Library › Mechanisms › Screws ·

Lead screw Tr10×2, 80 mm thread, Ø6 journals, Ø20 head with Ø6 cross hole

What is a Tr10×2 lead screw? · Modern device · basis: Xem Studio design following Brown's figure (1868); true size, no printing allowance

Also called: lead screw, trapezoidal screw, tr10x2, husillo de avance Tr10×2, Trapezgewindespindel Tr10×2

Exact dimensions. Every file is drawn at true size with no tolerance added. The holes and pins that meet another part are listed below under Mating features, with the fit each joint needs; open those by your process's clearance before making the part. Mating features

length
20.0 mm
width
20.0 mm
height
118.0 mm

Notes

  • Trapezoidal Tr10×2 (ISO 2904 basic profile, 30°, single start, right hand) screw, 80 mm of thread between two Ø6 × 14 journals, with a Ø20 × 10 head cross-drilled Ø6 for a tommy bar: 2 mm of travel per turn.
  • Minor Ø (basic) 8 mm; drawn with no allowance, so the nut-slide of the same page meshes line on line.
  • Xem Studio design following Brown's figure; true size, no printing allowance (apply your own to the mating features).

Lead screw Tr10×2, 80 mm thread, Ø6 journals, Ø20 head with Ø6 cross… size chart

dimensionvalue
threadTr10×2, right hand
thread length80 mm
journals2 × Ø6 × 14
headØ20 × 10, Ø6 cross hole
travel per turn2 mm

Mating features

Drawn at the exact size. Open press, slide, run and socket features by your process's clearance (tolerances by process); leave designed gaps and clamp fits as drawn.

featureexactmates withfitfiles
threadTr10×2 right hand, 80 mm; minor Ø8 (basic); 2 mm per turnTr10×2 internal thread of the nut-slide (exact complement)runlead-screw-tr10x2*
journals2 × Ø6 × 14Ø6 bores of the frame uprights (94 apart)runlead-screw-tr10x2*
headØ20 × 10, Ø6 cross holeØ6 tommy barslidelead-screw-tr10x2*

Where the files are

Other publishers' files are linked, not hosted. "verify" = check the license at the link before commercial use.

Henry T. Brown (1868, public domain)Five Hundred and Seven Mechanical Movements — scan on archive.orgwebPublisher's page; dimensions are facts
507movements.comBrown's movement No. 103: figure, his text and an animationwebPublisher's page; dimensions are facts
Xem StudiodrawingwebPublisher's page; dimensions are facts

Free files

★ Free files 1 parts. Xem Studio design: free to use, print and sell things from; not to be republished as files. Xem Studio Design License. index.json

Use this part in your AI. Your AI gets the exact sizes and files straight from Xem and can design a mount, case or adapter around it. Direct downloads here are limited to one file every 10 minutes; through your AI they are unlimited.

Connect Xem to your AI (free, no account, about a minute)
https://xemstudio.com/mcp
  1. Claude: Add to Claude
  2. ChatGPT (Plus or higher): open Connectors → Advanced → turn on Developer mode → Create → paste the address, no authentication → Create.
  3. Cursor: install with one click. VS Code: install with one click.
Other apps and full steps
lead-screw-tr10x2-l80screw, axis Z, thread z 0..80, journals z −14..0 and 80..94, head z 94..104STEP · STL
Let your AI pull this. Add https://xemstudio.com/mcp to Claude, ChatGPT, Cursor or any MCP client (free, no account, one minute) and it can look up exact sizes, mating fits and free STEP/STL from every chat.
Set it up →

Plain text: sheet.txt · JSON: /api/geometry?object=lead-screw-tr10x2-l80-journals-6

Lead screw Tr10×2, 80 mm thread, Ø6 journals, Ø20 head with Ø6 cross hole, isometric render of a generated part
Render of lead-screw-tr10x2-l80 from the free STEP; not to scale.

Fits with

Questions

What is a Tr10×2 lead screw?

Trapezoidal Tr10×2 (ISO 2904 basic profile, 30°, single start, right hand) screw, 80 mm of thread between two Ø6 × 14 journals, with a Ø20 × 10 head cross-drilled Ø6 for a tommy bar: 2 mm of travel per turn.