Library › Car design › Suspension geometry ·

Front kick-up (RC)

What is kick-up on an RC car and what angle should I run? · Standard part · basis: Design rules and figures from the cited sources; example geometry by Xem Studio

Also called: kick up, kickup, rc kickup angle, front kick up, kick-up vs caster, 25 degree kickup, bulkhead angle, front hinge pin angle, chassis kick up, kickup bushing

Exact dimensions. True size, with no tolerance added.

sizes
4 in table

Notes

  • Kick-up is the side-view angle of the front inner hinge pins, pointing up toward the front (CompetitionX). It adds to caster and lets the front wheels roll over bumps.
  • More kick-up improves bump absorption and high-speed stability and gives smoother braking; less sharpens initial steering and front bite but feels nervous on rough tracks (CompetitionX; Adrenaline RC).
  • Most off-road buggies start around 25-30 deg and adjust in 2-5 deg steps (CompetitionX).
  • Used on: 1/10 off-road buggies.
  • The file is a reference example built by Xem Studio from the numbers above (Reference 1/10 off-road: track 250 mm and 90 mm wheel+tyre (EFRA maxima); wheelbase illustrative. kick-up modelled on the caster builder.). Sizes the sources do not fix are illustrative; scale the example to your own vehicle.

Front kick-up size chart

parametervalue or rangesource
Typical buggy kick-up25-30 degCompetitionX
Example values20, 25, 30 degCompetitionX
Adjustment stepabout 2-5 degCompetitionX
Kick-up in caster stack-up example11 degTekno setup guide

Where the files are

Other publishers' files are linked, not hosted. "verify" = check the license at the link before commercial use.

CompetitionXRC Kickup ExplainedwebPublisher's page; dimensions are facts
Adrenaline RC RacingMastering Caster & Kick-Up for Better Offroad RC Racing PerformancewebPublisher's page; dimensions are facts
Tekno RCTekno RC Setup GuidewebPublisher's page; dimensions are facts

Free files

★ Free files 1 parts. Xem Studio design: free to use, print and sell things from; not to be republished as files. Xem Studio Design License. index.json

Use this part in your AI. Your AI gets the exact sizes and files straight from Xem and can design a mount, case or adapter around it. Direct downloads here are limited to one file every 10 minutes; through your AI they are unlimited.

Connect Xem to your AI (free, no account, about a minute)
https://xemstudio.com/mcp
  1. Claude: Add to Claude
  2. ChatGPT (Plus or higher): open Connectors → Advanced → turn on Developer mode → Create → paste the address, no authentication → Create.
  3. Cursor: install with one click. VS Code: install with one click.
Other apps and full steps
kick-up-geometryCaster demo: steering axis tilted back 25°, wheelbase 260 mm, Ø90 tyres (illustrative layout)STEP · STL
Let your AI pull this. Add https://xemstudio.com/mcp to Claude, ChatGPT, Cursor or any MCP client (free, no account, one minute) and it can look up exact sizes, mating fits and free STEP/STL from every chat.
Set it up →

Plain text: sheet.txt · JSON: /api/geometry?object=kick-up

Front kick-up (RC), isometric render of a generated part
Render of kick-up-geometry from the free STEP; not to scale.

Fits with

Questions

Is kick-up the same as caster?

No, but they are linked: raising the front block or lowering the rear increases kick-up and often caster (Adrenaline RC).