Library › Mechanisms › Linkages ·

Pantograph arms, 200 and 100 mm (set of four)

What are pantograph arms? · Modern device · basis: Xem Studio drawing

Also called: pantograph arm, pantograph linkage parts

Exact dimensions. True size, with no tolerance added.

sizes
3 in table

Notes

  • Two 200 mm arms (holes at both ends and the middle) and two 100 mm arms: pinned as below, pivot, tracer and pen stay on one line and the pen moves twice as far as the tracer.

Pantograph arms, 200 and 100 mm size chart

dimensionvalue
long arms200 mm centres (×2)
short arms100 mm centres (×2)
holesØ3.2

Where the files are

Other publishers' files are linked, not hosted. "verify" = check the license at the link before commercial use.

Xem StudiodrawingwebPublisher's page; dimensions are facts

Free files

★ Free files 2 parts. Xem Studio design: free to use, print and sell things from; not to be republished as files. Xem Studio Design License. index.json

Use this part in your AI. Your AI gets the exact sizes and files straight from Xem and can design a mount, case or adapter around it. Direct downloads here are limited to one file every 10 minutes; through your AI they are unlimited.

Connect Xem to your AI (free, no account, about a minute)
https://xemstudio.com/mcp
  1. Claude: Add to Claude
  2. ChatGPT (Plus or higher): open Connectors → Advanced → turn on Developer mode → Create → paste the address, no authentication → Create.
  3. Cursor: install with one click. VS Code: install with one click.
Other apps and full steps
pantograph-arm-200200 mm armSTEP · STL
pantograph-arm-100100 mm armSTEP · STL
Let your AI pull this. Add https://xemstudio.com/mcp to Claude, ChatGPT, Cursor or any MCP client (free, no account, one minute) and it can look up exact sizes, mating fits and free STEP/STL from every chat.
Set it up →

Plain text: sheet.txt · JSON: /api/geometry?object=pantograph-arms-200-100

Pantograph arms, 200 and 100 mm (set of four), isometric render of a generated part
Render of pantograph-arm-100 from the free STEP; not to scale.

Fits with

Questions

What are pantograph arms?

Two 200 mm arms (holes at both ends and the middle) and two 100 mm arms: pinned as below, pivot, tracer and pen stay on one line and the pen moves twice as far as the tracer.