Library › Phones, tablets & wearables › Other tablets & e-readers · 2024 ·
iPad Pro 13 (M4)
What are the iPad Pro 13 (M4) dimensions? · Modern device · basis: Apple accessory dimensional drawing (developer.apple.com/accessories); numbers transcribed, geometry built by Xem Studio
Also called: ipad pro 13 (m4) size, ipad pro 13 (m4) measurements
Exact dimensions. True size, with no tolerance added.
- length
- 281.58 mm
- width
- 215.53 mm
- height
- 5.125 mm
Notes
- From Apple's published dimensional drawing for iPad Pro 13-inch (M4): 215.53 × 281.58 × 5.125 mm. The body file is built from the drawing's own numbers (corner-profile points, edge profile, camera and port positions): hollow it for a case, or subtract it (plus the case-cutouts file) to make a pocket, dock, tray or mount.
- Apple's notes for case makers: case thickness on the back 2.1 mm max; do not obstruct ports, cameras, flash or sensors; no metal contact; no magnets on the back except MagSafe.
- Sizes are exact nominal millimetres, true size: add your own clearance (for a printed case, typically a few tenths of a mm all round).
- iPad Pro 13 (M4): 281.6 × 215.5 × 5.1 mm (height × width × depth), 11.09 × 8.48 × 0.20 in, 579 g, 13 in display.
- iPad Air 13 in (M2/M3): 280.6 × 214.9 × 6.1 mm, 617 g. iPad Air 11 in: 247.6 × 178.5 × 6.1 mm, 460 g. iPad (A16, 11th gen) and iPad (10th gen): 248.6 × 179.5 × 7.0 mm, 477 g. iPad mini (A17 Pro, 7th gen): 195.4 × 134.8 × 6.3 mm, 293 g.
- All current iPads are USB-C with flat sides; the Smart Connector sits on the back (Pro/Air) or the edge (10th/11th gen). Stand design: the centre of mass is near the geometric centre; 10° tilt needs 25 mm of lip.
- Compare with the rest of the family on the iPad Pro (M4), iPad Air (M3), iPad (A16), iPad mini (A17 Pro) sheet.
iPad Pro 13 size chart
| parameter | value |
|---|---|
| width × length × thickness | 215.53 × 281.58 × 5.125 mm |
| display active area | 199.14 × 265.19 mm |
| corner profile points (x from side, y from top) | (0, 14.56); (1.66, 7.54); (7.54, 1.66); (12.82, 0); (14.62, 0) |
| back glass to rear camera glass | 2.19 mm |
| camera plateau (from the back-view datum corner) | x 7.55–33.44, y 7.55–33.44 mm |
| rear camera 1 centre | (14.03, 14.03) mm, Ø10.83 |
| rear camera 2 centre | (14.03, 26.05) mm, Ø8.41 |
| flash centre | (26.82, 20.04) mm, Ø6.7 |
| USB-C connector keep-out | 12.45 × 6.6 mm |
| volume up (right) | from 19.33 mm below the top, 10.06 long |
| volume down (right) | from 31.39 mm below the top, 10.06 long |
Where the files are
Other publishers' files are linked, not hosted. "verify" = check the license at the link before commercial use.
| Apple (official) | iPad Pro (M4) tech specs | web | Manufacturer spec page |
| Apple (official) | iPad Air (M3) tech specs | web | Manufacturer spec page |
| Apple (official) | iPad mini (A17 Pro) tech specs | web | Manufacturer spec page |
| Apple (official) | Accessory Design Guidelines for Apple Devices (dimensioned drawings of every current device) | Apple developer terms; drawings for accessory design | |
| Apple | iPad Pro 13-inch (M4) dimensional drawing (Accessory Design Guidelines) | Apple's terms; linked, not hosted |
Free files
★ Free files 2 parts. Generated by Xem Studio from the standard; threads are plain cylinders at major diameter. CC BY 4.0. index.json
Use this part in your AI. Your AI gets the exact sizes and files straight from Xem and can design a mount, case or adapter around it. Direct downloads here are limited to one file every 10 minutes; through your AI they are unlimited.
Connect Xem to your AI (free, no account, about a minute)
https://xemstudio.com/mcp- Claude: Add to Claude
- ChatGPT (Plus or higher): open Connectors → Advanced → turn on Developer mode → Create → paste the address, no authentication → Create.
- Cursor: install with one click. VS Code: install with one click.
| ipad-pro-13-m4-body | iPad Pro 13-inch (M4) at true size: outline from Apple's corner-profile points, side profile, camera Sides drawn straight: the drawing does not dimension the edge profile. | STEP · STL |
| ipad-pro-13-m4-case-cutouts | Case openings: port keep-out pushed 14 mm outward, camera plateau footprint through the back (subtract from your case) | STEP · STL |
https://xemstudio.com/mcp to Claude, ChatGPT, Cursor or any MCP client (free, no account, one minute) and it can look up exact sizes, mating fits and free STEP/STL from every chat.Plain text: sheet.txt · JSON: /api/geometry?object=ipad-pro-13-m4

Fits with
Questions
How big is the iPad Pro 13 (M4) in inches?
11.09 × 8.48 × 0.20 in (height × width × depth); 281.6 × 215.5 × 5.1 mm.
What are the iPad Pro 13 (M4) dimensions in mm?
281.6 × 215.5 × 5.1 mm, 579 g.


