Library › 3D printable tri-clamp › Clamps & fittings ·
Printable tri-clamp (45°): NPT male, NPT female and hose-barb adapters
Can I 3D print a tri-clamp to hose barb or NPT adapter? · Hardware · basis: Xem Studio design: lengths A per the standard 21MP / 22MP / 14MPHR tables used on the standard adapter pages, 45° rims; threads not modelled (male: major Ø over L2; female: tap-drill bore)
Also called: printable tri clamp hose barb, 3d printed tri clamp npt adapter, 3d printed tri clamp, 3d printable tri clamp, tri clamp stl, printable tri clover
Exact dimensions. True size, with no tolerance added.
- sizes
- 28 in table
Notes
- 3D-printable tri-clamp: this is Xem Studio's print-friendly version of the standard sanitary fitting, drawn so it prints on an ordinary FDM or resin printer with no supports. Download the STL to print it, or the STEP to edit it. The files are true size (no printing allowance): add your own clearance in the slicer or CAD if your printer needs it.
- Print face down; the thread or barb end prints up.
- Printable tri-clamp: the ISO 2852 face and gasket groove are exactly standard, only the back cone behind each rim is 45° instead of 20°, so no rim overhangs more than 45° from vertical in any print orientation. Join these with the 45° clamps (printable-tri-clamp-clamps) and standard Type B gaskets; a 45° clamp fits only 45° rims, so keep a run all 45°. A 45° cone turns clamp force into face force at 1 : 1 (a 20° cone at 2.7 : 1), so tighten the clamp bolts harder or use M6.
- Print orientation: straight parts face down; elbows, tees and crosses with one face down; horizontal bores bridge their top, so keep them small or add a light tree support inside.
- Every clamp face is the ISO 2852 profile used across this site: 2.85 mm rim, flat face with the gasket groove (K 1.6 deep, R3 1.2 bottom, 23° walls, P2 0.8 edges) on C2, 20° back cone. Flange C3 / groove C2 / tube OD × wall, mm: ½–¾ in 25.0 / 20.4 (derived) / 12.7–19.05 × 1.65; 1–1½ in 50.5 / 43.5 / 25.4–38.1 × 1.65; 2 in 64.0 / 56.5 / 50.8 × 1.65; 2½ in 77.5 / 70.5 / 63.5 × 1.65; 3 in 91.0 / 83.5 / 76.2 × 1.65; 4 in 119.0 / 110.0 / 101.6 × 2.11; 6 in 166.9 (6.570 in) / 156.5 / 152.4 × 2.77; 8 in 217.7 (8.570 in) / 207.0 / 203.2 × 2.77; 10 in 268.5 / 261.0 / 254.0 × 3.40; 12 in 319.3 / 311.8 / 304.8 × 3.40.
Printable tri-clamp (45°): NPT male, NPT female and hose-barb adapters size chart
| clamp | end | A (in) |
|---|---|---|
| ½ | ¼ MNPT | 2.0 |
| ½ | ½ MNPT | 1.63 |
| ¾ | ¾ MNPT | 1.79 |
| 1 | ½ MNPT | 2.19 |
| 1 | 1 MNPT | 2.25 |
| 2 | 2 MNPT | 2.64 |
| 2½ | 2½ MNPT | 2.88 |
| 3 | 3 MNPT | 3.07 |
| 4 | 4 MNPT | 3.16 |
| ½ | ⅛ FNPT | 1.25 |
| ½ | ¼ FNPT | 1.5 |
| ¾ | ¼ FNPT | 1.5 |
| 1½ | 1½ FNPT | 2.25 |
| 2 | 2 FNPT | 2.34 |
| 3 | 3 FNPT | 2.19 |
| 4 | 4 FNPT | 2.63 |
| ½–¾ | 0.25 in barb | 1.5 |
| ½–¾ | 0.375 in barb | 1.5 |
| ½–¾ | 0.5 in barb | 1.5 |
| 1–1½ | 0.25 in barb | 1.5 |
| 1–1½ | 0.375 in barb | 1.5 |
| 1–1½ | 0.5 in barb | 1.5 |
| 1–1½ | 0.75 in barb | 1.5 |
| 1–1½ | 1 in barb | 1.687 |
| 2 | 0.5 in barb | 1.812 |
| 2 | 1.5 in barb | 2.312 |
| 3 | 3 in barb | 3.094 |
| 4 | 4 in barb | 3.406 |
Where the files are
Other publishers' files are linked, not hosted. "verify" = check the license at the link before commercial use.
