are exact nominal millimetres, true size: add your own clearance (for a printed case, typically a few tenths of a mm all round).
  • iPad Pro 11 (M4): 249.7 × 177.5 × 5.3 mm (height × width × depth), 9.83 × 6.99 × 0.21 in, 444 g, 11 in display.
  • iPad Air 13 in (M2/M3): 280.6 × 214.9 × 6.1 mm, 617 g. iPad Air 11 in: 247.6 × 178.5 × 6.1 mm, 460 g. iPad (A16, 11th gen) and iPad (10th gen): 248.6 × 179.5 × 7.0 mm, 477 g. iPad mini (A17 Pro, 7th gen): 195.4 × 134.8 × 6.3 mm, 293 g.
  • All current iPads are USB-C with flat sides; the Smart Connector sits on the back (Pro/Air) or the edge (10th/11th gen). Stand design: the centre of mass is near the geometric centre; 10° tilt needs 25 mm of lip.
  • Compare with the rest of the family on the iPad Pro (M4), iPad Air (M3), iPad (A16), iPad mini (A17 Pro) sheet.

iPad Pro 11 size chart

parametervalue
width × length × thickness177.51 × 249.7 × 5.268 mm
display active area160.13 × 232.32 mm
corner profile points (x from side, y from top)(0, 14.56); (1.66, 7.54); (7.54, 1.66); (12.82, 0); (14.62, 0)
back glass to rear camera glass1.95 mm
camera plateau (from the back-view datum corner)x 7.55–33.44, y 7.55–33.44 mm
rear camera 1 centre(14.03, 14.03) mm, Ø10.83
rear camera 2 centre(14.03, 26.05) mm, Ø8.41
flash centre(26.82, 20.04) mm, Ø6.7
USB-C connector keep-out12.45 × 6.6 mm
volume up (right)from 19.33 mm below the top, 10.06 long
volume down (right)from 31.39 mm below the top, 10.06 long

Where the files are

Other publishers' files are linked, not hosted. "verify" = check the license at the link before commercial use.

Apple (official)iPad Pro (M4) tech specswebManufacturer spec page
Apple (official)iPad Air (M3) tech specswebManufacturer spec page
Apple (official)iPad mini (A17 Pro) tech specswebManufacturer spec page
Apple (official)Accessory Design Guidelines for Apple Devices (dimensioned drawings of every current device)PDFApple developer terms; drawings for accessory design
AppleiPad Pro 11-inch (M4) dimensional drawing (Accessory Design Guidelines)PDFApple's terms; linked, not hosted

Free files

★ Free files 2 parts. Generated by Xem Studio from the standard; threads are plain cylinders at major diameter. CC BY 4.0. index.json

Use this part in your AI. Your AI gets the exact sizes and files straight from Xem and can design a mount, case or adapter around it. Direct downloads here are limited to one file every 10 minutes; through your AI they are unlimited.

Connect Xem to your AI (free, no account, about a minute)
https://xemstudio.com/mcp
  1. Claude: Add to Claude
  2. ChatGPT (Plus or higher): open Connectors → Advanced → turn on Developer mode → Create → paste the address, no authentication → Create.
  3. Cursor: install with one click. VS Code: install with one click.
Other apps and full steps
ipad-pro-11-m4-bodyiPad Pro 11-inch (M4) at true size: outline from Apple's corner-profile points, side profile, camera Sides drawn straight: the drawing does not dimension the edge profile.STEP · STL
ipad-pro-11-m4-case-cutoutsCase openings: port keep-out pushed 14 mm outward, camera plateau footprint through the back (subtract from your case)STEP · STL
Let your AI pull this. Add https://xemstudio.com/mcp to Claude, ChatGPT, Cursor or any MCP client (free, no account, one minute) and it can look up exact sizes, mating fits and free STEP/STL from every chat.
Set it up →

Plain text: sheet.txt · JSON: /api/geometry?object=ipad-pro-11-m4

iPad Pro 11 (M4), isometric render of a generated part
Render of ipad-pro-11-m4-body from the free STEP; not to scale.

Fits with

Questions

How big is the iPad Pro 11 (M4) in inches?

9.83 × 6.99 × 0.21 in (height × width × depth); 249.7 × 177.5 × 5.3 mm.

What are the iPad Pro 11 (M4) dimensions in mm?

249.7 × 177.5 × 5.3 mm, 444 g.