Library › Phones, tablets & wearables › Other phones · 2025 ·

iPhone 17 Pro Max

What are the iPhone 17 Pro Max dimensions? · Modern device · basis: Apple accessory dimensional drawing (developer.apple.com/accessories); numbers transcribed, geometry built by Xem Studio

Also called: iphone 17 pro max size, iphone 17 pro max measurements

Exact dimensions. True size, with no tolerance added.

length
163.43 mm
width
77.98 mm
height
8.75 mm

Notes

  • From Apple's published dimensional drawing for iPhone 17 Pro Max: 77.98 × 163.43 × 8.75 mm. The body file is built from the drawing's own numbers (corner-profile points, edge profile, camera and port positions): hollow it for a case, or subtract it (plus the case-cutouts file) to make a pocket, dock, tray or mount.
  • The camera plateau (2.55 mm above the back glass) is not modelled: Apple's drawing gives its height but not its outline. Leave room for it.
  • Apple's notes for case makers: case thickness on the back 2.1 mm max; do not obstruct ports, cameras, flash or sensors; no metal contact; no magnets on the back except MagSafe.
  • Sizes are exact nominal millimetres, true size: add your own clearance (for a printed case, typically a few tenths of a mm all round).
  • iPhone 17 Pro Max: 163.4 × 78 × 8.75 mm (height × width × depth), 6.43 × 3.07 × 0.34 in, 233 g, 6.9 in display.
  • The 17 Pro / Pro Max camera plateau spans the full width of the back; the Air has a full-width bar near the top; 17 and 16e keep a corner island. Depth figures exclude the camera: add about 4 mm for the Pro plateau when sizing a pocket.
  • Case design: corner radius, Action button, Camera Control, USB-C and speaker positions are all in the Accessory Design Guidelines drawings; the overall numbers here are enough for a shelf, dock or holder with 0.5 mm clearance per side.
  • A measured Xem scan of each body is planned: exact plateau height and lens positions are what the published drawings leave to the accessory maker.
  • Compare with the rest of the family on the iPhone 17, iPhone Air, iPhone 17 Pro, 17 Pro Max, iPhone 16e (2025) sheet.

iPhone 17 Pro Max size chart

parametervalue
width × length × thickness77.98 × 163.43 × 8.75 mm
front glass75.58 × 161.03 mm
display active area72.86 × 158.31 mm
corner profile points (x from side, y from top)(0, 19.43); (0.04, 13.9); (0.92, 8.46); (3.8, 3.8); (8.46, 0.92); (13.9, 0.04); (19.43, 0)
back glass to camera plateau2.55 mm
rear camera 1 centre(14.37, 14.37) mm, Ø16.2
rear camera 2 centre(14.37, 33.61) mm, Ø16.2
rear camera 3 centre(32.36, 23.99) mm, Ø16.2
flash centre(64.16, 13.82) mm, Ø6.8
USB-C connector keep-out12.45 × 6.6 mm, R3.25, centred 38.99 mm from the left edge
action button (left)centred 34.28 mm below the top, ±3.45 mm, stands 0.45 proud
volume up (left)centred 48.43 mm below the top, ±5.6 mm, stands 0.45 proud
volume down (left)centred 62.63 mm below the top, ±5.6 mm, stands 0.45 proud
SIM tray (left)centred 127.6 mm below the top, ±8.05 mm
side button (right)centred 55.53 mm below the top, ±8.85 mm, stands 0.45 proud
camera control (right)centred 111.82 mm below the top, ±8.55 mm
case thickness on the back (max)2.1 mm

Where the files are

Other publishers' files are linked, not hosted. "verify" = check the license at the link before commercial use.

Apple (official)iPhone 17 tech specswebManufacturer spec page
Apple (official)iPhone 17 Pro tech specswebManufacturer spec page
Apple (official)iPhone Air tech specswebManufacturer spec page
Apple (official)Accessory Design Guidelines for Apple Devices (dimensioned drawings of every current device)PDFApple developer terms; drawings for accessory design
AppleiPhone 17 Pro Max dimensional drawing (Accessory Design Guidelines)PDFApple's terms; linked, not hosted

Free files

★ Free files 2 parts. Generated by Xem Studio from the standard; threads are plain cylinders at major diameter. CC BY 4.0. index.json

Use this part in your AI. Your AI gets the exact sizes and files straight from Xem and can design a mount, case or adapter around it. Direct downloads here are limited to one file every 10 minutes; through your AI they are unlimited.

Connect Xem to your AI (free, no account, about a minute)
https://xemstudio.com/mcp
  1. Claude: Add to Claude
  2. ChatGPT (Plus or higher): open Connectors → Advanced → turn on Developer mode → Create → paste the address, no authentication → Create.
  3. Cursor: install with one click. VS Code: install with one click.
Other apps and full steps
iphone-17-pro-max-bodyiPhone 17 Pro Max at true size: outline from Apple's corner-profile points, side profile, camera (camera plateau, 2.55 mm high, is NOT modelled: Apple's drawing does not dimension its outline, so allow for it) Sides drawn straight: the drawing does not dimension the edge profile.STEP · STL
iphone-17-pro-max-case-cutoutsCase openings: port keep-out pushed 14 mm outward, camera plateau footprint through the back (subtract from your case)STEP · STL
Let your AI pull this. Add https://xemstudio.com/mcp to Claude, ChatGPT, Cursor or any MCP client (free, no account, one minute) and it can look up exact sizes, mating fits and free STEP/STL from every chat.
Set it up →

Plain text: sheet.txt · JSON: /api/geometry?object=iphone-17-pro-max

iPhone 17 Pro Max, isometric render of a generated part
Render of iphone-17-pro-max-body from the free STEP; not to scale.

Fits with

Questions

How big is the iPhone 17 Pro Max in inches?

6.43 × 3.07 × 0.34 in (height × width × depth); 163.4 × 78 × 8.75 mm.

What are the iPhone 17 Pro Max dimensions in mm?

163.4 × 78 × 8.75 mm, 233 g.