Library › RC planes › Brushless outrunner motors ·
RC plane outrunners (2212, 2216, 2826, 3508, 4110, 6374) and car inrunners (540 / 3650, 4274, 1/8 scale)
What are the dimensions of a 540 brushless motor? · Modern device · basis: Maker spec pages (Castle Creations, Hobbywing, SunnySky, iFlight, Flipsky); T-Motor via retailer copies (marked)
Also called: 540 brushless motor dimensions, 3650 motor size, 4274 motor dimensions, 2212 motor dimensions, rc car motor mount holes
Exact dimensions. True size, with no tolerance added.
- sizes
- 12 in table
Notes
- Car 540-class (36 mm can): Ø36 × about 52–53 mm, mounts with 2 × M3 on 25 mm (Castle states it). Shafts differ by model: 3.175 mm (Hobbywing 3650) or 5 mm (Castle 1410, XeRun 3652) — check yours.
- 1/8 scale: Hobbywing 4274 Ø42 × 74, 4268 Ø42 × 68, Ø5 shaft; Castle 1515 Ø40 (41.4 over fins) × 75.4 with 3 and 4 holes at 25 mm.
- Plane outrunners ship with a cross ('X') mount; its hole spacing appears only in maker drawings, so it is not listed. SunnySky X2212 Ø27.5 × 30 with a 3.175 shaft and 5 mm prop adapter.
- Robotics / e-skate 6374: Ø63.4 × 77 body, Ø8 shaft with a 3 × 1.5 key (Flipsky); mount screws M4, pattern not published.
- The 3650 and 4274 envelopes use the 2 × M3 on 25 pattern Castle publishes for 36 mm cans; Hobbywing does not state its pattern, so check before drilling.
RC plane outrunners (2212, 2216, 2826, 3508, 4110, 6374) and car… size chart
| motor | type | dia (mm) | length (mm) | shaft (mm) | mount | weight (g) |
|---|---|---|---|---|---|---|
| Castle 1410 (540 class) | car inrunner | 36 | 52.7 | 5 × 21 | 2 × M3 on 25 | 237 |
| Hobbywing QuicRun 3650 G2 | car inrunner | 36 | 52.8 | 3.175 | None | 190 |
| Hobbywing XeRun 3652 SD G2 | car inrunner | 36 | 52.5 / 56 | 5 × 15 | None | 192 |
| Hobbywing EZRun 4274 | 1/8 car | 42 | 74 | 5 | None | 418 |
| Hobbywing EZRun 4268 | 1/8 car | 42 | 68 | 5 | None | 343 |
| Castle 1515 | 1/8 car | 40 (41.4 fins) | 75.4 | 5 × 20 | 3 and 4 holes at 25 | None |
| SunnySky X2212 | plane outrunner | 27.5 | 30 | 3.175 | cross mount | 57 |
| SunnySky X2216 V3 | plane outrunner | 27.7 | 34 | None | cross mount | 68 |
| T-Motor AT2826 long shaft | plane outrunner | 35.2 | 69.5 | 5 | None | 175 |
| T-Motor MN3508 (retailer copy) | multirotor | 41.8 | 26.5 | 4 | None | 82 |
| SunnySky X4110S | outrunner | 48.2 | 30.5 | 4 | None | 149 |
| Flipsky 6374 | robotics / e-skate | 63.4 | 77 (102 overall) | 8 keyed | M4 | 860 |
Where the files are
Other publishers' files are linked, not hosted. "verify" = check the license at the link before commercial use.
| Castle Creations (spec via dealer) | 1410 3800 kV | web | Publisher's page; dimensions are facts |
| Hobbywing | QuicRun 3650 SD G2 | web | Publisher's page; dimensions are facts |
| Hobbywing | EZRun 4274 / 4268 | web | Publisher's page; dimensions are facts |
| Hobbywing Direct | XeRun 3652 SD G2 | web | Publisher's page; dimensions are facts |
| RC Visions (Castle spec) | Castle 1515 | web | Publisher's page; dimensions are facts |
| FlyingTech (SunnySky spec) | SunnySky X2212 | web | Publisher's page; dimensions are facts |
| BuddyRC (SunnySky spec) | SunnySky X2216 V3 | web | Publisher's page; dimensions are facts |
| LIGPOWER (T-Motor spec) | AT2826 long shaft | web | Publisher's page; dimensions are facts |
| GetFPV (T-Motor spec copy) | MN3508 | web | Publisher's page; dimensions are facts |
| ReadyMadeRC (SunnySky spec) | X4110S | web | Publisher's page; dimensions are facts |
Free files
★ Free files 5 parts. Generated by Xem Studio from the standard; threads are plain cylinders at major diameter. CC BY 4.0. index.json
Use this part in your AI. Your AI gets the exact sizes and files straight from Xem and can design a mount, case or adapter around it. Direct downloads here are limited to one file every 10 minutes; through your AI they are unlimited.
Connect Xem to your AI (free, no account, about a minute)
https://xemstudio.com/mcp- Claude: Add to Claude
- ChatGPT (Plus or higher): open Connectors → Advanced → turn on Developer mode → Create → paste the address, no authentication → Create.
- Cursor: install with one click. VS Code: install with one click.
| car-motor-36x52.7-castle-1410 | 36 mm car motor envelope (Castle 1410): Ø36 × 52.7, Ø5 × 21 shaft, 2 × M3 on 25 | STEP · STL |
| car-motor-36x52.8-3650 | 3650 car motor envelope: Ø36 × 52.8, Ø3.175 shaft (hole pattern assumed 2 × M3 on 25, see notes) | STEP · STL |
| car-motor-42x74-4274 | 4274 1/8 car motor envelope: Ø42 × 74, Ø5 shaft (hole pattern assumed 2 × M3 on 25, see notes) | STEP · STL |
| car-motor-plate-2xm3-25 | Car motor plate: 2 × M3 on 25 mm, slotted ±3 mm for gear mesh | STEP · STL |
| outrunner-2212-envelope | 2212 plane outrunner envelope (SunnySky X2212): Ø27.5 × 30, Ø3.175 shaft | STEP · STL |
https://xemstudio.com/mcp to Claude, ChatGPT, Cursor or any MCP client (free, no account, one minute) and it can look up exact sizes, mating fits and free STEP/STL from every chat.Plain text: sheet.txt · JSON: /api/geometry?object=rc-plane-and-car-motors

Fits with



Questions
What are 540 motor mounting holes?
2 × M3 on 25 mm (Castle 1410); the can is Ø36 mm.