| Dixon | Clamp × male NPT (T21MP) and clamp × female NPT (T22MP) adapters: A per size | publisher's catalogue; dimensions cited | |
| Steel & O'Brien | 14MPHR rubber hose adapter: A per clamp × barb size | web | publisher's table; dimensions cited |
| Dixon | 14MPHR brewery hose barb: A and barb OD B (hose ID + 0.040 in) per size, ½ to 6 in | publisher's catalogue; dimensions cited | |
| ASME | B1.20.1 Pipe threads, general purpose (NPT): major diameter, L2, tap drill; B16.11 forged fittings (Class 3000 couplings); B36.10 Sch 40 bore | standard | ASME; dimensions are facts verify |
| Rubber Fab | Tri-Clamp gasket dimensional chart: gasket ID, OD and bead diameter per size (2 in bead 2.22 in / 56.50 mm, 1.5 in 1.71 / 43.50, 3 in 3.29 / 83.50) | maker chart; dimensions are facts verify |
Free files
★ Free files 28 parts. Xem Studio design: free to use, print and sell things from; not to be republished as files. Xem Studio Design License. index.json
Use this part in your AI. Your AI gets the exact sizes and files straight from Xem and can design a mount, case or adapter around it. Direct downloads here are limited to one file every 10 minutes; through your AI they are unlimited.
Connect Xem to your AI (free, no account, about a minute)
https://xemstudio.com/mcp- Claude: Add to Claude
- ChatGPT (Plus or higher): open Connectors → Advanced → turn on Developer mode → Create → paste the address, no authentication → Create.
- Cursor: install with one click. VS Code: install with one click.
| male-npt-45cone-0.5in-x-1-4 | ½ in × ¼ MNPT | STEP · STL |
| male-npt-45cone-0.5in-x-1-2 | ½ in × ½ MNPT | STEP · STL |
| male-npt-45cone-0.75in-x-3-4 | ¾ in × ¾ MNPT | STEP · STL |
| male-npt-45cone-1in-x-1-2 | 1 in × ½ MNPT | STEP · STL |
| male-npt-45cone-1in-x-1 | 1 in × 1 MNPT | STEP · STL |
| male-npt-45cone-2in-x-2 | 2 in × 2 MNPT | STEP · STL |
| male-npt-45cone-2.5in-x-2-1-2 | 2½ in × 2½ MNPT | STEP · STL |
| male-npt-45cone-3in-x-3 | 3 in × 3 MNPT | STEP · STL |
| male-npt-45cone-4in-x-4 | 4 in × 4 MNPT | STEP · STL |
| female-npt-45cone-0.5in-x-1-8 | ½ in × ⅛ FNPT | STEP · STL |
| female-npt-45cone-0.5in-x-1-4 | ½ in × ¼ FNPT | STEP · STL |
| female-npt-45cone-0.75in-x-1-4 | ¾ in × ¼ FNPT | STEP · STL |
| female-npt-45cone-1.5in-x-1-1-2 | 1½ in × 1½ FNPT | STEP · STL |
| female-npt-45cone-2in-x-2 | 2 in × 2 FNPT | STEP · STL |
| female-npt-45cone-3in-x-3 | 3 in × 3 FNPT | STEP · STL |
| female-npt-45cone-4in-x-4 | 4 in × 4 FNPT | STEP · STL |
| hose-barb-45cone-0.75in-x-0.25in | ½–¾ in × 0.25 in hose barb | STEP · STL |
| hose-barb-45cone-0.75in-x-0.375in | ½–¾ in × 0.375 in hose barb | STEP · STL |
| hose-barb-45cone-0.75in-x-0.5in | ½–¾ in × 0.5 in hose barb | STEP · STL |
| hose-barb-45cone-1.5in-x-0.25in | 1–1½ in × 0.25 in hose barb | STEP · STL |
| hose-barb-45cone-1.5in-x-0.375in | 1–1½ in × 0.375 in hose barb | STEP · STL |
| hose-barb-45cone-1.5in-x-0.5in | 1–1½ in × 0.5 in hose barb | STEP · STL |
| hose-barb-45cone-1.5in-x-0.75in | 1–1½ in × 0.75 in hose barb | STEP · STL |
| hose-barb-45cone-1.5in-x-1in | 1–1½ in × 1 in hose barb | STEP · STL |
| hose-barb-45cone-2in-x-0.5in | 2 in × 0.5 in hose barb | STEP · STL |
| hose-barb-45cone-2in-x-1.5in | 2 in × 1.5 in hose barb | STEP · STL |
| hose-barb-45cone-3in-x-3in | 3 in × 3 in hose barb | STEP · STL |
| hose-barb-45cone-4in-x-4in | 4 in × 4 in hose barb | STEP · STL |
https://xemstudio.com/mcp to Claude, ChatGPT, Cursor or any MCP client (free, no account, one minute) and it can look up exact sizes, mating fits and free STEP/STL from every chat.Plain text: sheet.txt · JSON: /api/geometry?object=printable-tri-clamp-adapters

Fits with






Questions
Can I 3D print this?
Yes. It is the 3D-printable version: every overhang is 45° or steeper, so it prints without supports, and the sealing face is standard ISO 2852, so a normal gasket and clamp fit.
Threads?
Not modelled: chase or tap them after printing, or print with your slicer's thread modifier.