Library › Phones, tablets & wearables › Other phones · 2025 ·

iPhone 16e

What are the iPhone 16e dimensions? · Modern device · basis: Apple accessory dimensional drawing (developer.apple.com/accessories); numbers transcribed, geometry built by Xem Studio

Also called: iphone 16e size, iphone 16e measurements

Exact dimensions. True size, with no tolerance added.

length
146.71 mm
width
71.52 mm
height
7.8 mm

Notes

  • From Apple's published dimensional drawing for iPhone 16e: 71.52 × 146.71 × 7.8 mm. The body file is built from the drawing's own numbers (corner-profile points, edge profile, camera and port positions): hollow it for a case, or subtract it (plus the case-cutouts file) to make a pocket, dock, tray or mount.
  • Apple's notes for case makers: case thickness on the back 2.1 mm max; do not obstruct ports, cameras, flash or sensors; no metal contact; no magnets on the back except MagSafe.
  • Sizes are exact nominal millimetres, true size: add your own clearance (for a printed case, typically a few tenths of a mm all round).
  • iPhone 16e: 146.7 × 71.5 × 7.8 mm (height × width × depth), 5.78 × 2.81 × 0.31 in, 167 g, 6.1 in display.
  • The 17 Pro / Pro Max camera plateau spans the full width of the back; the Air has a full-width bar near the top; 17 and 16e keep a corner island. Depth figures exclude the camera: add about 4 mm for the Pro plateau when sizing a pocket.
  • Case design: corner radius, Action button, Camera Control, USB-C and speaker positions are all in the Accessory Design Guidelines drawings; the overall numbers here are enough for a shelf, dock or holder with 0.5 mm clearance per side.
  • A measured Xem scan of each body is planned: exact plateau height and lens positions are what the published drawings leave to the accessory maker.
  • Compare with the rest of the family on the iPhone 17, iPhone Air, iPhone 17 Pro, 17 Pro Max, iPhone 16e (2025) sheet.

iPhone 16e size chart

parametervalue
width × length × thickness71.52 × 146.71 × 7.8 mm
front glass69.42 × 144.61 mm
display active area64.58 × 139.77 mm
corner profile points (x from side, y from top)(0, 16.14); (0, 11.63); (0.06, 7.2); (3.22, 3.4); (6.97, 0.95); (11.38, 0.07); (15.89, 0)
edge profile (z from mid-plane, inset)(3.82, 0.91); (3.79, 0.49); (3.54, 0.14); (3.14, 0.01); (2.71, 0)
back glass to rear camera glass1.68 mm
rear camera 1 centre(13.32, 13.32) mm, Ø14.97
flash centre(29.68, 13.32) mm, Ø3.75
USB-C connector keep-out12.45 × 6.6 mm, R3.25, centred 35.76 mm from the left edge
action button (left)centred 31.28 mm below the top, ±3.77 mm, stands 0.45 proud
volume up (left)centred 45.43 mm below the top, ±5.92 mm, stands 0.45 proud
volume down (left)centred 59.63 mm below the top, ±5.92 mm, stands 0.45 proud
SIM tray (left)centred 110.04 mm below the top, ±7.97 mm
side button (right)centred 52.53 mm below the top, ±9.17 mm, stands 0.45 proud
case thickness on the back (max)2.1 mm

Where the files are

Other publishers' files are linked, not hosted. "verify" = check the license at the link before commercial use.

Apple (official)iPhone 17 tech specswebManufacturer spec page
Apple (official)iPhone 17 Pro tech specswebManufacturer spec page
Apple (official)iPhone Air tech specswebManufacturer spec page
Apple (official)Accessory Design Guidelines for Apple Devices (dimensioned drawings of every current device)PDFApple developer terms; drawings for accessory design
AppleiPhone 16e dimensional drawing (Accessory Design Guidelines)PDFApple's terms; linked, not hosted

Free files

★ Free files 2 parts. Generated by Xem Studio from the standard; threads are plain cylinders at major diameter. CC BY 4.0. index.json

Use this part in your AI. Your AI gets the exact sizes and files straight from Xem and can design a mount, case or adapter around it. Direct downloads here are limited to one file every 10 minutes; through your AI they are unlimited.

Connect Xem to your AI (free, no account, about a minute)
https://xemstudio.com/mcp
  1. Claude: Add to Claude
  2. ChatGPT (Plus or higher): open Connectors → Advanced → turn on Developer mode → Create → paste the address, no authentication → Create.
  3. Cursor: install with one click. VS Code: install with one click.
Other apps and full steps
iphone-16e-bodyiPhone 16e at true size: outline from Apple's corner-profile points, side profile, cameraSTEP · STL
iphone-16e-case-cutoutsCase openings: port keep-out pushed 14 mm outward, camera plateau footprint through the back (subtract from your case)STEP · STL
Let your AI pull this. Add https://xemstudio.com/mcp to Claude, ChatGPT, Cursor or any MCP client (free, no account, one minute) and it can look up exact sizes, mating fits and free STEP/STL from every chat.
Set it up →

Plain text: sheet.txt · JSON: /api/geometry?object=iphone-16e

iPhone 16e, isometric render of a generated part
Render of iphone-16e-body from the free STEP; not to scale.

Fits with

Questions

How big is the iPhone 16e in inches?

5.78 × 2.81 × 0.31 in (height × width × depth); 146.7 × 71.5 × 7.8 mm.

What are the iPhone 16e dimensions in mm?

146.7 × 71.5 × 7.8 mm, 167 g.