Library › Car design › Suspension geometry ·

Rear toe-in

Why do RC cars run rear toe-in? · Standard part · basis: Design rules and figures from the cited sources; example geometry by Xem Studio

Also called: rear toe in, rear toe, rc rear toe in, rear hub toe, toe in degrees rear, rear toe out, rear toe stability, rear toe block, 3 degree rear toe, rear alignment rc

Exact dimensions. True size, with no tolerance added.

sizes
3 in table

Notes

  • Rear toe-in adds stability on power and under braking at a small cost in top speed (Tekno), and improves cornering stability on full-size cars (Wikipedia).
  • EuroRC gives 1-4 deg rear toe-in for RC cars and says never to run rear toe-out because it causes snap oversteer.
  • The file is a reference example built by Xem Studio from the numbers above (Reference 1/10 off-road: track 250 mm and 90 mm wheel+tyre (EFRA maxima); wheelbase illustrative.). Sizes the sources do not fix are illustrative; scale the example to your own vehicle.

Rear toe-in size chart

parametervalue or rangesource
RC rear toe-in1-4 degEuroRC set-up guide
Rear toe-outavoid (snap oversteer)EuroRC set-up guide
Effectmore on-power and braking stability, less top speedTekno setup guide

Where the files are

Other publishers' files are linked, not hosted. "verify" = check the license at the link before commercial use.

EuroRCShort set-up guidewebPublisher's page; dimensions are facts
Tekno RCTekno RC Setup GuidewebPublisher's page; dimensions are facts
WikipediaToe (automotive)webPublisher's page; dimensions are facts

Free files

★ Free files 1 parts. Xem Studio design: free to use, print and sell things from; not to be republished as files. Xem Studio Design License. index.json

Use this part in your AI. Your AI gets the exact sizes and files straight from Xem and can design a mount, case or adapter around it. Direct downloads here are limited to one file every 10 minutes; through your AI they are unlimited.

Connect Xem to your AI (free, no account, about a minute)
https://xemstudio.com/mcp
  1. Claude: Add to Claude
  2. ChatGPT (Plus or higher): open Connectors → Advanced → turn on Developer mode → Create → paste the address, no authentication → Create.
  3. Cursor: install with one click. VS Code: install with one click.
Other apps and full steps
toe-rear-geometryToe demo: front wheels toed 2.5° (illustrative layout)STEP · STL
Let your AI pull this. Add https://xemstudio.com/mcp to Claude, ChatGPT, Cursor or any MCP client (free, no account, one minute) and it can look up exact sizes, mating fits and free STEP/STL from every chat.
Set it up →

Plain text: sheet.txt · JSON: /api/geometry?object=toe-rear

Rear toe-in, isometric render of a generated part
Render of toe-rear-geometry from the free STEP; not to scale.

Fits with

Questions

Is rear toe-out ever used?

EuroRC advises never, because of snap oversteer.