Library › Mechanisms › Linkages ·

Lifting tong arm 12 × 5: link hole 60 mm and foot 80 mm either side of the pivot

What is a lifting tong arm? · Modern device · basis: Xem Studio design following Brown's figure (1868); true size, no printing allowance

Also called: tong arm, lifting tong, brazo de tenaza, Zangenschenkel

Exact dimensions. True size, with no tolerance added.

length
153.81 mm
width
19.33 mm
height
5.0 mm

Notes

  • 12 × 5 flat arm with Ø3 holes for the link (60 mm from the pivot) and the crossing pivot, and at 80 mm beyond the pivot a 12 mm deep foot whose face is square to the load when the arms are crossed at ±22.02° on a 40 mm load. Two arms, one turned over, make the tongs.
  • Xem Studio design following Brown's figure; true size, no printing allowance (apply your own to the mating features).

Lifting tong arm 12 × 5: link hole 60 mm and foot 80 mm either side… size chart

dimensionvalue
arm140 mm between end holes, 12 × 5
holesØ3 at −60 and 0
footprojects 10 mm, 12 deep
arm angle±22.02° on a 40 mm load

Where the files are

Other publishers' files are linked, not hosted. "verify" = check the license at the link before commercial use.

Henry T. Brown (1868, public domain)Five Hundred and Seven Mechanical Movements — scan on archive.orgwebPublisher's page; dimensions are facts
507movements.comBrown's movement No. 494: figure, his text and an animationwebPublisher's page; dimensions are facts
Xem StudiodrawingwebPublisher's page; dimensions are facts

Free files

★ Free files 1 parts. Xem Studio design: free to use, print and sell things from; not to be republished as files. Xem Studio Design License. index.json

Use this part in your AI. Your AI gets the exact sizes and files straight from Xem and can design a mount, case or adapter around it. Direct downloads here are limited to one file every 10 minutes; through your AI they are unlimited.

Connect Xem to your AI (free, no account, about a minute)
https://xemstudio.com/mcp
  1. Claude: Add to Claude
  2. ChatGPT (Plus or higher): open Connectors → Advanced → turn on Developer mode → Create → paste the address, no authentication → Create.
  3. Cursor: install with one click. VS Code: install with one click.
Other apps and full steps
lifting-tong-arm-140-footarm, z 0..5, pivot at the origin, foot end on +XSTEP · STL
Let your AI pull this. Add https://xemstudio.com/mcp to Claude, ChatGPT, Cursor or any MCP client (free, no account, one minute) and it can look up exact sizes, mating fits and free STEP/STL from every chat.
Set it up →

Plain text: sheet.txt · JSON: /api/geometry?object=lifting-tong-arm-140-foot

Lifting tong arm 12 × 5: link hole 60 mm and foot 80 mm either side of the pivot, isometric render of a generated part
Render of lifting-tong-arm-140-foot from the free STEP; not to scale.

Fits with

Questions

What is a lifting tong arm?

12 × 5 flat arm with Ø3 holes for the link (60 mm from the pivot) and the crossing pivot, and at 80 mm beyond the pivot a 12 mm deep foot whose face is square to the load when the arms are crossed at ±22.02° on a 40 mm load. Two arms, one turned over, make the tongs.