Library › Mechanisms › Linkages ·

Lewis side wedge 5 → 10 × 14 × 50, Ø6 pin hole

What are the side pieces of a lewis? · Modern device · basis: Xem Studio design following Brown's figure (1868); true size, no printing allowance

Also called: lewis wedge, lewis side piece, cuña lateral, Seitenkeil

Exact dimensions. True size, with no tolerance added.

length
10.0 mm
width
14.0 mm
height
50.0 mm

Notes

  • Wedge 14 mm thick and 50 high: 5 mm wide where it leaves the stone, widening to 10 mm at its foot over the lower 30 mm (the dovetail's slope, 5 in 30), parallel above; Ø6 cross hole 8 mm from the top. Two of them, mirrored, flank the centre piece.
  • Xem Studio design following Brown's figure; true size, no printing allowance (apply your own to the mating features).

Lewis side wedge 5 → 10 × 14 × 50, Ø6 pin hole size chart

dimensionvalue
wedge5 → 10 × 14 × 50 mm
taper5 mm over 30 mm
holeØ6

Where the files are

Other publishers' files are linked, not hosted. "verify" = check the license at the link before commercial use.

Henry T. Brown (1868, public domain)Five Hundred and Seven Mechanical Movements — scan on archive.orgwebPublisher's page; dimensions are facts
507movements.comBrown's movement No. 493: figure, his text and an animationwebPublisher's page; dimensions are facts
Xem StudiodrawingwebPublisher's page; dimensions are facts

Free files

★ Free files 1 parts. Xem Studio design: free to use, print and sell things from; not to be republished as files. Xem Studio Design License. index.json

Use this part in your AI. Your AI gets the exact sizes and files straight from Xem and can design a mount, case or adapter around it. Direct downloads here are limited to one file every 10 minutes; through your AI they are unlimited.

Connect Xem to your AI (free, no account, about a minute)
https://xemstudio.com/mcp
  1. Claude: Add to Claude
  2. ChatGPT (Plus or higher): open Connectors → Advanced → turn on Developer mode → Create → paste the address, no authentication → Create.
  3. Cursor: install with one click. VS Code: install with one click.
Other apps and full steps
lewis-side-wedge-5-10x14x50wedge, inner face at x = 5, z −30..20STEP · STL
Let your AI pull this. Add https://xemstudio.com/mcp to Claude, ChatGPT, Cursor or any MCP client (free, no account, one minute) and it can look up exact sizes, mating fits and free STEP/STL from every chat.
Set it up →

Plain text: sheet.txt · JSON: /api/geometry?object=lewis-side-wedge-5-10x14x50

Lewis side wedge 5 → 10 × 14 × 50, Ø6 pin hole, isometric render of a generated part
Render of lewis-side-wedge-5-10x14x50 from the free STEP; not to scale.

Fits with

Questions

What are the side pieces of a lewis?

Wedge 14 mm thick and 50 high: 5 mm wide where it leaves the stone, widening to 10 mm at its foot over the lower 30 mm (the dovetail's slope, 5 in 30), parallel above; Ø6 cross hole 8 mm from the top. Two of them, mirrored, flank the centre piece.