Library › Drones › FPV motors ·
FPV drone motor sizes: 1104 to 3115, shaft, prop thread and mount patterns
What is the mounting pattern of a 2207 motor? · Modern device · basis: Maker spec pages (iFlight, EMAX, BrotherHobby, Hobbywing, GEPRC); T-Motor values via retailers copying its spec (marked)
Also called: 2207 motor mounting pattern, drone motor sizes, 16x16 motor mount, fpv motor dimensions, 2306 motor size
Exact dimensions. True size, with no tolerance added.
- sizes
- 12 in table
Notes
- Size code = stator diameter + height in mm (2207 = 22 mm × 7 mm stator); the can is bigger (a 2207 is about Ø29 × 32.6).
- Base mount patterns: 1104 / 1404 9 × 9 M2; 1806 (and iFlight's 2205) 12 × 12 M2; 2207 / 2306 / 2306.5 16 × 16 M3; 2806.5 / 2807 / 3110 / 3115 19 × 19 M3. Use screws no longer than the frame thickness + 3 mm or they hit the windings.
- Shafts: micro 1.5 mm; 22xx–31xx 5 mm with an M5 prop thread and flange nut (iFlight) — makers differ: EMAX RS2205 3 mm shaft with M5 thread, T-Motor F60 4 mm with a 5 mm prop mount.
- Mount-pattern hole diameters are given as φ2 (M2) and φ3 (M3); the motor-envelope files carry tapped-size holes 3 mm deep.
FPV drone motor sizes: 1104 to 3115, shaft, prop thread and mount… size chart
| size | example | can dia (mm) | length (mm) | shaft (mm) | mount | weight (g) |
|---|---|---|---|---|---|---|
| 1104 | T-Motor M1104 (retailer copy) | None | None | 1.5 | 9×9 | 5.6 |
| 1404 | iFlight XING2 | 19.9 | 18.4 | None | 9×9 M2 | 9.1 |
| 1806 | iFlight XING2 | 25.2 | 20.3 | 1.5 | 12×12 M2 | 20.2 |
| 2205 | iFlight XING2 | 28.3 | 29.55 | 5 | 12×12 | 25.2 |
| 2205 | EMAX RS2205 | 27.9 | 31.7 | 3 (M5 thread) | None | 30 |
| 2207 | iFlight XING2 | 29.08 | 32.6 | 5 | 16×16 M3 | 31.6 |
| 2207.5 | T-Motor F60 Pro V (retailer copy) | 26.8 | 31.7 | 4 (5 prop) | None | 33.3 |
| 2306 | iFlight XING2 | 30.0 | 32.2 | 5 | 16×16 M3 | 32.5 |
| 2806.5 | iFlight XING | 35.06 | 36.8 | 5 | 19×19 M3 | 53.3 |
| 2807 | T-Motor F90 (retailer copy) | 33.4 | 34.7 | 4 or 5 | None | 46.6 |
| 3110 | iFlight XING2 | 38.72 | 39.6 | 5 | 19×19 M3 | 76.4 |
| 3115 | GEPRC EM3115 | 37.5 | 30 | 5 | 19×19 | 115 |
Where the files are
Other publishers' files are linked, not hosted. "verify" = check the license at the link before commercial use.
| iFlight | XING2 1404 | web | Publisher's page; dimensions are facts |
| iFlight | XING2 1806 | web | Publisher's page; dimensions are facts |
| iFlight | XING2 2205 | web | Publisher's page; dimensions are facts |
| iFlight | XING2 2207 | web | Publisher's page; dimensions are facts |
| iFlight | XING2 2306 | web | Publisher's page; dimensions are facts |
| iFlight | XING 2806.5 | web | Publisher's page; dimensions are facts |
| iFlight | XING2 3110 | web | Publisher's page; dimensions are facts |
| EMAX | RS2205 RaceSpec | web | Publisher's page; dimensions are facts |
| Pyrodrone (T-Motor spec copy) | T-Motor M1104 | web | Publisher's page; dimensions are facts |
| GetFPV (T-Motor spec copy) | T-Motor F60 Pro V | web | Publisher's page; dimensions are facts |
| GetFPV (GEPRC spec) | GEPRC EM3115 | web | Publisher's page; dimensions are facts |
Free files
★ Free files 10 parts. Generated by Xem Studio from the standard; threads are plain cylinders at major diameter. CC BY 4.0. index.json
Use this part in your AI. Your AI gets the exact sizes and files straight from Xem and can design a mount, case or adapter around it. Direct downloads here are limited to one file every 10 minutes; through your AI they are unlimited.
Connect Xem to your AI (free, no account, about a minute)
https://xemstudio.com/mcp- Claude: Add to Claude
- ChatGPT (Plus or higher): open Connectors → Advanced → turn on Developer mode → Create → paste the address, no authentication → Create.
- Cursor: install with one click. VS Code: install with one click.
| motor-1404-envelope | 1404 outrunner envelope (iFlight XING2 1404): Ø19.9 × 18.4, Ø1.5 shaft +4.0, base 9×9 M2 | STEP · STL |
| motor-1806-envelope | 1806 outrunner envelope (iFlight XING2 1806): Ø25.2 × 20.3, Ø1.5 shaft +4.0, base 12×12 M2 | STEP · STL |
| motor-2207-envelope | 2207 outrunner envelope (iFlight XING2 2207): Ø29.08 × 32.6, Ø5.0 shaft +13.5, base 16×16 M3 | STEP · STL |
| motor-2306-envelope | 2306 outrunner envelope (iFlight XING2 2306): Ø30.0 × 32.2, Ø5.0 shaft +13.5, base 16×16 M3 | STEP · STL |
| motor-2806.5-envelope | 2806.5 outrunner envelope (iFlight XING 2806.5): Ø35.06 × 36.8, Ø5.0 shaft +15.5, base 19×19 M3 | STEP · STL |
| motor-3110-envelope | 3110 outrunner envelope (iFlight XING2 3110): Ø38.72 × 39.6, Ø5.0 shaft +15.0, base 19×19 M3 | STEP · STL |
| motor-mount-plate-9x9-m2 | Motor mount plate 9×9 M2, 3 mm thick, centre clearance | STEP · STL |
| motor-mount-plate-12x12-m2 | Motor mount plate 12×12 M2, 3 mm thick, centre clearance | STEP · STL |
| motor-mount-plate-16x16-m3 | Motor mount plate 16×16 M3, 3 mm thick, centre clearance | STEP · STL |
| motor-mount-plate-19x19-m3 | Motor mount plate 19×19 M3, 3 mm thick, centre clearance | STEP · STL |
https://xemstudio.com/mcp to Claude, ChatGPT, Cursor or any MCP client (free, no account, one minute) and it can look up exact sizes, mating fits and free STEP/STL from every chat.Plain text: sheet.txt · JSON: /api/geometry?object=fpv-drone-motors

Fits with




Questions
What is a 2207 motor's mount pattern?
16 × 16 mm, M3 screws.
What does 2207 mean?
A 22 mm wide, 7 mm tall stator; the can is about 29 mm across.